Export Module
Types
Type Aliases
struct A3DChainedBuffer_t |
Fields
Functions
Detailed Description
- group a3d_write
Structures to write the ModelFile defined through this API.
Type Documentation
-
enum A3DEWriteGeomTessMode
WritingMode of the model file.
Set which kind of content should be written.
- Version
6.0
Values:
-
enumerator kA3DWriteGeomOnly
Write only geometry.
-
enumerator kA3DWriteGeomAndTess
Mixed mode: write geometry and tessellation.
-
enumerator kA3DWriteTessOnly
Write only tessellation.
-
enum A3DECompressBrepType
Level of compression used to write the model file to PRC format.
This sets the amount, in millimeters, of lossy compression that is applied to geometry. For best results when exporting geometry, use kA3DCompressionLow.
- Version
3.0
Values:
-
enumerator kA3DCompressionLow
Compression with tolerance set to 0.001 mm (low compression, high accuracy).
-
enumerator kA3DCompressionMedium
Compression with tolerance set to 0.01 mm (medium compression, medium accuracy).
-
enumerator kA3DCompressionHigh
Compression with tolerance set to 0.1 mm (high compression, low accuracy).
-
enum A3DEStepFormat
STEP formats supported for export.
- Version
3.0
Values:
-
enumerator kA3DStepAP203
AP 203 Ed 2 since.
- Version
9.1
-
enumerator kA3DStepAP214
AP 214.
-
enumerator kA3DStepAP242
AP 242.
- Version
9.1
-
enum A3DETranslateToPkPartsHealing
Control mode of the healing in TranslateToPkParts functions.
Used in A3DRWParamsTranslateToPkPartsData.
- Version
8.1
Values:
-
enumerator kA3DE_HEALING_NO
Disable healing.
-
enumerator kA3DE_HEALING_YES
Enable healing.
-
enumerator kA3DE_HEALING_ONLY_IF_NOT_PARASOLID
Enable healing only for data coming from neither Parasolid nor from any format that embeds Parasolid data (NX, SolidWorks, Solid Edge and JT) but only if the A3DRWParamsParasolidData::m_bKeepParsedEntities reading option is enabled.
-
enum A3DETranslateToPkPartsAccurate
Control mode of the accurate edge computation in TranslateToPkParts functions.
Used in A3DRWParamsTranslateToPkPartsData.
- Version
8.1
Values:
-
enumerator kA3DE_ACCURATE_NO
Disable accurate edge computation.
-
enumerator kA3DE_ACCURATE_YES
Enable accurate edge computation.
-
enumerator kA3DE_ACCURATE_ONLY_IF_NOT_PARASOLID
Enable accurate edge computation only for data coming from neither Parasolid nor from any format that embeds Parasolid data (NX, SolidWorks, Solid Edge and JT) but only if the A3DRWParamsParasolidData::m_bKeepParsedEntities reading option is enabled.
-
enum A3DETranslateToPkPartsSimplifyGeometry
Control mode of the simplify in TranslateToPkParts functions.
Used in A3DRWParamsTranslateToPkPartsData. It enables the conversion from nurbs to analytical.
- Version
8.1
Values:
-
enumerator kA3DE_SIMPLIFY_NO
Disable simplify.
-
enumerator kA3DE_SIMPLIFY_YES
Enable simplify.
-
enumerator kA3DE_SIMPLIFY_ONLY_IF_NOT_PARASOLID
Enable simplify only for data coming from neither Parasolid nor from any format that embeds Parasolid data (NX, SolidWorks, Solid Edge and JT) but only if the A3DRWParamsParasolidData::m_bKeepParsedEntities reading option is enabled.
-
enum A3DETranslateToPkPartsMergeEntities
Control mode of the accurate edge computation in TranslateToPkParts functions.
Used in A3DRWParamsTranslateToPkPartsData.
- Version
8.1
Values:
-
enumerator kA3DE_MERGE_NO
Disable accurate edge computation.
-
enumerator kA3DE_MERGE_YES
Enable accurate edge computation.
-
enumerator kA3DE_MERGE_ONLY_IF_NOT_PARASOLID
Enable accurate edge computation only for data coming from neither Parasolid nor from any format that embeds Parasolid data (NX, SolidWorks, Solid Edge and JT) but only if the A3DRWParamsParasolidData::m_bKeepParsedEntities reading option is enabled.
Type Alias Documentation
-
typedef struct A3DChainedBuffer_t A3DChainedBuffer
A structure that contains chained buffers.
It is used to by:
A3DChainedBufferFree This structure can be used directly when loading a file from a buffer in Parasolid.
- Version
4.0
Function Documentation
-
A3DStatus A3DAsmModelFileExportToPrcFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportPrcData *pParamsExportData, const A3DUTF8Char *pcCADFileName, A3DRWParamsPrcWriteHelper **ppPrcWriteHelper)
Writes a model file to a physical file in a PRC format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
3.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
ppPrcWriteHelper – [inout] Used to get PRC data such as unique identifiers of PRC nodes.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DVoid A3DRWParamsPrcWriteHelperFree(A3DRWParamsPrcWriteHelper *pA3DRWParamsPrcWriteHelper)
Free PRC write helper.
Remark
Because this function does not return A3DStatus the internal thread safety policy is to wait for the availability of the API.
- Version
3.0
- Parameters
pA3DRWParamsPrcWriteHelper – [inout] The helper to free.
-
A3DStatus A3DAsmModelFileExportToU3DFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportU3DData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in Universal 3D format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
4.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToStepFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportStepData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in STEP format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
3.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToJTFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportJTData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in JT format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
6.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToVrmlFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in VRML format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
6.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INVALID_LICENSE –
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToIgesFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportIgesData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in IGES format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
3.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToStlFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportStlData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in STL format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
3.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportTo3mfFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExport3mfData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in 3MF format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
10.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToXMLFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportXMLData *pParamsExportData, const A3DUTF8Char *pcXMLFileName, unsigned int *uMapSize, unsigned int **puMapXmlIds, A3DEntity ***ppMapProductOccurrences)
Writes a model file to a physical file in XML format.
This function writes the A3DAsmModelFile entity to a physical file, and fills two arrays of size uMapSize (puMapXmlId and ppMapProductOccurrences) that will act as a map of the product occurrences and their respective IDs in the XML file.
- Version
7.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcXMLFileName – [in] References the path of the file into which the function stores the model file.
uMapSize – [out] Size of the two following arrays. If set to NULL, the map construction is bypassed.
puMapXmlIds – [out] Array of the product occurrence IDs in the XML file. If set to NULL, the map construction is bypassed. It has to be freed with the custom free memory callback.
ppMapProductOccurrences – [out] Array of the product occurrences in the XML file. If set to NULL, the map construction is bypassed. It has to be freed with the custom free memory callback.
- Return values
A3D_INVALID_LICENSE –
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToObjFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportObjData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in OBJ format (with MTL for the materials).
This function writes the A3DAsmModelFile entity to a physical file.
- Version
12.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToFbxFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportFbxData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in FBX format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
12.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToGltfFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportGltfData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in GLTF/GLB format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
12.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DFileContextDelete(A3DFileContextData *pData)
This function is used to free memory allocated by following functions: A3DAsmGetFilesContextsFromModelFile .
- Version
8.1
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileLoadFromPRCFiles(const A3DUTF8Char *pcRootPrcFilePath, const A3DUns32 uNbFile, const A3DUTF8Char **ppPRCFilePath, const A3DUTF8Char **ppCADFilePath, const A3DRWParamsLoadData *pParamsLoadData, A3DAsmModelFile **pA3DAsmModelFile)
Creates a model file from multiple PRC files + a PRC assembly file + a map for file names.
This function inserts all the parts and product occurrences from a file list into a single PRC assembly file loaded in “assembly NO Dependency” mode and outputs a reassembled model file.
- Version
7.1
- Parameters
pcRootPrcFilePath – [in] The file name of the top assembly file. This model file is loaded as assembly tree only and saved as a PRC file.
uNbFile – [in] The number of file names to plug into the assembly.
ppPRCFilePath – [in] The equivalent PRC file paths for parts. Length must equal uNbFile.
ppCADFilePath – [in] The native part file paths. Length must equal uNbFile.
pParamsLoadData – [in] The parameters to use when reading the model files. Configuration must be set to read the default entry or must only specify a single entry to read.
pA3DAsmModelFile – [out] The final reassembled model file.
- Return values
A3D_ERROR –
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_DATA –
A3D_LOAD_INVALID_FILE_NAME –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileLoadFromMultiplePrcFile(const A3DUTF8Char *pcFileName, const A3DUns32 uNbPart, const A3DUTF8Char **ppCADFilePath, const A3DUTF8Char **ppPRCFilePath, const A3DRWParamsLoadData *pParamsLoadData, A3DAsmModelFile **pA3DAsmModelFile)
Creates a model file from multiple PRC files + an PRC assembly file + a map for file names.
This function replugs all the parts from a list from a PRC file loaded with an “assembly tree only” mode.
- Version
5.0
- Parameters
pcFileName – [in] The file name of the top assembly file. Conceived for model file loaded as assembly tree only and saved as a PRC file.
uNbPart – [in] The number of file names to plug.
ppCADFilePath – [in] The native part file paths. Length must equal uNbPart.
ppPRCFilePath – [in] The equivalent PRC file paths for parts. Length must equal uNbPart.
pParamsLoadData – [in] The read/write parameters use the model file. Configurations must be set (default or numEntries = 1).
pA3DAsmModelFile – [out] The final reassembled model file.
- Return values
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToParasolidFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportParasolidData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in Parasolid format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
3.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DChainedBufferFree(A3DChainedBuffer *pBuffer)
This function is used to free memory allocated by following functions: A3DAsmModelFileExportToParasolidBuffer A3DRepresentationItemExportToParasolidBuffer A3DAsmModelFileExportToAcisBuffer A3DRepresentationItemExportToAcisBuffer A3DChainedBufferFree .
- Version
4.0
-
A3DStatus A3DAsmModelFileExportToParasolidBuffer(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportParasolidData *pParamsExportData, A3DChainedBuffer **pBuffer)
Writes a model file to a buffer in Parasolid format.
This function writes the A3DAsmModelFile entity to a buffer.
- Version
4.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pBuffer – [out] References the chained buffer to be filled.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DRepresentationItemExportToParasolidFile(const A3DRiRepresentationItem *pRepItem, const A3DUTF8Char *pcTempFileName, A3DDouble dUnit)
Writes a representation item to a file in Parasolid format.
This function writes the A3DAsmModelFile entity to a file.
- Version
4.0
- Parameters
pRepItem – [in] References the A3DRiRepresentationItem to be written out.
pcTempFileName – [inout] References the output file to be written.
dUnit – [in] References the wanted unit for the RI.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DRepresentationItemExportToParasolidBuffer(const A3DRiRepresentationItem *pRepItem, A3DChainedBuffer **pBuffer, double dUnit)
Writes a representation item to a buffer in Parasolid format.
This function writes the A3DRiRepresentationItem entity to a buffer.
- Version
4.0
- Parameters
pRepItem – [in] References the A3DRiRepresentationItem to be written out.
pBuffer – [in] References the chained buffer to be filled.
dUnit – [in] References the wanted unit for the RI.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileTranslateToPkParts(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportParasolidData *pParamsExportData, const A3DRWParamsTranslateToPkPartsData *pParamsTranslateToPkPartsData, int *pNbPkParts, int **pPkParts)
Writes a model file to parts in the current Parasolid session.
This function writes the A3DAsmModelFile entity to parts in the current Parasolid session.
- Version
8.1
- Version
8.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pParamsTranslateToPkPartsData – [in] References the parameters to export in the Parasolid session.
pNbPkParts – [out] References the number of resulting parts.
pPkParts – [out] References the array of resulting parts. Memory for the pPkParts array should be allocated and freed in Parasolid.
- Return values
`A3D_SUCCESS` – In case of success.
`A3D_INITIALIZE_NOT_CALLED` – if the library is not initialized.
`A3D_INVALID_DATA_STRUCT_NULL` – if either
pParamsExportDataorpParamsTranslateToPkPartsDatais null`A3D_INVALID_DATA_STRUCT_SIZE` – if either
pParamsExportDataorpParamsTranslateToPkPartsDatais incorrectly initialized`A3D_INVALID_ENTITY_NULL` – if
pA3DAsmModelFileis null`A3D_INVALID_ENTITY_TYPE` – if
pA3DAsmModelFilereferences an invalid entity typeA3D_PARASOLID_MEMORY_ERROR – if Parasolid is out of memory
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DRepresentationItemTranslateToPkParts(const A3DRiRepresentationItem *pRepItem, const A3DRWParamsTranslateToPkPartsData *pParamsTranslateToPkPartsData, double dUnit, int *pNbPkParts, int **pPkParts)
Writes a representation item to parts in the current Parasolid session.
This function writes the A3DRiRepresentationItem entity to parts in the current Parasolid session.
- Version
8.1
- Version
8.0
- Parameters
pRepItem – [in] References the A3DRiRepresentationItem to be written out.
pParamsTranslateToPkPartsData – [in] References the parameters to export in the Parasolid session.
dUnit – [in] References the wanted unit for the RI.
pNbPkParts – [out] References the number of resulting parts.
pPkParts – [out] References the array of resulting parts.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_PARASOLID_MEMORY_ERROR –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DRepresentationItemsTranslateToPkPartsMultiProcess(A3DUns32 uiNbProc, A3DRWParamsTranslateToPkPartsData const *pParamsTranslateToPkPartsData, A3DUns32 uiNbRepItem, A3DRiRepresentationItem const **pRepItem, A3DDouble const *padUnit, int **pNbPkParts, int ***pPkParts)
Writes a representation item to parts in the current Parasolid session in multi-process context.
This function writes the A3DRiRepresentationItem entity to parts in the current Parasolid session.
- Version
8.1
- Version
9.2
- Parameters
uiNbProc – [in] References the number of processes on which to run
pParamsTranslateToPkPartsData – [in] References the parameters to export in the Parasolid session.
uiNbRepItem – [in] References the number of A3DRiRepresentationItem to be written out.
pRepItem – [in] References the array of A3DRiRepresentationItem to be written out.
padUnit – [in] References the array of wanted units for the RI.
pNbPkParts – [out] References the array of numbers of resulting parts.
pPkParts – [out] References the array of arrays of resulting parts.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_PARASOLID_MEMORY_ERROR –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DHealPkParts(int *pNbPkParts, int **pPkParts, const A3DRWParamsTranslateToPkPartsData *pParamsTranslateToPkPartsData)
Heal parts in the current Parasolid session.
- Version
8.1
- Version
9.1
- Parameters
pNbPkParts – [in] References the number of resulting parts.
pPkParts – [inout] References the array of resulting parts.
pParamsTranslateToPkPartsData – [in] References the parameters to export in the Parasolid session.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DMiscPKMapperGetPKEntitiesFromA3DEntity(const A3DMiscPKMapper *pMapper, const A3DEntity *pA3DEntity, int *piNbPKEntities, int **ppPKEntities)
Get Parasolid entities from HOOPS Exchange entity.
- Version
9.0
- Parameters
pMapper – [in] Topology entities mapper
pA3DEntity – [in] The HOOPS Exchange entity
piNbPKEntities – [out] Number of Parasolid entities in the following array
ppPKEntities – [out] Array of Parasolid entities. This array is internal to the A3DMiscPKMapper and should not be modified (changing it will compromise the A3DMiscPKMapper). The lifetime of this array is the same as the lifetime of the A3DMiscPKMapper.
- Return values
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DMiscPKMapperGetA3DEntitiesFromPKEntity(const A3DMiscPKMapper *pMapper, int pPKEntity, int *piNbA3DEntities, A3DEntity ***ppA3DEntities)
Get HOOPS Exchange entities from Parasolid entity.
- Version
9.0
- Parameters
pMapper – [in] Topology entities mapper
pPKEntity – [in] The Parasolid entity
piNbA3DEntities – [out] Number of HOOPS Exchange entities in the following array
ppA3DEntities – [out] Array of HOOPS Exchange entities. This array is internal to the A3DMiscPKMapper and shouldn’t be modified (changing it will compromise the A3DMiscPKMapper). The lifetime of this array is the same as the lifetime of the A3DMiscPKMapper.
- Return values
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToParasolidFileWithMapper(const A3DAsmModelFile *pA3DAsmModelFile, A3DMiscPKMapper *pMapper, const A3DRWParamsExportParasolidData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in Parasolid format .
This function writes the A3DAsmModelFile entity to a physical file. This function uses the PK bodies already converted and stored in the pMapper with the A3DAsmModelFile structure in order to export them as a Parasolid file.
- Version
10.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pMapper – [in] Topology entities mapper
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToParasolidBufferWithMapper(const A3DAsmModelFile *pA3DAsmModelFile, A3DMiscPKMapper *pMapper, const A3DRWParamsExportParasolidData *pParamsExportData, A3DChainedBuffer **pBuffer)
Writes a model file to a buffer in Parasolid format .
This function writes the A3DAsmModelFile entity to a physical file. This function uses the PK bodies already converted and stored in the pMapper with the A3DAsmModelFile structure in order to export them as a Parasolid file.
- Version
11.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pMapper – [in] Topology entities mapper
pParamsExportData – [in] References the parameters for export.
pBuffer – [out] Buffer.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToPrcStream(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportPrcData *pParamsExportData, A3DUTF8Char **pcStream, A3DUns32 *uLength, A3DRWParamsPrcWriteHelper **ppPrcWriteHelper)
Writes a model file to a stream buffer in a PRC format.
This function writes the A3DAsmModelFile entity to a PRC stream buffer.
- Version
4.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcStream – [out] Buffer containing the PRC content.
uLength – [out] Length of the pcStream.
ppPrcWriteHelper – [inout] Used to get PRC data such as unique identifiers of PRC nodes.
- Return values
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToAcisFile(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportAcisData *pParamsExportData, const A3DUTF8Char *pcCADFileName)
Writes a model file to a physical file in ACIS format.
This function writes the A3DAsmModelFile entity to a physical file.
- Version
5.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pcCADFileName – [in] References the path of the file into which the function stores the model file.
- Return values
A3D_INVALID_LICENSE –
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DAsmModelFileExportToAcisBuffer(const A3DAsmModelFile *pA3DAsmModelFile, const A3DRWParamsExportAcisData *pParamsExportData, A3DChainedBuffer **pBuffer)
Writes a model file to a buffer in binary ACIS format.
This function writes the A3DAsmModelFile entity to a buffer.
- Version
5.0
- Parameters
pA3DAsmModelFile – [in] References the A3DAsmModelFile to be written out.
pParamsExportData – [in] References the parameters for export.
pBuffer – [out] Buffer.
- Return values
A3D_INVALID_LICENSE –
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
-
A3DStatus A3DRepresentationItemExportToAcisBuffer(const A3DRiRepresentationItem *pRepItem, A3DChainedBuffer **pBuffer, double dScale)
Writes a representation item to a buffer in binary ACIS format.
This function writes the A3DRiRepresentationItem entity to a buffer.
- Version
7.2
- Parameters
pRepItem – [in] References the A3DRiRepresentationItem to be written out.
pBuffer – [in] Buffer.
dScale – [in] Scale applied to the representation item.
- Return values
A3D_INVALID_LICENSE –
A3D_INITIALIZE_NOT_CALLED –
A3D_INVALID_ENTITY_NULL –
A3D_INVALID_ENTITY_TYPE –
A3D_INVALID_DATA_STRUCT_NULL –
A3D_INVALID_DATA_STRUCT_SIZE –
A3D_WRITE_INVALID_FILE_NAME –
A3D_WRITE_ERROR –
A3D_WRITE_CANNOT_LOAD_WRITER –
A3D_SUCCESS –
- Returns
A3D_SUCCESS in case of success or an error code
