#include <hps.h>

Inheritance diagram for HPS::ShellKey:

Public Member Functions
void	ComputeRelation (PointArray const &in_points, ShellRelationOptionsKit const &in_options, ShellRelationResultsKit &out_results) const

void	ComputeRelation (ShellKey const &in_points_source, ShellRelationOptionsKit const &in_options, ShellRelationResultsKit &out_results) const

void	ComputeRelation (ShellKit const &in_points_source, ShellRelationOptionsKit const &in_options, ShellRelationResultsKit &out_results) const

void	Consume (ShellKit &in_kit)

ShellKey &	EditFacelistByDeletion (size_t in_offset, size_t in_count)

ShellKey &	EditFacelistByInsertion (size_t in_offset, size_t in_count, int const in_facelist[])

ShellKey &	EditFacelistByInsertion (size_t in_offset, IntArray const &in_facelist)

ShellKey &	EditFacelistByReplacement (size_t in_offset, size_t in_count, int const in_facelist[])

ShellKey &	EditFacelistByReplacement (size_t in_offset, IntArray const &in_facelist)

ShellKey &	EditPointsByDeletion (size_t in_offset, size_t in_count)

ShellKey &	EditPointsByInsertion (size_t in_offset, size_t in_count, Point const in_points[])

ShellKey &	EditPointsByInsertion (size_t in_offset, PointArray const &in_points)

ShellKey &	EditPointsByReplacement (size_t in_offset, size_t in_count, Point const in_points[])

ShellKey &	EditPointsByReplacement (size_t in_offset, PointArray const &in_points)

size_t	GetFaceCount () const

size_t	GetPointCount () const

HPS::Type	ObjectType () const

ShellKey &	operator= (ShellKey const &other)

ShellKey &	operator= (ShellKey &&in_that)

void	Optimize (ShellOptimizationOptionsKit const &in_shell_optimization_kit)

void	Set (ShellKit const &in_kit)

ShellKey &	SetEdgeIndexColorsByList (SizeTArray const &in_vertices1, SizeTArray const &in_vertices2, FloatArray const &in_indices)

ShellKey &	SetEdgeIndexColorsByList (SizeTArray const &in_vertices1, SizeTArray const &in_vertices2, float in_index)

ShellKey &	SetEdgeIndexColorsByList (size_t in_count, size_t const in_vertices1[], size_t const in_vertices2[], float const in_indices[])

ShellKey &	SetEdgeIndexColorsByList (size_t in_count, size_t const in_vertices1[], size_t const in_vertices2[], float in_index)

ShellKey &	SetEdgeRGBColorsByList (SizeTArray const &in_vertices1, SizeTArray const &in_vertices2, RGBColorArray const &in_rgb_colors)

ShellKey &	SetEdgeRGBColorsByList (SizeTArray const &in_vertices1, SizeTArray const &in_vertices2, RGBColor const &in_rgb_color)

ShellKey &	SetEdgeRGBColorsByList (size_t in_count, size_t const in_vertices1[], size_t const in_vertices2[], RGBColor const in_rgb_colors[])

ShellKey &	SetEdgeRGBColorsByList (size_t in_count, size_t const in_vertices1[], size_t const in_vertices2[], RGBColor const in_rgb_color)

ShellKey &	SetEdgeVisibilitiesByList (size_t in_count, size_t const in_vertices1[], size_t const in_vertices2[], bool const in_visibilities[])

ShellKey &	SetEdgeVisibilitiesByList (size_t in_count, size_t const in_vertices1[], size_t const in_vertices2[], bool in_visibility)

ShellKey &	SetEdgeVisibilitiesByList (SizeTArray const &in_vertices1, SizeTArray const &in_vertices2, bool in_visibility)

ShellKey &	SetEdgeVisibilitiesByList (SizeTArray const &in_vertices1, SizeTArray const &in_vertices2, BoolArray const &in_visibilities)

ShellKey &	SetFaceIndexColorsByList (size_t in_count, size_t const in_faces[], float const in_indices[])

ShellKey &	SetFaceIndexColorsByList (SizeTArray const &in_faces, FloatArray const &in_indices)

ShellKey &	SetFaceIndexColorsByList (size_t in_count, size_t const in_faces[], float in_index)

ShellKey &	SetFaceIndexColorsByList (SizeTArray const &in_faces, float in_index)

ShellKey &	SetFaceIndexColorsByRange (size_t in_start, size_t in_count, float const in_indices[])

ShellKey &	SetFaceIndexColorsByRange (size_t in_start, FloatArray const &in_indices)

ShellKey &	SetFaceIndexColorsByRange (size_t in_start, size_t in_count, float in_index)

ShellKey &	SetFacelist (IntArray const &in_facelist)

ShellKey &	SetFacelist (size_t in_count, int const in_facelist [])

ShellKey &	SetFaceNormalsByList (size_t in_count, size_t const in_faces[], Vector const in_normals[])

ShellKey &	SetFaceNormalsByList (SizeTArray const &in_faces, VectorArray const &in_normals)

ShellKey &	SetFaceNormalsByList (size_t in_count, size_t const in_faces[], Vector const &in_normal)

ShellKey &	SetFaceNormalsByList (SizeTArray const &in_faces, Vector const &in_normal)

ShellKey &	SetFaceNormalsByRange (size_t in_start, size_t in_count, Vector const in_normals[])

ShellKey &	SetFaceNormalsByRange (size_t in_start, VectorArray const &in_normals)

ShellKey &	SetFaceNormalsByRange (size_t in_start, size_t in_count, Vector const &in_normal)

ShellKey &	SetFaceRGBColorsByList (size_t in_count, size_t const in_faces[], RGBColor const in_rgb_colors[])

ShellKey &	SetFaceRGBColorsByList (SizeTArray const &in_faces, RGBColorArray const &in_rgb_colors)

ShellKey &	SetFaceRGBColorsByList (size_t in_count, size_t const in_faces[], RGBColor const &in_rgb_color)

ShellKey &	SetFaceRGBColorsByList (SizeTArray const &in_faces, RGBColor const &in_rgb_color)

ShellKey &	SetFaceRGBColorsByRange (size_t in_start, size_t in_count, RGBColor const in_rgb_colors[])

ShellKey &	SetFaceRGBColorsByRange (size_t in_start, RGBColorArray const &in_rgb_colors)

ShellKey &	SetFaceRGBColorsByRange (size_t in_start, size_t in_count, RGBColor const &in_rgb_color)

ShellKey &	SetFaceVisibilitiesByList (size_t in_count, size_t const in_faces[], bool const in_visibilities[])

ShellKey &	SetFaceVisibilitiesByList (SizeTArray const &in_faces, BoolArray const &in_visibilities)

ShellKey &	SetFaceVisibilitiesByList (size_t in_count, size_t const in_faces[], bool in_visibility)

ShellKey &	SetFaceVisibilitiesByList (SizeTArray const &in_faces, bool in_visibility)

ShellKey &	SetFaceVisibilitiesByRange (size_t in_start, size_t in_count, bool const in_visibilities[])

ShellKey &	SetFaceVisibilitiesByRange (size_t in_start, BoolArray const &in_visibilities)

ShellKey &	SetFaceVisibilitiesByRange (size_t in_start, size_t in_count, bool in_visibility)

ShellKey &	SetMaterialMapping (MaterialMappingKit const &in_kit)

ShellKey &	SetPoints (PointArray const &in_points)

ShellKey &	SetPoints (size_t in_count, Point const in_points [])

ShellKey &	SetTristrips (IntArray const &in_tristrips)

ShellKey &	SetTristrips (size_t in_count, int const in_tristrips [])

ShellKey &	SetVertexIndexColorsByList (size_t in_count, size_t const in_vertices[], float const in_indices[], Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexIndexColorsByList (SizeTArray const &in_vertices, FloatArray const &in_indices, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexIndexColorsByList (size_t in_count, size_t const in_vertices[], float in_index, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexIndexColorsByList (SizeTArray const &in_vertices, float in_index, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexIndexColorsByRange (size_t in_start, size_t in_count, float const in_indices[], Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexIndexColorsByRange (size_t in_start, FloatArray const &in_indices, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexIndexColorsByRange (size_t in_start, size_t in_count, float in_index, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexNormalsByList (size_t in_count, size_t const in_vertices[], Vector const in_normals[])

ShellKey &	SetVertexNormalsByList (SizeTArray const &in_vertices, VectorArray const &in_normals)

ShellKey &	SetVertexNormalsByList (size_t in_count, size_t const in_vertices[], Vector const &in_normal)

ShellKey &	SetVertexNormalsByList (SizeTArray const &in_vertices, Vector const &in_normal)

ShellKey &	SetVertexNormalsByRange (size_t in_start, size_t in_count, Vector const in_normals[])

ShellKey &	SetVertexNormalsByRange (size_t in_start, VectorArray const &in_normals)

ShellKey &	SetVertexNormalsByRange (size_t in_start, size_t in_count, Vector const &in_normal)

ShellKey &	SetVertexParametersByList (size_t in_vertex_count, size_t const in_vertices[], size_t in_param_count, float const in_params[], size_t in_param_width=2)

ShellKey &	SetVertexParametersByList (SizeTArray const &in_vertices, FloatArray const &in_params, size_t in_param_width=2)

ShellKey &	SetVertexParametersByRange (size_t in_start, size_t in_param_count, float const in_params[], size_t in_param_width=2)

ShellKey &	SetVertexParametersByRange (size_t in_start, FloatArray const &in_params, size_t in_param_width=2)

ShellKey &	SetVertexRGBAColorsByList (size_t in_count, size_t const in_vertices[], RGBAColor const in_rgba_colors[], Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBAColorsByList (SizeTArray const &in_vertices, RGBAColorArray const &in_rgba_colors, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBAColorsByList (size_t in_count, size_t const in_vertices[], RGBAColor const &in_rgba_color, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBAColorsByList (SizeTArray const &in_vertices, RGBAColor const &in_rgba_color, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBAColorsByRange (size_t in_start, size_t in_count, RGBAColor const in_rgba_colors[], Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBAColorsByRange (size_t in_start, RGBAColorArray const &in_rgba_colors, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBAColorsByRange (size_t in_start, size_t in_count, RGBAColor const &in_rgba_color, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBColorsByList (size_t in_count, size_t const in_vertices[], RGBColor const in_rgb_colors[], Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBColorsByList (SizeTArray const &in_vertices, RGBColorArray const &in_rgb_colors, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBColorsByList (size_t in_count, size_t const in_vertices[], RGBColor const &in_rgb_color, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBColorsByList (SizeTArray const &in_vertices, RGBColor const &in_rgb_color, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBColorsByRange (size_t in_start, size_t in_count, RGBColor const in_rgb_colors[], Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBColorsByRange (size_t in_start, RGBColorArray const &in_rgb_colors, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexRGBColorsByRange (size_t in_start, size_t in_count, RGBColor const &in_rgb_color, Shell::Component in_apply_to=Shell::Component::Faces)

ShellKey &	SetVertexVisibilitiesByList (size_t in_count, size_t const in_vertices[], bool const in_visibilities[])

ShellKey &	SetVertexVisibilitiesByList (SizeTArray const &in_vertices, BoolArray const &in_visibilities)

ShellKey &	SetVertexVisibilitiesByList (size_t in_count, size_t const in_vertices[], bool in_visibility)

ShellKey &	SetVertexVisibilitiesByList (SizeTArray const &in_vertices, bool in_visibility)

ShellKey &	SetVertexVisibilitiesByRange (size_t in_start, size_t in_count, bool const in_visibilities[])

ShellKey &	SetVertexVisibilitiesByRange (size_t in_start, BoolArray const &in_visibilities)

ShellKey &	SetVertexVisibilitiesByRange (size_t in_start, size_t in_count, bool in_visibility)

	ShellKey ()

	ShellKey (Key const &in_that)

	ShellKey (ShellKey const &in_that)

	ShellKey (ShellKey &&in_that)

void	Show (ShellKit &out_kit) const

bool	ShowEdgeColors (SizeTArray &out_vertices1, SizeTArray &out_vertices2, HPS::MaterialTypeArray &out_types, HPS::RGBColorArray &out_rgb_colors, HPS::FloatArray &out_indices)

bool	ShowEdgeColorsByList (SizeTArray const &in_vertices1, SizeTArray const &in_vertices2, HPS::MaterialTypeArray &out_types, HPS::RGBColorArray &out_rgb_colors, HPS::FloatArray &out_indices)

bool	ShowEdgeVisibilitiesByList (SizeTArray const &in_vertices1, SizeTArray const &in_vertices2, BoolArray &out_validities, BoolArray &out_visibilities) const

bool	ShowFaceColors (MaterialTypeArray &out_types, RGBColorArray &out_rgb_colors, FloatArray &out_indices) const

bool	ShowFaceColorsByList (SizeTArray const &in_faces, MaterialTypeArray &out_types, RGBColorArray &out_rgb_colors, FloatArray &out_indices) const

bool	ShowFaceColorsByRange (size_t in_start, size_t in_count, MaterialTypeArray &out_types, RGBColorArray &out_rgb_colors, FloatArray &out_indices) const

bool	ShowFacelist (IntArray &out_facelist) const

bool	ShowFaceNormals (BoolArray &out_validities, VectorArray &out_normals) const

bool	ShowFaceNormalsByList (SizeTArray const &in_faces, BoolArray &out_validities, VectorArray &out_normals) const

bool	ShowFaceNormalsByRange (size_t in_start, size_t in_count, BoolArray &out_validities, VectorArray &out_normals) const

bool	ShowFaceVisibilities (BoolArray &out_validities, BoolArray &out_visibilities) const

bool	ShowFaceVisibilitiesByList (SizeTArray const &in_faces, BoolArray &out_validities, BoolArray &out_visibilities) const

bool	ShowFaceVisibilitiesByRange (size_t in_start, size_t in_count, BoolArray &out_validities, BoolArray &out_visibilities) const

bool	ShowMaterialMapping (MaterialMappingKit &out_kit) const

bool	ShowNetFaceNormalsByList (SizeTArray const &in_faces, VectorArray &out_normals) const

bool	ShowNetFaceNormalsByRange (size_t in_start, size_t in_count, VectorArray &out_normals) const

bool	ShowNetVertexNormals (VectorArray &out_normals, Drawing::Handedness in_polygon_handedness=Drawing::Handedness::None) const

bool	ShowNetVertexNormalsByRange (size_t in_start, size_t in_count, VectorArray &out_normals, Drawing::Handedness in_polygon_handedness=Drawing::Handedness::None) const

bool	ShowPoints (PointArray &out_points) const

bool	ShowPointsByList (SizeTArray const &in_indices, PointArray &out_points) const

bool	ShowPointsByList (size_t in_count, size_t const in_indices[], PointArray &out_points) const

bool	ShowPointsByRange (size_t in_start_index, size_t in_count, PointArray &out_points) const

bool	ShowTristrips (IntArray &out_tristrips) const

bool	ShowTristrips (IntArray &out_tristrips, IntArray &out_face_indices) const

bool	ShowVertexColors (Shell::Component in_apply_to, MaterialTypeArray &out_types, RGBColorArray &out_rgb_colors, RGBAColorArray &out_rgba_colors, FloatArray &out_indices) const

bool	ShowVertexColorsByList (SizeTArray const &in_vertices, Shell::Component in_apply_to, MaterialTypeArray &out_types, RGBColorArray &out_rgb_colors, RGBAColorArray &out_rgba_colors, FloatArray &out_indices) const

bool	ShowVertexColorsByRange (size_t in_start, size_t in_count, Shell::Component in_apply_to, MaterialTypeArray &out_types, RGBColorArray &out_rgb_colors, RGBAColorArray &out_rgba_colors, FloatArray &out_indices) const

bool	ShowVertexNormals (BoolArray &out_validities, VectorArray &out_normals) const

bool	ShowVertexNormalsByList (SizeTArray const &in_vertices, BoolArray &out_validities, VectorArray &out_normals) const

bool	ShowVertexNormalsByRange (size_t in_start, size_t in_count, BoolArray &out_validities, VectorArray &out_normals) const

bool	ShowVertexParameters (BoolArray &out_validities, FloatArray &out_params) const

bool	ShowVertexParameters (BoolArray &out_validities, FloatArray &out_params, size_t &out_param_width) const

bool	ShowVertexParametersByList (SizeTArray const &in_vertices, BoolArray &out_validities, FloatArray &out_params) const

bool	ShowVertexParametersByList (SizeTArray const &in_vertices, BoolArray &out_validities, FloatArray &out_params, size_t &out_param_width) const

bool	ShowVertexParametersByRange (size_t in_start, size_t in_count, BoolArray &out_validities, FloatArray &out_params) const

bool	ShowVertexParametersByRange (size_t in_start, size_t in_count, BoolArray &out_validities, FloatArray &out_params, size_t &out_param_width) const

bool	ShowVertexVisibilities (BoolArray &out_validities, BoolArray &out_visibilities) const

bool	ShowVertexVisibilitiesByList (SizeTArray const &in_vertices, BoolArray &out_validities, BoolArray &out_visibilities) const

bool	ShowVertexVisibilitiesByRange (size_t in_start, size_t in_count, BoolArray &out_validities, BoolArray &out_visibilities) const

ShellKey &	UnsetEdgeColors ()

ShellKey &	UnsetEdgeColorsByList (SizeTArray const &in_vertices1, SizeTArray const &in_vertices2)

ShellKey &	UnsetEdgeColorsByList (size_t in_count, size_t const in_vertices1[], size_t const in_vertices2[])

ShellKey &	UnsetEdgeEverything ()

ShellKey &	UnsetEdgeVisibilities ()

ShellKey &	UnsetEdgeVisibilitiesByList (SizeTArray const &in_vertices1, SizeTArray const &in_vertices2)

ShellKey &	UnsetEdgeVisibilitiesByList (size_t in_count, size_t const in_vertices1[], size_t const in_vertices2[])

ShellKey &	UnsetEverything ()

ShellKey &	UnsetFaceColors ()

ShellKey &	UnsetFaceColorsByList (SizeTArray const &in_vertices)

ShellKey &	UnsetFaceColorsByList (size_t in_count, size_t const in_faces[])

ShellKey &	UnsetFaceColorsByRange (size_t in_start, size_t in_count)

ShellKey &	UnsetFaceEverything ()

ShellKey &	UnsetFacelist ()

ShellKey &	UnsetFaceNormals ()

ShellKey &	UnsetFaceNormalsByList (SizeTArray const &in_vertices)

ShellKey &	UnsetFaceNormalsByRange (size_t in_start, size_t in_count)

ShellKey &	UnsetFaceVisibilities ()

ShellKey &	UnsetFaceVisibilitiesByList (size_t in_count, size_t const in_faces[])

ShellKey &	UnsetFaceVisibilitiesByList (SizeTArray const &in_vertices)

ShellKey &	UnsetFaceVisibilitiesByRange (size_t in_start, size_t in_count)

ShellKey &	UnsetMaterialMapping ()

ShellKey &	UnsetPoints ()

ShellKey &	UnsetTristrips ()

ShellKey &	UnsetVertexColors ()

ShellKey &	UnsetVertexColors (Shell::Component in_apply_to)

ShellKey &	UnsetVertexColorsByList (size_t in_count, size_t const in_vertices[])

ShellKey &	UnsetVertexColorsByList (size_t in_count, size_t const in_vertices[], Shell::Component in_apply_to)

ShellKey &	UnsetVertexColorsByList (SizeTArray const &in_vertices)

ShellKey &	UnsetVertexColorsByList (SizeTArray const &in_vertices, Shell::Component in_apply_to)

ShellKey &	UnsetVertexColorsByRange (size_t in_start, size_t in_count)

ShellKey &	UnsetVertexColorsByRange (size_t in_start, size_t in_count, Shell::Component in_apply_to)

ShellKey &	UnsetVertexEverything ()

ShellKey &	UnsetVertexNormals ()

ShellKey &	UnsetVertexNormalsByList (SizeTArray const &in_vertices)

ShellKey &	UnsetVertexNormalsByRange (size_t in_start, size_t in_count)

ShellKey &	UnsetVertexParameters ()

ShellKey &	UnsetVertexParametersByList (SizeTArray const &in_vertices)

ShellKey &	UnsetVertexParametersByRange (size_t in_start, size_t in_count)

ShellKey &	UnsetVertexVisibilities ()

ShellKey &	UnsetVertexVisibilitiesByList (size_t in_count, size_t const in_vertices[])

ShellKey &	UnsetVertexVisibilitiesByList (SizeTArray const &in_vertices)

ShellKey &	UnsetVertexVisibilitiesByRange (size_t in_start, size_t in_count)

Public Member Functions inherited from HPS::GeometryKey
	GeometryKey ()

	GeometryKey (Key const &in_that)

	GeometryKey (GeometryKey const &in_that)

	GeometryKey (GeometryKey &&in_that)

GeometryKey &	operator= (GeometryKey const &in_that)

GeometryKey &	operator= (GeometryKey &&in_that)

GeometryKey &	SetPriority (int in_priority)

GeometryKey &	SetUserData (intptr_t in_index, size_t in_bytes, byte const in_data[])

GeometryKey &	SetUserData (intptr_t in_index, ByteArray const &in_data)

GeometryKey &	SetUserData (IntPtrTArray const &in_indices, ByteArrayArray const &in_data)

bool	ShowBounding (BoundingKit &out_kit) const

bool	ShowPriority (int &out_priority) const

size_t	ShowReferrers (SegmentKeyArray &out_segments) const

size_t	ShowReferrers (ReferenceKeyArray &out_references) const

bool	ShowUserData (intptr_t in_index, ByteArray &out_data) const

bool	ShowUserData (IntPtrTArray &out_indices, ByteArrayArray &out_data) const

size_t	ShowUserDataCount () const

bool	ShowUserDataIndices (IntPtrTArray &out_indices) const

GeometryKey &	UnsetAllUserData ()

GeometryKey &	UnsetPriority ()

GeometryKey &	UnsetUserData (intptr_t in_index)

GeometryKey &	UnsetUserData (size_t in_count, intptr_t const in_indices[])

GeometryKey &	UnsetUserData (IntPtrTArray const &in_indices)

Public Member Functions inherited from HPS::Key
virtual void	Assign (Key const &in_that)

Key	CopyTo (SegmentKey const &in_destination) const

void	Delete ()

bool	Equals (Key const &in_that) const

size_t	GetHash () const

bool	HasOwner () const

	Key ()

	Key (Key const &in_that)

	Key (Control const &in_control)

	Key (Key &&in_that)

void	MoveTo (SegmentKey const &in_new_owner)

bool	operator!= (Key const &in_that) const

Key &	operator= (Key &&in_that)

Key &	operator= (Key const &in_that)

bool	operator== (Key const &in_that) const

SegmentKey	Owner () const

SegmentKey	Up () const

virtual	~Key ()

Public Member Functions inherited from HPS::Object
virtual bool	Empty () const

intptr_t	GetClassID () const

intptr_t	GetInstanceID () const

bool	HasType (HPS::Type in_mask) const

	Object (Object const &that)

	Object (Object &&in_that)

Object &	operator= (Object const &other_object)

Object &	operator= (Object &&in_that)

virtual void	Reset ()

virtual HPS::Type	Type () const

Static Public Attributes
static const HPS::Type	staticType = HPS::Type::ShellKey

Static Public Attributes inherited from HPS::GeometryKey
static const HPS::Type	staticType = HPS::Type::GeometryKey

Static Public Attributes inherited from HPS::Key
static const HPS::Type	staticType = HPS::Type::Key

Static Public Attributes inherited from HPS::Object
static const HPS::Type	staticType = HPS::Type::None

Additional Inherited Members
Static Public Member Functions inherited from HPS::Object
template<typename T >
static intptr_t	ClassID ()

Detailed Description

The ShellKey class is a smart pointer to a database object. It is a handle to a shell created by SegmentKey::InsertShell.

Constructor & Destructor Documentation

◆ ShellKey() [1/4]

HPS::ShellKey::ShellKey ( )

The default constructor creates an uninitialized ShellKey object. The Type() function will return Type::None.

◆ ShellKey() [2/4]

HPS::ShellKey::ShellKey ( Key const & in_that )

explicit

This constructor creates an ShellKey object that shares the underlying smart-pointer of the source Key. The copy will only be successful if the source key is really an upcast of a shell key. Otherwise the copy will fail and the resulting ShellKey will be invalid.

Parameters

in_key The source Key to copy.

◆ ShellKey() [3/4]

HPS::ShellKey::ShellKey ( ShellKey const & in_that )

The copy constructor creates a ShellKey object that shares the underlying smart-pointer of the source ShellKey.

Parameters

in_that The source ShellKey to copy.

◆ ShellKey() [4/4]

HPS::ShellKey::ShellKey ( ShellKey && in_that )

The move constructor creates a ShellKey by transferring the underlying impl of the rvalue reference to this ShellKey thereby avoiding a copy and allocation.

Parameters

in_that An rvalue reference to a ShellKey to take the impl from.

Member Function Documentation

◆ ComputeRelation() [1/3]

void HPS::ShellKey::ComputeRelation	(	PointArray const &	in_points,
		ShellRelationOptionsKit const &	in_options,
		ShellRelationResultsKit &	out_results
	)		const

Computes the relation of a collection of points to this shell, subject to the specified options.

Parameters

in_points	An array of points to test against this shell.
in_options	The options to use when performing the relation test.
out_results	The results of the relation test.

◆ ComputeRelation() [2/3]

void HPS::ShellKey::ComputeRelation	(	ShellKey const &	in_points_source,
		ShellRelationOptionsKit const &	in_options,
		ShellRelationResultsKit &	out_results
	)		const

Computes the relation of a collection of points to this shell, subject to the specified options.

Parameters

in_points_source	A shell whose points should be tested against this shell.
in_options	The options to use when performing the relation test.
out_results	The results of the relation test.

◆ ComputeRelation() [3/3]

void HPS::ShellKey::ComputeRelation	(	ShellKit const &	in_points_source,
		ShellRelationOptionsKit const &	in_options,
		ShellRelationResultsKit &	out_results
	)		const

Computes the relation of a collection of points to this shell, subject to the specified options.

Parameters

in_points_source	A shell whose points should be tested against this shell.
in_options	The options to use when performing the relation test.
out_results	The results of the relation test.

◆ Consume()

void HPS::ShellKey::Consume ( ShellKit & in_kit )

Completely replaces all settings on this ShellKey with those set on the specified kit and resets the kit.

Parameters

in_kit The kit from which to get the settings to replace on this ShellKey.

◆ EditFacelistByDeletion()

ShellKey& HPS::ShellKey::EditFacelistByDeletion	(	size_t	in_offset,
		size_t	in_count
	)

Removes faces from the face list for this ShellKey. This will not affect the points referenced by the removed faces, however any face attributes on the removed faces will be lost.

Parameters

in_offset	The offset into the faces for the shell at which to start removing faces. This value must be such that in_offset<face_count for deletion to succeed. This is not an offset into the raw face list, but is relative to the actual face count for the shell.
in_count	The number of faces to remove from the face list for the shell. This value must be such that in_offset+in_count<=face_count for the deletion to succeed.

Returns: A reference to this ShellKey.

◆ EditFacelistByInsertion() [1/2]

ShellKey& HPS::ShellKey::EditFacelistByInsertion	(	size_t	in_offset,
		size_t	in_count,
		int const	in_facelist[]
	)

Adds faces to the face list for this ShellKey.

Parameters

in_offset	The offset into the faces for the shell at which to insert faces. This value must be such that in_offset<face_count for insertion to succeed. This is not an offset into the raw face list, but is relative to the actual face count for the shell.
in_count	Size of the following array.
in_facelist	The faces (using the standard face-list encoding) to insert into the face list at the specified offset.

Returns: A reference to this ShellKey.

◆ EditFacelistByInsertion() [2/2]

ShellKey& HPS::ShellKey::EditFacelistByInsertion	(	size_t	in_offset,
		IntArray const &	in_facelist
	)

Adds faces to the face list for this ShellKey.

Parameters

in_offset	The offset into the faces for the shell at which to insert faces. This value must be such that in_offset<face_count for insertion to succeed. This is not an offset into the raw face list, but is relative to the actual face count for the shell.
in_facelist	The faces (using the standard face-list encoding) to insert into the face list at the specified offset.

Returns: A reference to this ShellKey.

◆ EditFacelistByReplacement() [1/2]

ShellKey& HPS::ShellKey::EditFacelistByReplacement	(	size_t	in_offset,
		size_t	in_count,
		int const	in_facelist[]
	)

Replaces faces in the face list for this ShellKey.

Parameters

in_offset	The offset into the faces for the shell at which to start replacing faces. This value must be such that in_offset<face_count for replacement to succeed. This is not an offset into the raw face list, but is relative to the actual face count for the shell.
in_count	Size of the following array.
in_facelist	The faces (using the standard face-list encoding) to use to replace those in the face list at the specified offset. The number of replacement faces must be such that in_offset+replacement_face_count<=face_count. This does not mean that the face list length must be the same, i.e., faces can use different numbers of vertices than previously, but rather is a limit on the number of faces encoded in the face list.

Returns: A reference to this ShellKey.

◆ EditFacelistByReplacement() [2/2]

ShellKey& HPS::ShellKey::EditFacelistByReplacement	(	size_t	in_offset,
		IntArray const &	in_facelist
	)

Replaces faces in the face list for this ShellKey.

Parameters

in_offset The offset into the faces for the shell at which to start replacing faces. This value must be such that in_offset<face_count for replacement to succeed. This is not an offset into the raw face list, but is relative to the actual face count for the shell.

in_facelist The faces (using the standard face-list encoding) to use to replace those in the face list at the specified offset. The number of replacement faces must be such that in_offset+replacement_face_count<=face_count. This does not mean that the face list length must be the same, i.e., faces can use different numbers of vertices than previously, but rather is a limit on the number of faces encoded in the face list.

Returns: A reference to this ShellKey.

◆ EditPointsByDeletion()

ShellKey& HPS::ShellKey::EditPointsByDeletion	(	size_t	in_offset,
		size_t	in_count
	)

Removes points from the point list for this ShellKey. Any existing faces which reference points which are being deleted will be removed. Additionally, any vertex settings on the deleted vertices, i.e., colors, normals, parameters, and visibilities, will be removed. The face list will also be updated to reflect the new vertex offsets caused by removing elements from the point list.

Parameters

in_offset	The offset into the point list for the shell at which to start removing points. This value must be such that in_offset<point_count for deletion to succeed.
in_count	The number of points to delete from the point list for the shell. This value must be such that in_offset+in_count<=point_count for the deletion to succeed.

Returns: A reference to this ShellKey.

◆ EditPointsByInsertion() [1/2]

ShellKey& HPS::ShellKey::EditPointsByInsertion	(	size_t	in_offset,
		size_t	in_count,
		Point const	in_points[]
	)

Adds points to the point list for this ShellKey. No existing faces will reference these points, i.e., the face list will be updated to reference the original vertices in their new positions. Addtionally, no vertex attributes will apply to these points, i.e., the vertex attributes will only be set on those points which had them prior to the insertion.

Parameters

in_offset	The offset into the point list for the shell at which to insert points. This value must be such that in_offset<point_count for insertion to succeed.
in_count	Size of the following array.
in_points	The points to insert into the point list at the specified offset.

Returns: A reference to this ShellKey.

◆ EditPointsByInsertion() [2/2]

ShellKey& HPS::ShellKey::EditPointsByInsertion	(	size_t	in_offset,
		PointArray const &	in_points
	)

Adds points to the point list for this ShellKey. No existing faces will reference these points, i.e., the face list will be updated to reference the original vertices in their new positions. Addtionally, no vertex attributes will apply to these points, i.e., the vertex attributes will only be set on those points which had them prior to the insertion.

Parameters

in_offset	The offset into the point list for the shell at which to insert points. This value must be such that in_offset<point_count for insertion to succeed.
in_points	The points to insert into the point list at the specified offset.

Returns: A reference to this ShellKey.

◆ EditPointsByReplacement() [1/2]

ShellKey& HPS::ShellKey::EditPointsByReplacement	(	size_t	in_offset,
		size_t	in_count,
		Point const	in_points[]
	)

Replaces points in the point list for this ShellKey. These points will replace those already referenced by any faces and will inherit any attributes the points being replaced had.

Parameters

in_offset	The offset into the point list for the shell at which to start replacing points. This value must be such that in_offset<point_count for replacement to succeed.
in_count	Size of the following array. This value must be such that in_offset+in_count<=point_count for the replacement to succeed.
in_points	The points to use to replace those in the point list at the specified offset.

Returns: A reference to this ShellKey.

◆ EditPointsByReplacement() [2/2]

ShellKey& HPS::ShellKey::EditPointsByReplacement	(	size_t	in_offset,
		PointArray const &	in_points
	)

Replaces points in the point list for this ShellKey. These points will replace those already referenced by any faces and will inherit any attributes the points being replaced had.

Parameters

in_offset	The offset into the point list for the shell at which to start replacing points. This value must be such that in_offset<point_count for replacement to succeed.
in_points	The points to use to replace those in the point list at the specified offset. This size of the array must be such that in_offset+in_points.size()<=point_count for the replacement to succeed.

Returns: A reference to this ShellKey.

◆ GetFaceCount()

size_t HPS::ShellKey::GetFaceCount ( ) const

Retrieves the number of faces in this shell. Note that this is different than the length of the face list

Returns: The number of faces in this shell.

◆ GetPointCount()

size_t HPS::ShellKey::GetPointCount ( ) const

Retrieves the number of points in this shell.

Returns: The number of points in this shell.

◆ ObjectType()

HPS::Type HPS::ShellKey::ObjectType ( ) const

inlinevirtual

This function returns the type the object, as declared (if the object is derived, this does not give the true type of the derived object).

Returns: The declared type of the object in question, which may differ from the true, underlying type.

Reimplemented from HPS::GeometryKey.

◆ operator=() [1/2]

ShellKey& HPS::ShellKey::operator= ( ShellKey const & other )

Associate this ShellKey with the same underlying impl as the source ShellKey.

Parameters

in_that The source ShellKey for the assignment.

Returns: A reference to this ShellKey.

◆ operator=() [2/2]

ShellKey& HPS::ShellKey::operator= ( ShellKey && in_that )

The move assignment operator transfers the underlying impl of the rvalue reference to this ShellKey thereby avoiding a copy.

Parameters

in_that An rvalue reference to a ShellKey to take the impl from.

Returns: A reference to this ShellKey.

◆ Optimize()

void HPS::ShellKey::Optimize ( ShellOptimizationOptionsKit const & in_shell_optimization_kit )

Optimizes the shell using the parameters set in a ShellOptimizationOptionsKit

Parameters

in_shell_optimization_options_kit The kit containing the optimization options to use.

◆ Set()

void HPS::ShellKey::Set ( ShellKit const & in_kit )

Replace those settings on this ShellKey with those set on the specified kit.

Parameters

in_kit The kit from which to get the settings to replace on this ShellKey.

◆ SetEdgeIndexColorsByList() [1/4]

ShellKey& HPS::ShellKey::SetEdgeIndexColorsByList	(	SizeTArray const &	in_vertices1,
		SizeTArray const &	in_vertices2,
		FloatArray const &	in_indices
	)

Sets edge material indices on a selection of arbitrary edges.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_indices	The material indices to set on the edges.

Returns: A reference to this ShellKey.

◆ SetEdgeIndexColorsByList() [2/4]

ShellKey& HPS::ShellKey::SetEdgeIndexColorsByList	(	SizeTArray const &	in_vertices1,
		SizeTArray const &	in_vertices2,
		float	in_index
	)

Sets edge material indices on a selection of arbitrary edges.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_index	The material index to set on the edges.

Returns: A reference to this ShellKey.

◆ SetEdgeIndexColorsByList() [3/4]

ShellKey& HPS::ShellKey::SetEdgeIndexColorsByList	(	size_t	in_count,
		size_t const	in_vertices1[],
		size_t const	in_vertices2[],
		float const	in_indices[]
	)

Sets edge material indices on a selection of arbitrary edges.

Parameters

in_count	Size of the following arrays.
in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_indices	The material indices to set on the edges.

Returns: A reference to this ShellKey.

◆ SetEdgeIndexColorsByList() [4/4]

ShellKey& HPS::ShellKey::SetEdgeIndexColorsByList	(	size_t	in_count,
		size_t const	in_vertices1[],
		size_t const	in_vertices2[],
		float	in_index
	)

Sets edge material indices on a selection of arbitrary edges.

Parameters

in_count	Size of the following arrays.
in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_index	The material index to set on the edges.

Returns: A reference to this ShellKey.

◆ SetEdgeRGBColorsByList() [1/4]

ShellKey& HPS::ShellKey::SetEdgeRGBColorsByList	(	SizeTArray const &	in_vertices1,
		SizeTArray const &	in_vertices2,
		RGBColorArray const &	in_rgb_colors
	)

Sets edge colors on a selection of arbitrary edges.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgb_colors	The colors to set on the edges.

Returns: A reference to this ShellKey.

◆ SetEdgeRGBColorsByList() [2/4]

ShellKey& HPS::ShellKey::SetEdgeRGBColorsByList	(	SizeTArray const &	in_vertices1,
		SizeTArray const &	in_vertices2,
		RGBColor const &	in_rgb_color
	)

Sets edge colors on a selection of arbitrary edges.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgb_color	The color to set on the edges.

Returns: A reference to this ShellKey.

◆ SetEdgeRGBColorsByList() [3/4]

ShellKey& HPS::ShellKey::SetEdgeRGBColorsByList	(	size_t	in_count,
		size_t const	in_vertices1[],
		size_t const	in_vertices2[],
		RGBColor const	in_rgb_colors[]
	)

Sets edge colors on a selection of arbitrary edges.

Parameters

in_count	Size of the following arrays.
in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgb_colors	The colors to set on the edges.

Returns: A reference to this ShellKey.

◆ SetEdgeRGBColorsByList() [4/4]

ShellKey& HPS::ShellKey::SetEdgeRGBColorsByList	(	size_t	in_count,
		size_t const	in_vertices1[],
		size_t const	in_vertices2[],
		RGBColor const	in_rgb_color
	)

Sets edge colors on a selection of arbitrary edges.

Parameters

in_count	Size of the following arrays.
in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgb_color	The color to set on the edges.

Returns: A reference to this ShellKey.

◆ SetEdgeVisibilitiesByList() [1/4]

ShellKey& HPS::ShellKey::SetEdgeVisibilitiesByList	(	size_t	in_count,
		size_t const	in_vertices1[],
		size_t const	in_vertices2[],
		bool const	in_visibilities[]
	)

Sets edge visibilities on a selection of arbitrary edges.

Parameters

in_count	Size of the following arrays.
in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_visibilities	The visibilities that should be set for each edge specified.

Returns: A reference to this ShellKey.

◆ SetEdgeVisibilitiesByList() [2/4]

ShellKey& HPS::ShellKey::SetEdgeVisibilitiesByList	(	size_t	in_count,
		size_t const	in_vertices1[],
		size_t const	in_vertices2[],
		bool	in_visibility
	)

Sets edge visibilities on a selection of arbitrary edges.

Parameters

in_count	Size of the following arrays.
in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_visibility	The visibility to apply to each edge specified.

Returns: A reference to this ShellKey.

◆ SetEdgeVisibilitiesByList() [3/4]

ShellKey& HPS::ShellKey::SetEdgeVisibilitiesByList	(	SizeTArray const &	in_vertices1,
		SizeTArray const &	in_vertices2,
		bool	in_visibility
	)

Sets edge visibilities on a selection of arbitrary edges.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_visibility	The visibility to apply to each edge specified.

Returns: A reference to this ShellKey.

◆ SetEdgeVisibilitiesByList() [4/4]

ShellKey& HPS::ShellKey::SetEdgeVisibilitiesByList	(	SizeTArray const &	in_vertices1,
		SizeTArray const &	in_vertices2,
		BoolArray const &	in_visibilities
	)

Sets edge visibilities on a selection of arbitrary edges.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_visibilities	The visibilities that should be set for each edge specified.

Returns: A reference to this ShellKey.

◆ SetFaceIndexColorsByList() [1/4]

ShellKey& HPS::ShellKey::SetFaceIndexColorsByList	(	size_t	in_count,
		size_t const	in_faces[],
		float const	in_indices[]
	)

Sets face material indices on a selection of arbitrary faces.

Parameters

in_count	Size of the following arrays.
in_faces	The indices of the faces on which to set the colors. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_indices	The material indices to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceIndexColorsByList() [2/4]

ShellKey& HPS::ShellKey::SetFaceIndexColorsByList	(	SizeTArray const &	in_faces,
		FloatArray const &	in_indices
	)

Sets face material indices on a selection of arbitrary faces. If the sizes of the face index and material index arrays are different, the smaller size will be used.

Parameters

in_faces	The indices of the faces on which to set the colors. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_indices	The material indices to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceIndexColorsByList() [3/4]

ShellKey& HPS::ShellKey::SetFaceIndexColorsByList	(	size_t	in_count,
		size_t const	in_faces[],
		float	in_index
	)

Sets a single material index on a selection of arbitrary faces.

Parameters

in_count	Size of the following array.
in_faces	The indices of the faces on which to set the color. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_index	The material index to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceIndexColorsByList() [4/4]

ShellKey& HPS::ShellKey::SetFaceIndexColorsByList	(	SizeTArray const &	in_faces,
		float	in_index
	)

Sets a single material index on a selection of arbitrary faces.

Parameters

in_faces	The indices of the faces on which to set the color. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_index	The material index to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceIndexColorsByRange() [1/3]

ShellKey& HPS::ShellKey::SetFaceIndexColorsByRange	(	size_t	in_start,
		size_t	in_count,
		float const	in_indices[]
	)

Sets face material indices on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting colors. This value must be such that in_start<face_count for setting to succeed.
in_count	Size of the following array. This value must be such that in_start+in_count<=face_count for the setting to succeed.
in_indices	The material indices to set on the faces for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetFaceIndexColorsByRange() [2/3]

ShellKey& HPS::ShellKey::SetFaceIndexColorsByRange	(	size_t	in_start,
		FloatArray const &	in_indices
	)

Sets face material indices on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting colors. This value must be such that in_start<face_count for setting to succeed.
in_indices	The material indices to set on the faces for this ShellKey. The size of the array must be such that in_start+in_indices.size()<=face_count for the setting to succeed.

Returns: A reference to this ShellKey.

◆ SetFaceIndexColorsByRange() [3/3]

ShellKey& HPS::ShellKey::SetFaceIndexColorsByRange	(	size_t	in_start,
		size_t	in_count,
		float	in_index
	)

Sets a single material index on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting the color. This value must be such that in_start<face_count for setting to succeed.
in_count	The number of faces on which to set the color. This value must be such that in_start+in_count<=face_count for the setting to succeed.
in_index	The material index to set on the faces for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetFacelist() [1/2]

ShellKey& HPS::ShellKey::SetFacelist ( IntArray const & in_facelist )

Replace the face list on this ShellKey with the specified face list.

Parameters

in_facelist The face list to use to replace the one for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetFacelist() [2/2]

ShellKey& HPS::ShellKey::SetFacelist	(	size_t	in_count,
		int const	in_facelist[]
	)

Replace the face list on this ShellKey with the specified face list.

Parameters

in_count	Size of the following array.
in_facelist	The face list to use to replace the one for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetFaceNormalsByList() [1/4]

ShellKey& HPS::ShellKey::SetFaceNormalsByList	(	size_t	in_count,
		size_t const	in_faces[],
		Vector const	in_normals[]
	)

Sets face normals on a selection of arbitrary faces.

Parameters

in_count	Size of the following arrays.
in_faces	The indices of the faces on which to set the normals. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_normals	The normals to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceNormalsByList() [2/4]

ShellKey& HPS::ShellKey::SetFaceNormalsByList	(	SizeTArray const &	in_faces,
		VectorArray const &	in_normals
	)

Sets face normals on a selection of arbitrary faces. If the sizes of the face index and normal arrays are different, the smaller size will be used.

Parameters

in_faces	The indices of the faces on which to set the normals. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_normals	The normals to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceNormalsByList() [3/4]

ShellKey& HPS::ShellKey::SetFaceNormalsByList	(	size_t	in_count,
		size_t const	in_faces[],
		Vector const &	in_normal
	)

Sets a single normal on a selection of arbitrary faces.

Parameters

in_count	Size of the following array.
in_faces	The indices of the faces on which to set the normal. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_normal	The normal to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceNormalsByList() [4/4]

ShellKey& HPS::ShellKey::SetFaceNormalsByList	(	SizeTArray const &	in_faces,
		Vector const &	in_normal
	)

Sets a single normal on a selection of arbitrary faces.

Parameters

in_faces	The indices of the faces on which to set the normal. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_normal	The normal to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceNormalsByRange() [1/3]

ShellKey& HPS::ShellKey::SetFaceNormalsByRange	(	size_t	in_start,
		size_t	in_count,
		Vector const	in_normals[]
	)

Sets face normals on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting normals. This value must be such that in_start<face_count for setting to succeed.
in_count	Size of the following array. This value must be such that in_start+in_count<=face_count for the setting to succeed.
in_normals	The normals to set on the faces for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetFaceNormalsByRange() [2/3]

ShellKey& HPS::ShellKey::SetFaceNormalsByRange	(	size_t	in_start,
		VectorArray const &	in_normals
	)

Sets face normals on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting normals. This value must be such that in_start<face_count for setting to succeed.
in_normals	The normals to set on the faces for this ShellKey. The size of the array must be such that in_start+in_normals.size()<=face_count for the setting to succeed.

Returns: A reference to this ShellKey.

◆ SetFaceNormalsByRange() [3/3]

ShellKey& HPS::ShellKey::SetFaceNormalsByRange	(	size_t	in_start,
		size_t	in_count,
		Vector const &	in_normal
	)

Sets a single normal on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting the normal. This value must be such that in_start<face_count for setting to succeed.
in_count	The number of faces on which to set the normal. This value must be such that in_start+in_count<=face_count for the setting to succeed.
in_normal	The normal to set on the faces for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetFaceRGBColorsByList() [1/4]

ShellKey& HPS::ShellKey::SetFaceRGBColorsByList	(	size_t	in_count,
		size_t const	in_faces[],
		RGBColor const	in_rgb_colors[]
	)

Sets face RGB colors on a selection of arbitrary faces.

Parameters

in_count	Size of the following arrays.
in_faces	The indices of the faces on which to set the colors. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_rgb_colors	The RGB colors to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceRGBColorsByList() [2/4]

ShellKey& HPS::ShellKey::SetFaceRGBColorsByList	(	SizeTArray const &	in_faces,
		RGBColorArray const &	in_rgb_colors
	)

Sets face RGB colors on a selection of arbitrary faces. If the sizes of the face index array and the color array different, the smaller size will be used.

Parameters

in_faces	The indices of the faces on which to set the colors. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_rgb_colors	The RGB colors to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceRGBColorsByList() [3/4]

ShellKey& HPS::ShellKey::SetFaceRGBColorsByList	(	size_t	in_count,
		size_t const	in_faces[],
		RGBColor const &	in_rgb_color
	)

Sets a single RGB color on a selection of arbitrary faces.

Parameters

in_count	Size of the following array.
in_faces	The indices of the faces on which to set the color. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_rgb_color	The RGB color to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceRGBColorsByList() [4/4]

ShellKey& HPS::ShellKey::SetFaceRGBColorsByList	(	SizeTArray const &	in_faces,
		RGBColor const &	in_rgb_color
	)

Sets a single RGB color on a selection of arbitrary faces.

Parameters

in_faces	The indices of the faces on which to set the color. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_rgb_color	The RGB color to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceRGBColorsByRange() [1/3]

ShellKey& HPS::ShellKey::SetFaceRGBColorsByRange	(	size_t	in_start,
		size_t	in_count,
		RGBColor const	in_rgb_colors[]
	)

Sets face RGB colors on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting colors. This value must be such that in_start<face_count for setting to succeed.
in_count	Size of the following array. This value must be such that in_start+in_count<=face_count for the setting to succeed.
in_rgb_colors	The RGB colors to set on the faces for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetFaceRGBColorsByRange() [2/3]

ShellKey& HPS::ShellKey::SetFaceRGBColorsByRange	(	size_t	in_start,
		RGBColorArray const &	in_rgb_colors
	)

Sets face RGB colors on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting colors. This value must be such that in_start<face_count for setting to succeed.
in_rgb_colors	The RGB colors to set on the faces for this ShellKey. The size of the array must be such that in_start+in_rgb_colors.size()<=face_count for the setting to succeed.

Returns: A reference to this ShellKey.

◆ SetFaceRGBColorsByRange() [3/3]

ShellKey& HPS::ShellKey::SetFaceRGBColorsByRange	(	size_t	in_start,
		size_t	in_count,
		RGBColor const &	in_rgb_color
	)

Sets a single RGB color on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting the color. This value must be such that in_start<face_count for setting to succeed.
in_count	The number of faces on which to set the color. This value must be such that in_start+in_count<=face_count for the setting to succeed.
in_rgb_color	The RGB color to set on the faces for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetFaceVisibilitiesByList() [1/4]

ShellKey& HPS::ShellKey::SetFaceVisibilitiesByList	(	size_t	in_count,
		size_t const	in_faces[],
		bool const	in_visibilities[]
	)

Sets face visibilities on a selection of arbitrary faces.

Parameters

in_count	Size of the following arrays.
in_faces	The indices of the faces on which to set the visibilities. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_visibilities	The visibilities to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceVisibilitiesByList() [2/4]

ShellKey& HPS::ShellKey::SetFaceVisibilitiesByList	(	SizeTArray const &	in_faces,
		BoolArray const &	in_visibilities
	)

Sets face visibilities on a selection of arbitrary faces. If the sizes of the face index and visibility arrays are different, the smaller size will be used.

Parameters

in_faces	The indices of the faces on which to set the visibilities. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_visibilities	The visibilities to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceVisibilitiesByList() [3/4]

ShellKey& HPS::ShellKey::SetFaceVisibilitiesByList	(	size_t	in_count,
		size_t const	in_faces[],
		bool	in_visibility
	)

Sets a single visibility on a selection of arbitrary faces.

Parameters

in_count	Size of the following array.
in_faces	The indices of the faces on which to set the visibility. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_visibility	The visibility to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceVisibilitiesByList() [4/4]

ShellKey& HPS::ShellKey::SetFaceVisibilitiesByList	(	SizeTArray const &	in_faces,
		bool	in_visibility
	)

Sets a single visibility on a selection of arbitrary faces.

Parameters

in_faces	The indices of the faces on which to set the visibility. Each index in the array must be such that in_faces[i]<face_count for setting to succeed.
in_visibility	The visibility to set on the faces.

Returns: A reference to this ShellKey.

◆ SetFaceVisibilitiesByRange() [1/3]

ShellKey& HPS::ShellKey::SetFaceVisibilitiesByRange	(	size_t	in_start,
		size_t	in_count,
		bool const	in_visibilities[]
	)

Sets face visibilities on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting visibilities. This value must be such that in_start<face_count for setting to succeed.
in_count	Size of the following array. This value must be such that in_start+in_count<=face_count for the setting to succeed.
in_visibilities	The visibilities to set on the faces for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetFaceVisibilitiesByRange() [2/3]

ShellKey& HPS::ShellKey::SetFaceVisibilitiesByRange	(	size_t	in_start,
		BoolArray const &	in_visibilities
	)

Sets face visibilities on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting visibilities. This value must be such that in_start<face_count for setting to succeed.
in_visibilities	The visibilities to set on the faces for this ShellKey. The size of the array must be such that in_start+in_visibilities.size()<=face_count for the setting to succeed.

Returns: A reference to this ShellKey.

◆ SetFaceVisibilitiesByRange() [3/3]

ShellKey& HPS::ShellKey::SetFaceVisibilitiesByRange	(	size_t	in_start,
		size_t	in_count,
		bool	in_visibility
	)

Sets a single visibility on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start setting the visibility. This value must be such that in_start<face_count for setting to succeed.
in_count	The number of faces on which to set the visibility. This value must be such that in_start+in_count<=face_count for the setting to succeed.
in_visibility	The visibility to set on the faces for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetMaterialMapping()

ShellKey& HPS::ShellKey::SetMaterialMapping ( MaterialMappingKit const & in_kit )

Sets the specified material mappings on this ShellKey. Only face, back face, cut edge, cut face, edge, and vertex materials will be set on the shell. These material settings will be "global" for the shell, i.e., all types will get the material for that type. To get different materials for the same types, e.g., faces with different colors, it is necessary to use the per-vertex or per-face functions.

Parameters

in_kit The material mappings to set on this ShellKey.

Returns: A reference to this ShellKey.

◆ SetPoints() [1/2]

ShellKey& HPS::ShellKey::SetPoints ( PointArray const & in_points )

Replace the points on this ShellKey with the specified points.

Parameters

in_points The points to use to replace those for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetPoints() [2/2]

ShellKey& HPS::ShellKey::SetPoints	(	size_t	in_count,
		Point const	in_points[]
	)

Replace the points on this ShellKey with the specified points.

Parameters

in_count	Size of the following array.
in_points	The points to use to replace those for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetTristrips() [1/2]

ShellKey& HPS::ShellKey::SetTristrips ( IntArray const & in_tristrips )

Replace the face list on this ShellKey with the specified face list.

Parameters

in_tristrips The tristrips list to use to replace the one for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetTristrips() [2/2]

ShellKey& HPS::ShellKey::SetTristrips	(	size_t	in_count,
		int const	in_tristrips[]
	)

Replace the face list on this ShellKey with the specified face list.

Parameters

in_count	Size of the following array.
in_tristrips	The tristrips list to use to replace the one for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetVertexIndexColorsByList() [1/4]

ShellKey& HPS::ShellKey::SetVertexIndexColorsByList	(	size_t	in_count,
		size_t const	in_vertices[],
		float const	in_indices[],
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex material indices on a selection of arbitrary vertices which apply to the specified shell component.

Parameters

in_count	Size of the following arrays.
in_vertices	The indices of the vertices on which to set the colors.
in_indices	The material indices to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexIndexColorsByList() [2/4]

ShellKey& HPS::ShellKey::SetVertexIndexColorsByList	(	SizeTArray const &	in_vertices,
		FloatArray const &	in_indices,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex material indices on a selection of arbitrary vertices which apply to the specified shell component. If the sizes of the vertex index and material index arrays are different, the smaller size will be used.

Parameters

in_vertices	The indices of the vertices on which to set the colors. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_indices	The material indices to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexIndexColorsByList() [3/4]

ShellKey& HPS::ShellKey::SetVertexIndexColorsByList	(	size_t	in_count,
		size_t const	in_vertices[],
		float	in_index,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets a single material index on a selection of arbitrary vertices which apply to the specified shell component.

Parameters

in_count	Size of the following array.
in_vertices	The indices of the vertices on which to set the color. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_index	The material index to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexIndexColorsByList() [4/4]

ShellKey& HPS::ShellKey::SetVertexIndexColorsByList	(	SizeTArray const &	in_vertices,
		float	in_index,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets a single material index on a selection of arbitrary vertices which apply to the specified shell component.

Parameters

in_vertices	The indices of the vertices on which to set the color. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_index	The material index to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexIndexColorsByRange() [1/3]

ShellKey& HPS::ShellKey::SetVertexIndexColorsByRange	(	size_t	in_start,
		size_t	in_count,
		float const	in_indices[],
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex material indices on a range of vertices starting at the specified offset which apply to the specified shell component.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting colors. This value must be such that in_start<point_count for setting to succeed.
in_count	Size of the following array. This value must be such that in_start+in_count<=point_count for the setting to succeed.
in_indices	The material indices to set on the vertices for this ShellKey.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexIndexColorsByRange() [2/3]

ShellKey& HPS::ShellKey::SetVertexIndexColorsByRange	(	size_t	in_start,
		FloatArray const &	in_indices,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex material indices on a range of vertices starting at the specified offset which apply to the specified shell component.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting colors. This value must be such that in_start<point_count for setting to succeed.
in_indices	The material indices to set on the vertices for this ShellKey. The size of the array must be such that in_start+in_indices.size()<=point_count for the setting to succeed.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexIndexColorsByRange() [3/3]

ShellKey& HPS::ShellKey::SetVertexIndexColorsByRange	(	size_t	in_start,
		size_t	in_count,
		float	in_index,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets a single material index on a range of vertices starting at the specified offset which apply to the specified shell component.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting the color. This value must be such that in_start<point_count for setting to succeed.
in_count	The number of vertices on which to set the color. This value must be such that in_start+in_count<=point_count for the setting to succeed.
in_index	The material index to set on the vertices for this ShellKey.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexNormalsByList() [1/4]

ShellKey& HPS::ShellKey::SetVertexNormalsByList	(	size_t	in_count,
		size_t const	in_vertices[],
		Vector const	in_normals[]
	)

Sets vertex normals on a selection of arbitrary vertices.

Parameters

in_count	Size of the following arrays.
in_vertices	The indices of the vertices on which to set the normals. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_normals	The normals to set on the vertices.

Returns: A reference to this ShellKey.

◆ SetVertexNormalsByList() [2/4]

ShellKey& HPS::ShellKey::SetVertexNormalsByList	(	SizeTArray const &	in_vertices,
		VectorArray const &	in_normals
	)

Sets vertex normals on a selection of arbitrary vertices. If the sizes of the vertex index and normal arrays are different, the smaller size will be used.

Parameters

in_vertices	The indices of the vertices on which to set the normals. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_normals	The normals to set on the vertices.

Returns: A reference to this ShellKey.

◆ SetVertexNormalsByList() [3/4]

ShellKey& HPS::ShellKey::SetVertexNormalsByList	(	size_t	in_count,
		size_t const	in_vertices[],
		Vector const &	in_normal
	)

Sets a single normal on a selection of arbitrary vertices.

Parameters

in_count	Size of the following array.
in_vertices	The indices of the vertices on which to set the normal. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_normal	The normal to set on the vertices.

Returns: A reference to this ShellKey.

◆ SetVertexNormalsByList() [4/4]

ShellKey& HPS::ShellKey::SetVertexNormalsByList	(	SizeTArray const &	in_vertices,
		Vector const &	in_normal
	)

Sets a single normal on a selection of arbitrary vertices.

Parameters

in_vertices	The indices of the vertices on which to set the normal. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_normal	The normal to set on the vertices.

Returns: A reference to this ShellKey.

◆ SetVertexNormalsByRange() [1/3]

ShellKey& HPS::ShellKey::SetVertexNormalsByRange	(	size_t	in_start,
		size_t	in_count,
		Vector const	in_normals[]
	)

Sets vertex normals on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting normals. This value must be such that in_start<point_count for setting to succeed.
in_count	Size of the following array. This value must be such that in_start+in_count<=point_count for the setting to succeed.
in_normals	The normals to set on the vertices for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetVertexNormalsByRange() [2/3]

ShellKey& HPS::ShellKey::SetVertexNormalsByRange	(	size_t	in_start,
		VectorArray const &	in_normals
	)

Sets vertex normals on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting normals. This value must be such that in_start<point_count for setting to succeed.
in_normals	The normals to set on the vertices for this ShellKey. The size of the array must be such that in_start+in_normals.size()<=point_count for the setting to succeed.

Returns: A reference to this ShellKey.

◆ SetVertexNormalsByRange() [3/3]

ShellKey& HPS::ShellKey::SetVertexNormalsByRange	(	size_t	in_start,
		size_t	in_count,
		Vector const &	in_normal
	)

Sets a single normal on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting the normal. This value must be such that in_start<point_count for setting to succeed.
in_count	The number of vertices on which to set the normal. This value must be such that in_start+in_count<=point_count for the setting to succeed.
in_normal	The normal to set on the vertices for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetVertexParametersByList() [1/2]

ShellKey& HPS::ShellKey::SetVertexParametersByList	(	size_t	in_vertex_count,
		size_t const	in_vertices[],
		size_t	in_param_count,
		float const	in_params[],
		size_t	in_param_width = `2`
	)

Sets texture parameters on a selection of arbitrary vertices. If the sizes of the vertex index array and the texture paramter array (divided by the parameter width) are different, the smaller size will be used.

Parameters

in_vertex_count	Size of the following array.
in_vertices	The indices of the vertices on which to set the texture parameters. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_param_count	Size of the following array. This should be divisible by the parameter width, if it is not, some parameters will get ignored.
in_params	The texture parameters to set on the vertices for this ShellKey.
in_param_width	The number of texture parameters per vertex. Defaults to 2.

Returns: A reference to this ShellKey.

◆ SetVertexParametersByList() [2/2]

ShellKey& HPS::ShellKey::SetVertexParametersByList	(	SizeTArray const &	in_vertices,
		FloatArray const &	in_params,
		size_t	in_param_width = `2`
	)

Sets texture parameters on a selection of arbitrary vertices. If the sizes of the vertex index array and the texture paramter array (divided by the parameter width) are different, the smaller size will be used.

Parameters

in_vertices	The indices of the vertices on which to set the texture parameters. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_params	The texture parameters to set on the vertices for this ShellKey. The size of the array should be divisible by the parameter width, if it is not, some parameters will get ignored.
in_param_width	The number of texture parameters per vertex. Defaults to 2.

Returns: A reference to this ShellKey.

◆ SetVertexParametersByRange() [1/2]

ShellKey& HPS::ShellKey::SetVertexParametersByRange	(	size_t	in_start,
		size_t	in_param_count,
		float const	in_params[],
		size_t	in_param_width = `2`
	)

Sets texture parameters on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting texture parameters. This value must be such that in_start<point_count for setting to succeed.
in_param_count	Size of the following array. This should be divisible by the parameter width, if it is not, some parameters will get ignored. This value must be such that in_start+in_param_count/in_param_width<=point_count for the setting to succeed.
in_params	The texture parameters to set on the vertices for this ShellKey.
in_param_width	The number of texture parameters per vertex. Defaults to 2.

Returns: A reference to this ShellKey.

◆ SetVertexParametersByRange() [2/2]

ShellKey& HPS::ShellKey::SetVertexParametersByRange	(	size_t	in_start,
		FloatArray const &	in_params,
		size_t	in_param_width = `2`
	)

Sets texture parameters on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting texture parameters. This value must be such that in_start<point_count for setting to succeed.
in_params	The texture parameters to set on the vertices for this ShellKey. The size of the array should be divisible by the parameter width, if it is not, some parameters will get ignored. The size of the array must be such that in_start+in_params.size()/in_param_width<=point_count for the setting to succeed.
in_param_width	The number of texture parameters per vertex. Defaults to 2.

Returns: A reference to this ShellKey.

◆ SetVertexRGBAColorsByList() [1/4]

ShellKey& HPS::ShellKey::SetVertexRGBAColorsByList	(	size_t	in_count,
		size_t const	in_vertices[],
		RGBAColor const	in_rgba_colors[],
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex RGBA colors on a selection of arbitrary vertices which apply to the specified shell component.

Parameters

in_count	Size of the following arrays.
in_vertices	The indices of the vertices on which to set the colors. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgba_colors	The RGBA colors to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBAColorsByList() [2/4]

ShellKey& HPS::ShellKey::SetVertexRGBAColorsByList	(	SizeTArray const &	in_vertices,
		RGBAColorArray const &	in_rgba_colors,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex RGBA colors on a selection of arbitrary vertices which apply to the specified shell component. If the sizes of the vertex index array and color array are different, the smaller size will be used.

Parameters

in_vertices	The indices of the vertices on which to set the colors. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgba_colors	The RGBA colors to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBAColorsByList() [3/4]

ShellKey& HPS::ShellKey::SetVertexRGBAColorsByList	(	size_t	in_count,
		size_t const	in_vertices[],
		RGBAColor const &	in_rgba_color,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets a single RGBA color on a selection of arbitrary vertices which apply to the specified shell component.

Parameters

in_count	Size of the following array.
in_vertices	The indices of the vertices on which to set the color. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgba_color	The RGBA color to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBAColorsByList() [4/4]

ShellKey& HPS::ShellKey::SetVertexRGBAColorsByList	(	SizeTArray const &	in_vertices,
		RGBAColor const &	in_rgba_color,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets a single RGBA color on a selection of arbitrary vertices which apply to the specified shell component.

Parameters

in_vertices	The indices of the vertices on which to set the color. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgba_color	The RGBA color to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBAColorsByRange() [1/3]

ShellKey& HPS::ShellKey::SetVertexRGBAColorsByRange	(	size_t	in_start,
		size_t	in_count,
		RGBAColor const	in_rgba_colors[],
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex RGBA colors on a range of vertices starting at the specified offset which apply to the specified shell component.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting colors. This value must be such that in_start<point_count for setting to succeed.
in_count	Size of the following array. This value must be such that in_start+in_count<=point_count for the setting to succeed.
in_rgba_colors	The RGBA colors to set on the vertices for this ShellKey.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBAColorsByRange() [2/3]

ShellKey& HPS::ShellKey::SetVertexRGBAColorsByRange	(	size_t	in_start,
		RGBAColorArray const &	in_rgba_colors,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex RGBA colors on a range of vertices starting at the specified offset which apply to the specified shell component.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting colors. This value must be such that in_start<point_count for setting to succeed.
in_rgba_colors	The RGBA colors to set on the vertices for this ShellKey. The size of the array must be such that in_start+in_rgba_colors.size()<=point_count for the setting to succeed.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBAColorsByRange() [3/3]

ShellKey& HPS::ShellKey::SetVertexRGBAColorsByRange	(	size_t	in_start,
		size_t	in_count,
		RGBAColor const &	in_rgba_color,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets a single RGBA color on a range of vertices starting at the specified offset which apply to the specified shell component.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting the color. This value must be such that in_start<point_count for setting to succeed.
in_count	The number of vertices on which to set the color. This value must be such that in_start+in_count<=point_count for the setting to succeed.
in_rgba_color	The RGBA color to set on the vertices for this ShellKey.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBColorsByList() [1/4]

ShellKey& HPS::ShellKey::SetVertexRGBColorsByList	(	size_t	in_count,
		size_t const	in_vertices[],
		RGBColor const	in_rgb_colors[],
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex RGB colors on a selection of arbitrary vertices which apply to the specified shell component.

Parameters

in_count	Size of the following arrays.
in_vertices	The indices of the vertices on which to set the colors. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgb_colors	The RGB colors to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBColorsByList() [2/4]

ShellKey& HPS::ShellKey::SetVertexRGBColorsByList	(	SizeTArray const &	in_vertices,
		RGBColorArray const &	in_rgb_colors,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex RGB colors on a selection of arbitrary vertices which apply to the specified shell component. If the sizes of the vertex index array and the color array different, the smaller size will be used.

Parameters

in_vertices	The indices of the vertices on which to set the colors. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgb_colors	The RGB colors to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBColorsByList() [3/4]

ShellKey& HPS::ShellKey::SetVertexRGBColorsByList	(	size_t	in_count,
		size_t const	in_vertices[],
		RGBColor const &	in_rgb_color,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets a single RGB color on a selection of arbitrary vertices which apply to the specified shell component.

Parameters

in_count	Size of the following array.
in_vertices	The indices of the vertices on which to set the color. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgb_color	The RGB color to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBColorsByList() [4/4]

ShellKey& HPS::ShellKey::SetVertexRGBColorsByList	(	SizeTArray const &	in_vertices,
		RGBColor const &	in_rgb_color,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets a single RGB color on a selection of arbitrary vertices which apply to the specified shell component.

Parameters

in_vertices	The indices of the vertices on which to set the color. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_rgb_color	The RGB color to set on the vertices.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBColorsByRange() [1/3]

ShellKey& HPS::ShellKey::SetVertexRGBColorsByRange	(	size_t	in_start,
		size_t	in_count,
		RGBColor const	in_rgb_colors[],
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex RGB colors on a range of vertices starting at the specified offset which apply to the specified shell component.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting colors. This value must be such that in_start<point_count for setting to succeed.
in_count	Size of the following array. This value must be such that in_start+in_count<=point_count for the setting to succeed.
in_rgb_colors	The RGB colors to set on the vertices for this ShellKey.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBColorsByRange() [2/3]

ShellKey& HPS::ShellKey::SetVertexRGBColorsByRange	(	size_t	in_start,
		RGBColorArray const &	in_rgb_colors,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets vertex RGB colors on a range of vertices starting at the specified offset which apply to the specified shell component.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting colors. This value must be such that in_start<point_count for setting to succeed.
in_rgb_colors	The RGB colors to set on the vertices for this ShellKey. The size of the array must be such that in_start+in_rgb_colors.size()<=point_count for the setting to succeed.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexRGBColorsByRange() [3/3]

ShellKey& HPS::ShellKey::SetVertexRGBColorsByRange	(	size_t	in_start,
		size_t	in_count,
		RGBColor const &	in_rgb_color,
		Shell::Component	in_apply_to = `Shell::Component::Faces`
	)

Sets a single RGB color on a range of vertices starting at the specified offset which apply to the specified shell component.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting the color. This value must be such that in_start<point_count for setting to succeed.
in_count	The number of vertices on which to set the color. This value must be such that in_start+in_count<=point_count for the setting to succeed.
in_rgb_color	The RGB color to set on the vertices for this ShellKey.
in_apply_to	The shell component the colors should apply to. Defaults to Shell::Component::Faces.

Returns: A reference to this ShellKey.

◆ SetVertexVisibilitiesByList() [1/4]

ShellKey& HPS::ShellKey::SetVertexVisibilitiesByList	(	size_t	in_count,
		size_t const	in_vertices[],
		bool const	in_visibilities[]
	)

Sets vertex visibilities on a selection of arbitrary vertices.

Parameters

in_count	Size of the following arrays.
in_vertices	The indices of the vertices on which to set the visibilities. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_visibilities	The visibilities to set on the vertices.

Returns: A reference to this ShellKey.

◆ SetVertexVisibilitiesByList() [2/4]

ShellKey& HPS::ShellKey::SetVertexVisibilitiesByList	(	SizeTArray const &	in_vertices,
		BoolArray const &	in_visibilities
	)

Sets vertex visibilities on a selection of arbitrary vertices. If the sizes of the vertex index and visibility arrays are different, the smaller size will be used.

Parameters

in_vertices	The indices of the vertices on which to set the visibilities. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_visibilities	The visibilities to set on the vertices.

Returns: A reference to this ShellKey.

◆ SetVertexVisibilitiesByList() [3/4]

ShellKey& HPS::ShellKey::SetVertexVisibilitiesByList	(	size_t	in_count,
		size_t const	in_vertices[],
		bool	in_visibility
	)

Sets a single visibility on a selection of arbitrary vertices.

Parameters

in_count	Size of the following array.
in_vertices	The indices of the vertices on which to set the visibility. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_visibility	The visibility to set on the vertices.

Returns: A reference to this ShellKey.

◆ SetVertexVisibilitiesByList() [4/4]

ShellKey& HPS::ShellKey::SetVertexVisibilitiesByList	(	SizeTArray const &	in_vertices,
		bool	in_visibility
	)

Sets a single visibility on a selection of arbitrary vertices.

Parameters

in_vertices	The indices of the vertices on which to set the visibility. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_visibility	The visibility to set on the vertices.

Returns: A reference to this ShellKey.

◆ SetVertexVisibilitiesByRange() [1/3]

ShellKey& HPS::ShellKey::SetVertexVisibilitiesByRange	(	size_t	in_start,
		size_t	in_count,
		bool const	in_visibilities[]
	)

Sets vertex visibilities on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting visibilities. This value must be such that in_start<point_count for setting to succeed.
in_count	Size of the following array. This value must be such that in_start+in_count<=point_count for the setting to succeed.
in_visibilities	The visibilities to set on the vertices for this ShellKey.

Returns: A reference to this ShellKey.

◆ SetVertexVisibilitiesByRange() [2/3]

ShellKey& HPS::ShellKey::SetVertexVisibilitiesByRange	(	size_t	in_start,
		BoolArray const &	in_visibilities
	)

Sets vertex visibilities on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting visibilities. This value must be such that in_start<point_count for setting to succeed.
in_visibilities	The visibilities to set on the vertices for this ShellKey. The size of the array must be such that in_start+in_visibilities.size()<=point_count for the setting to succeed.

Returns: A reference to this ShellKey.

◆ SetVertexVisibilitiesByRange() [3/3]

ShellKey& HPS::ShellKey::SetVertexVisibilitiesByRange	(	size_t	in_start,
		size_t	in_count,
		bool	in_visibility
	)

Sets a single visibility on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start setting the visibility. This value must be such that in_start<point_count for setting to succeed.
in_count	The number of vertices on which to set the visibility. This value must be such that in_start+in_count<=point_count for the setting to succeed.
in_visibility	The visibility to set on the vertices for this ShellKey.

Returns: A reference to this ShellKey.

◆ Show()

void HPS::ShellKey::Show ( ShellKit & out_kit ) const

Copy the contents of this ShellKey into the specified kit.

Parameters

out_kit The kit to populate with the contents of this ShellKey.

◆ ShowEdgeColors()

bool HPS::ShellKey::ShowEdgeColors	(	SizeTArray &	out_vertices1,
		SizeTArray &	out_vertices2,
		HPS::MaterialTypeArray &	out_types,
		HPS::RGBColorArray &	out_rgb_colors,
		HPS::FloatArray &	out_indices
	)

Sets edge colors on a selection of arbitrary edges.

Parameters

out_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed.
out_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed.
out_types	The types of edge colors for each edge.
out_rgb_colors	The colors that have been set on each edge. A given element of this array is valid only if the equivalent element of out_types is RGBColor.
out_indices	The colors that have been set on each edge. A given element of this array is valid only if the equivalent element of out_types is MaterialIndex.

Returns: A reference to this ShellKey.

◆ ShowEdgeColorsByList()

bool HPS::ShellKey::ShowEdgeColorsByList	(	SizeTArray const &	in_vertices1,
		SizeTArray const &	in_vertices2,
		HPS::MaterialTypeArray &	out_types,
		HPS::RGBColorArray &	out_rgb_colors,
		HPS::FloatArray &	out_indices
	)

Sets edge colors on a selection of arbitrary edges.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
out_types	The types of edge colors for each edge.
out_rgb_colors	The colors that have been set on each edge. A given element of this array is valid only if the equivalent element of out_types is Material::Type::RGBColor.
out_indices	The colors that have been set on each edge. A given element of this array is valid only if the equivalent element of out_types is Material::Type::MaterialIndex.

Returns: A reference to this ShellKey.

◆ ShowEdgeVisibilitiesByList()

bool HPS::ShellKey::ShowEdgeVisibilitiesByList	(	SizeTArray const &	in_vertices1,
		SizeTArray const &	in_vertices2,
		BoolArray &	out_validities,
		BoolArray &	out_visibilities
	)		const

Shows all the edge visibilities on this ShellKey.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being shown. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being shown. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
out_validities	The validities of the visibilities for each edge. If an edge has a visibility set on it, the entry in this array will be true, otherwise it will be false.
out_visibilities	The edge visibilities for each edge. out_visibilities[i] is only valid if out_validities[i] is true.

Returns: true if any vertex had a vertex visibility set, false otherwise.

◆ ShowFaceColors()

bool HPS::ShellKey::ShowFaceColors	(	MaterialTypeArray &	out_types,
		RGBColorArray &	out_rgb_colors,
		FloatArray &	out_indices
	)		const

Shows the face colors on ShellKey.

Parameters

out_types	The types of face colors for each face. If a face does not have a face color set, the entry in this array will be Material::Type::None.
out_rgb_colors	The RGB colors for each face. out_rgb_colors[i] is only valid if out_types[i] is Material::Type::RGBColor.
out_indices	The material indices for each face. The out_indices[i] is only valid if out_types[i] is Material::Type::MaterialIndex.

Returns: true if any face had a face color set, false otherwise.

◆ ShowFaceColorsByList()

bool HPS::ShellKey::ShowFaceColorsByList	(	SizeTArray const &	in_faces,
		MaterialTypeArray &	out_types,
		RGBColorArray &	out_rgb_colors,
		FloatArray &	out_indices
	)		const

Shows the face colors on a selection of arbitrary faces. The order of the values in the ouput arrays is the same as the input face index array, i.e., the values of out_types[i], out_rgb_colors[i], and out_indices[i], correspond to the face at index in_faces[i].

Parameters

in_faces	The indices of the faces on which to show the colors. Each index in the array must be such that in_faces[i]<face_count for showing to succeed.
out_types	The types of face colors for each face at the specified index. If a face at a specified index does not have a face color set, the entry in this array will be Material::Type::None.
out_rgb_colors	The RGB colors for each face at the specified index. out_rgb_colors[i] is only valid if out_types[i] is Material::Type::RGBColor.
out_indices	The material indices for each face at the specified index. The out_indices[i] is only valid if out_types[i] is Material::Type::MaterialIndex.

Returns: true if any specified face had a face color set, false otherwise.

◆ ShowFaceColorsByRange()

bool HPS::ShellKey::ShowFaceColorsByRange	(	size_t	in_start,
		size_t	in_count,
		MaterialTypeArray &	out_types,
		RGBColorArray &	out_rgb_colors,
		FloatArray &	out_indices
	)		const

Shows the face colors on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start showing colors. This value must be such that in_start<face_count for showing to succeed.
in_count	The number of colors to show. This value must be such that in_start+in_count<=face_count for the showing to succeed.
out_types	The types of face colors for each face in the specified range. If a face in the specified range does not have a face color set, the entry in this array will be Material::Type::None.
out_rgb_colors	The RGB colors for each face in the specified range. out_rgb_colors[i] is only valid if out_types[i] is Material::Type::RGBColor.
out_indices	The material indices for each face in the specified range. The out_indices[i] is only valid if out_types[i] is Material::Type::MaterialIndex.

Returns: true if any face in the specified range had a face color set, false otherwise.

◆ ShowFacelist()

bool HPS::ShellKey::ShowFacelist ( IntArray & out_facelist ) const

Show the face list for this ShellKey.

Parameters

out_facelist The face list for this ShellKey.

Returns: true if face list was set, false otherwise.

◆ ShowFaceNormals()

bool HPS::ShellKey::ShowFaceNormals	(	BoolArray &	out_validities,
		VectorArray &	out_normals
	)		const

Shows all the face normals for this ShellKey.

Parameters

out_validities	The validities of the normals for each face. If a face had a normal set on it, the entry in this array will be true, otherwise it will be false.
out_normals	The face normals for each face. out_normals[i] is only valid if out_validities[i] is true.

Returns: true if any face had a face normal set, false otherwise.

◆ ShowFaceNormalsByList()

bool HPS::ShellKey::ShowFaceNormalsByList	(	SizeTArray const &	in_faces,
		BoolArray &	out_validities,
		VectorArray &	out_normals
	)		const

Shows the face normals on a selection of arbitrary faces. The order of the values in the output arrays is the same as the input face index array, i.e., the values of out_validities[i] and out_normals[i] correspond to the face at index in_faces[i].

Parameters

in_faces	The indices of the faces on which to show the normals. Each index in the array must be such that in_faces[i]<face_count for showing to succeed.
out_validities	The validities of the normals for each face at the specified index. If a face at a specified index had a normal set on it, the entry in this array will be true, otherwise it will be false.
out_normals	The face normals for each face at the specified index. out_normals[i] is only valid if out_validities[i] is true.

Returns: true if any specified face had a face normal set, false otherwise.

◆ ShowFaceNormalsByRange()

bool HPS::ShellKey::ShowFaceNormalsByRange	(	size_t	in_start,
		size_t	in_count,
		BoolArray &	out_validities,
		VectorArray &	out_normals
	)		const

Shows the face normals on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start showing normals. This value must be such that in_start<face_count for showing to succeed.
in_count	The number of normals to show. This value must be such that in_start+in_count<=face_count for the showing to succeed.
out_validities	The validities of the normals for each face in the specified range. If a face in the specified range had a normal set on it, the entry in this array will be true, otherwise it will be false.
out_normals	The face normals for each face in the specified range. out_normals[i] is only valid if out_validities[i] is true.

Returns: true if any face in the specified range had a face normal set, false otherwise.

◆ ShowFaceVisibilities()

bool HPS::ShellKey::ShowFaceVisibilities	(	BoolArray &	out_validities,
		BoolArray &	out_visibilities
	)		const

Shows all the face visibilities on this ShellKey.

Parameters

out_validities	The validities of the visibilities for each face. If a face had a visibility set on it, the entry in this array will be true, otherwise it will be false.
out_visibilities	The face visibilities for each face. out_visibilities[i] is only valid if out_validities[i] is true.

Returns: true if any face had a face visibility set, false otherwise.

◆ ShowFaceVisibilitiesByList()

bool HPS::ShellKey::ShowFaceVisibilitiesByList	(	SizeTArray const &	in_faces,
		BoolArray &	out_validities,
		BoolArray &	out_visibilities
	)		const

Shows the face visibilities on a selection of arbitrary faces. The order of the values in the output arrays is the same as the input face index array, i.e., the values of out_validities[i] and out_visibilities[i] correspond to the face at index in_faces[i].

Parameters

in_faces	The indices of the faces on which to show the normals. Each index in the array must be such that in_faces[i]<face_count for showing to succeed.
out_validities	The validities of the normals for each face at the specified index. If a face at a specified index had a visibility set on it, the entry in this array will be true, otherwise it will be false.
out_visibilities	The face visibilities for each face at the specified index. out_visibilities[i] is only valid if out_validities[i] is true.

Returns: true if any specified face had a face visibility set, false otherwise.

◆ ShowFaceVisibilitiesByRange()

bool HPS::ShellKey::ShowFaceVisibilitiesByRange	(	size_t	in_start,
		size_t	in_count,
		BoolArray &	out_validities,
		BoolArray &	out_visibilities
	)		const

Shows the face visibilities on a range of faces starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start showing visibilities. This value must be such that in_start<face_count for showing to succeed.
in_count	The number of visibilities to show. This value must be such that in_start+in_count<=face_count for the showing to succeed.
out_validities	The validities of the visibilities for each face in the specified range. If a face in the specified range had a visibility set on it, the entry in this array will be true, otherwise it will be false.
out_visibilities	The face visibilities for each face in the specified range. out_visibilities[i] is only valid if out_validities[i] is true.

Returns: true if any face in the specified range had a face visibility set, false otherwise.

◆ ShowMaterialMapping()

bool HPS::ShellKey::ShowMaterialMapping ( MaterialMappingKit & out_kit ) const

Shows the material mappings set on this ShellKey. These are the "global" material settings, not the per-vertex and per-face material settings.

Parameters

out_kit The material mappings set on this ShellKey.

Returns: true if material mappings were set, false otherwise.

◆ ShowNetFaceNormalsByList()

bool HPS::ShellKey::ShowNetFaceNormalsByList	(	SizeTArray const &	in_faces,
		VectorArray &	out_normals
	)		const

Shows the effective face normals on a selection of arbitrary faces. If a normal for a given face is unspecified, this will retrieve the effective normal. The order of the values in the output arrays is the same as the input face index array, i.e., the values of out_validities[i] and out_normals[i] correspond to the face at index in_faces[i].

Parameters

in_faces	The indices of the faces on which to show the normals. Each index in the array must be such that in_faces[i]<face_count for showing to succeed.
out_normals	The face normals for each face at the specified index.

Returns: true if no errors were encountered, false otherwise.

◆ ShowNetFaceNormalsByRange()

bool HPS::ShellKey::ShowNetFaceNormalsByRange	(	size_t	in_start,
		size_t	in_count,
		VectorArray &	out_normals
	)		const

Shows the effective face normals on a range of faces starting at the specified offset. If a normal for a given face is unspecified, this will retrieve the effective normal.

Parameters

in_start	The offset into the faces for this ShellKey at which to start showing normals. This value must be such that in_start<face_count for showing to succeed.
in_count	The number of normals to show. This value must be such that in_start+in_count<=face_count for the showing to succeed.
out_normals	The face normals for each face in the specified range.

Returns: true if no errors were encountered, false otherwise.

◆ ShowNetVertexNormals()

bool HPS::ShellKey::ShowNetVertexNormals	(	VectorArray &	out_normals,
		Drawing::Handedness	in_polygon_handedness = `Drawing::Handedness::None`
	)		const

Shows the all net vertex normals on this ShellKey.

Parameters

out_normals The vertex normals for each vertex.

in_polygon_handedness The polygon handedness to assume when returning normals. Defaults to None. Specifying no handedness when requesting net normals, will return the normals using the handedness used internally by Visualize for this particular shell. When specifying a handedness, only normals which were implicitly calculated by Visualize will be flipped to conform to the requested handedness. User specified normals will be left untouched.

Returns: true if no errors were encountered, false otherwise.

◆ ShowNetVertexNormalsByRange()

bool HPS::ShellKey::ShowNetVertexNormalsByRange	(	size_t	in_start,
		size_t	in_count,
		VectorArray &	out_normals,
		Drawing::Handedness	in_polygon_handedness = `Drawing::Handedness::None`
	)		const

Shows the net vertex normals on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start showing normals. This value must be such that in_start<point_count for showing to succeed.
in_count	The number of normals to show. This value must be such that in_start+in_count<=point_count for the showing to succeed.
out_normals	The vertex normals for each vertex in the specified range.
in_polygon_handedness	The polygon handedness to assume when returning normals. Defaults to None. Specifying no handedness when requesting net normals, will return the normals using the handedness used internally by Visualize for this particular shell. When specifying a handedness, only normals which were implicitly calculated by Visualize will be flipped to conform to the requested handedness. User specified normals will be left untouched.

Returns: true if no errors were encountered, false otherwise.

◆ ShowPoints()

bool HPS::ShellKey::ShowPoints ( PointArray & out_points ) const

Show the points for this ShellKey.

Parameters

out_points The points for this ShellKey.

Returns: true if points were set, false otherwise.

◆ ShowPointsByList() [1/2]

bool HPS::ShellKey::ShowPointsByList	(	SizeTArray const &	in_indices,
		PointArray &	out_points
	)		const

Show a subset of the points for this ShellKey by list.

Parameters

in_indices	The list of point indices to show.
out_points	The requested points for this ShellKey.

Returns: true if all requested points were set, false otherwise.

◆ ShowPointsByList() [2/2]

bool HPS::ShellKey::ShowPointsByList	(	size_t	in_count,
		size_t const	in_indices[],
		PointArray &	out_points
	)		const

Show a subset of the points for this ShellKey by list.

Parameters

in_count	The number of points to show.
in_indices	The list of point indices to show.
out_points	The requested points for this ShellKey.

Returns: true if all requested points were set, false otherwise.

◆ ShowPointsByRange()

bool HPS::ShellKey::ShowPointsByRange	(	size_t	in_start_index,
		size_t	in_count,
		PointArray &	out_points
	)		const

Show a subset of the points for this ShellKey by range.

Parameters

in_start_index	The first point to show.
in_count	The number of points to show.
out_points	The requested points for this ShellKey.

Returns: true if all requested points were set, false otherwise.

◆ ShowTristrips() [1/2]

bool HPS::ShellKey::ShowTristrips ( IntArray & out_tristrips ) const

Show the tristrips list for this ShellKey.

Parameters

out_tristrips The tristrip list for this ShellKey.

Returns: true if tristrips list was set, false otherwise.

◆ ShowTristrips() [2/2]

bool HPS::ShellKey::ShowTristrips	(	IntArray &	out_tristrips,
		IntArray &	out_face_indices
	)		const

Show the tristrips list for this ShellKey.

Parameters

out_tristrips	The tristrip list for this ShellKey.
out_face_indices	The corresponding face indices for each triangle in the tristrip list.

Returns: true if tristrips list was set, false otherwise.

◆ ShowVertexColors()

bool HPS::ShellKey::ShowVertexColors	(	Shell::Component	in_apply_to,
		MaterialTypeArray &	out_types,
		RGBColorArray &	out_rgb_colors,
		RGBAColorArray &	out_rgba_colors,
		FloatArray &	out_indices
	)		const

Shows all the vertex colors on the specified shell component.

Parameters

in_apply_to	The shell component the colors should apply to.
out_types	The types of vertex colors for each vertex. If a vertex does not have a vertex color set for the specified shell component, the entry in this array will be Material::Type::None.
out_rgb_colors	The RGB colors for each vertex. out_rgb_colors[i] is only valid if out_types[i] is Material::Type::RGBColor.
out_rgba_colors	The RGBA colors for each vertex. out_rgba_colors[i] is only valid if out_types[i] is Material::Type::RGBAColor.
out_indices	The material indices for each vertex. The out_indices[i] is only valid if out_types[i] is Material::Type::MaterialIndex.

Returns: true if any vertex colors were shown, false otherwise.

◆ ShowVertexColorsByList()

bool HPS::ShellKey::ShowVertexColorsByList	(	SizeTArray const &	in_vertices,
		Shell::Component	in_apply_to,
		MaterialTypeArray &	out_types,
		RGBColorArray &	out_rgb_colors,
		RGBAColorArray &	out_rgba_colors,
		FloatArray &	out_indices
	)		const

Shows the vertex colors on a selection of arbitrary vertices which apply to the specified shell component. The order of the values in the ouput arrays is the same as the input vertex index array, i.e., the values of out_types[i], out_rgb_colors[i], out_rgba_colors[i], and out_indices[i], correspond to the vertex at index in_vertices[i].

Parameters

in_vertices	The indices of the vertices on which to show the colors. Each index in the array must be such that in_vertices[i]<point_count for showing to succeed.
in_apply_to	The shell component the colors should apply to.
out_types	The types of vertex colors for each vertex at the specified index. If a vertex at a specified index does not have a vertex color set for the specified component, the entry in this array will be Material::Type::None.
out_rgb_colors	The RGB colors for each vertex at the specified index. out_rgb_colors[i] is only valid if out_types[i] is Material::Type::RGBColor.
out_rgba_colors	The RGBA colors for each vertex at the specified index. out_rgba_colors[i] is only valid if out_types[i] is Material::Type::RGBAColor.
out_indices	The material indices for each vertex at the specified index. The out_indices[i] is only valid if out_types[i] is Material::Type::MaterialIndex.

Returns: true if any specified vertex had a vertex color on the specified component set, false otherwise.

◆ ShowVertexColorsByRange()

bool HPS::ShellKey::ShowVertexColorsByRange	(	size_t	in_start,
		size_t	in_count,
		Shell::Component	in_apply_to,
		MaterialTypeArray &	out_types,
		RGBColorArray &	out_rgb_colors,
		RGBAColorArray &	out_rgba_colors,
		FloatArray &	out_indices
	)		const

Shows the vertex colors on a range of vertices starting at the specified offset which apply to the specified shell component.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start showing colors. This value must be such that in_start<point_count for showing to succeed.
in_count	The number of colors to show. This value must be such that in_start+in_count<=point_count for the showing to succeed.
in_apply_to	The shell component the colors should apply to.
out_types	The types of vertex colors for each vertex in the specified range. If a vertex in the specified range does not have a vertex color set for the specified shell component, the entry in this array will be Material::Type::None.
out_rgb_colors	The RGB colors for each vertex in the specified range. out_rgb_colors[i] is only valid if out_types[i] is Material::Type::RGBColor.
out_rgba_colors	The RGBA colors for each vertex in the specified range. out_rgba_colors[i] is only valid if out_types[i] is Material::Type::RGBAColor.
out_indices	The material indices for each vertex in the specified range. The out_indices[i] is only valid if out_types[i] is Material::Type::MaterialIndex.

Returns: true if any vertex in the specified range had a vertex color on the specified component set, false otherwise.

◆ ShowVertexNormals()

bool HPS::ShellKey::ShowVertexNormals	(	BoolArray &	out_validities,
		VectorArray &	out_normals
	)		const

Shows all the vertex normals on this ShellKey.

Parameters

out_validities	The validities of the normals for each vertex. If a vertex had a normal set on it, the entry in this array will be true, otherwise it will be false.
out_normals	The vertex normals for each vertex. out_normals[i] is only valid if out_validities[i] is true.

Returns: true if any vertex normals were shown, false otherwise.

◆ ShowVertexNormalsByList()

bool HPS::ShellKey::ShowVertexNormalsByList	(	SizeTArray const &	in_vertices,
		BoolArray &	out_validities,
		VectorArray &	out_normals
	)		const

Shows the vertex normals on a selection of arbitrary vertices. The order of the values in the output arrays is the same as the input vertex index array, i.e., the values of out_validities[i] and out_normals[i] correspond to the vertex at index in_vertices[i].

Parameters

in_vertices	The indices of the vertices on which to show the normals. Each index in the array must be such that in_vertices[i]<point_count for showing to succeed.
out_validities	The validities of the normals for each vertex at the specified index. If a vertex at a specified index had a normal set on it, the entry in this array will be true, otherwise it will be false.
out_normals	The vertex normals for each vertex at the specified index. out_normals[i] is only valid if out_validities[i] is true.

Returns: true if any specified vertex had a vertex normal set, false otherwise.

◆ ShowVertexNormalsByRange()

bool HPS::ShellKey::ShowVertexNormalsByRange	(	size_t	in_start,
		size_t	in_count,
		BoolArray &	out_validities,
		VectorArray &	out_normals
	)		const

Shows the vertex normals on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start showing normals. This value must be such that in_start<point_count for showing to succeed.
in_count	The number of normals to show. This value must be such that in_start+in_count<=point_count for the showing to succeed.
out_validities	The validities of the normals for each vertex in the specified range. If a vertex in the specified range had a normal set on it, the entry in this array will be true, otherwise it will be false.
out_normals	The vertex normals for each vertex in the specified range. out_normals[i] is only valid if out_validities[i] is true.

Returns: true if any vertex in the specified range had a vertex normal set, false otherwise.

◆ ShowVertexParameters() [1/2]

bool HPS::ShellKey::ShowVertexParameters	(	BoolArray &	out_validities,
		FloatArray &	out_params
	)		const

Shows the texture parameters for all of the vertices on this ShellKey. For this particular show function, the parameter width is returned implicitly and could be determined by out_params.size()/in_count.

Parameters

out_validities	The validities of the texture parameters for each vertex. If a vertex had a texture parameter set on it, the entry in this array will be true, otherwise it will be false.
out_params	The texture parameters for each vertex. (out_params[i],...,out_params[i+param_width-1]) are only valid if out_validities[i] is true.

Returns: true if any vertex had a texture parameter set, false otherwise.

◆ ShowVertexParameters() [2/2]

bool HPS::ShellKey::ShowVertexParameters	(	BoolArray &	out_validities,
		FloatArray &	out_params,
		size_t &	out_param_width
	)		const

Shows the texture parameters for all of the vertices on this ShellKey.

Parameters

out_validities	The validities of the texture parameters for each vertex. If a vertex had a texture parameter set on it, the entry in this array will be true, otherwise it will be false.
out_params	The texture parameters for each vertex. (out_params[i],...,out_params[i+param_width-1]) are only valid if out_validities[i] is true.
out_param_width	The number of texture parameters per vertex.

Returns: true if any vertex had a texture parameter set, false otherwise.

◆ ShowVertexParametersByList() [1/2]

bool HPS::ShellKey::ShowVertexParametersByList	(	SizeTArray const &	in_vertices,
		BoolArray &	out_validities,
		FloatArray &	out_params
	)		const

Shows the texture parameters on a selection of arbitrary vertices. For this particular show function, the parameter width is returned implicitly and could be determined by out_params.size()/in_vertices.size(). The order of the output arrays is the same as the input vertex index array, i.e., out_validities[i] and (out_params[i],...,out_params[i+param_width-1]) correspond to the vertex at index in_vertices[i].

Parameters

in_vertices	The indices of the vertices on which to show the texture parameters. Each index in the array must be such that in_vertices[i]<point_count for showing to succeed.
out_validities	The validities of the texture parameters for each vertex at the specified index. If a vertex at a specified index had a texture parameter set on it, the entry in this array will be true, otherwise it will be false.
out_params	The texture parameters for each vertex at the specified index. (out_params[i],...,out_params[i+param_width-1]) are only valid if out_validities[i] is true.

Returns: true if any specified vertex had a texture parameter set, false otherwise.

◆ ShowVertexParametersByList() [2/2]

bool HPS::ShellKey::ShowVertexParametersByList	(	SizeTArray const &	in_vertices,
		BoolArray &	out_validities,
		FloatArray &	out_params,
		size_t &	out_param_width
	)		const

Shows the texture parameters on a selection of arbitrary vertices. The order of the output arrays is the same as the input vertex index array, i.e., out_validities[i] and (out_params[i],...,out_params[i+param_width-1]) correspond to the vertex at index in_vertices[i].

Parameters

in_vertices	The indices of the vertices on which to show the texture parameters. Each index in the array must be such that in_vertices[i]<point_count for showing to succeed.
out_validities	The validities of the texture parameters for each vertex at the specified index. If a vertex at a specified index had a texture parameter set on it, the entry in this array will be true, otherwise it will be false.
out_params	The texture parameters for each vertex at the specified index. (out_params[i],...,out_params[i+param_width-1]) are only valid if out_validities[i] is true.
out_param_width	The number of texture parameters per vertex.

Returns: true if any specified vertex had a texture parameter set, false otherwise.

◆ ShowVertexParametersByRange() [1/2]

bool HPS::ShellKey::ShowVertexParametersByRange	(	size_t	in_start,
		size_t	in_count,
		BoolArray &	out_validities,
		FloatArray &	out_params
	)		const

Shows the texture parameters on a range of vertices starting at the specified offset. For this particular show function, the parameter width is returned implicitly and could be determined by out_params.size()/in_count.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start showing texture parameters. This value must be such that in_start<point_count for showing to succeed.
in_count	The number of vertices for which to show the texture parameters. This value must be such that in_start+in_count<=point_count for the showing to succeed.
out_validities	The validities of the texture parameters for each vertex in the specified range. If a vertex in the specified range had a texture parameter set on it, the entry in this array will be true, otherwise it will be false.
out_params	The texture parameters for each vertex in the specified range. (out_params[i],...,out_params[i+param_width-1]) are only valid if out_validities[i] is true.

Returns: true if any vertex in the specified range had a texture parameter set, false otherwise.

◆ ShowVertexParametersByRange() [2/2]

bool HPS::ShellKey::ShowVertexParametersByRange	(	size_t	in_start,
		size_t	in_count,
		BoolArray &	out_validities,
		FloatArray &	out_params,
		size_t &	out_param_width
	)		const

Shows the texture parameters on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start showing texture parameters. This value must be such that in_start<point_count for showing to succeed.
in_count	The number of vertices for which to show the texture parameters. This value must be such that in_start+in_count<=point_count for the showing to succeed.
out_validities	The validities of the texture parameters for each vertex in the specified range. If a vertex in the specified range had a texture parameter set on it, the entry in this array will be true, otherwise it will be false.
out_params	The texture parameters for each vertex in the specified range. (out_params[i],...,out_params[i+param_width-1]) are only valid if out_validities[i] is true.
out_param_width	The number of texture parameters per vertex.

Returns: true if any vertex in the specified range had a texture parameter set, false otherwise.

◆ ShowVertexVisibilities()

bool HPS::ShellKey::ShowVertexVisibilities	(	BoolArray &	out_validities,
		BoolArray &	out_visibilities
	)		const

Shows all the vertex visibilities on this ShellKey.

Parameters

out_validities	The validities of the visibilities for each vertex. If a vertex had a visibility set on it, the entry in this array will be true, otherwise it will be false.
out_visibilities	The vertex visibilities for each vertex. out_visibilities[i] is only valid if out_validities[i] is true.

Returns: true if any vertex had a vertex visibility set, false otherwise.

◆ ShowVertexVisibilitiesByList()

bool HPS::ShellKey::ShowVertexVisibilitiesByList	(	SizeTArray const &	in_vertices,
		BoolArray &	out_validities,
		BoolArray &	out_visibilities
	)		const

Shows the vertex visibilities on a selection of arbitrary vertices. The order of the values in the output arrays is the same as the input vertex index array, i.e., the values of out_validities[i] and out_visibilities[i] correspond to the vertex at index in_vertices[i].

Parameters

in_vertices	The indices of the vertices on which to show the normals. Each index in the array must be such that in_vertices[i]<point_count for showing to succeed.
out_validities	The validities of the normals for each vertex at the specified index. If a vertex at a specified index had a visibility set on it, the entry in this array will be true, otherwise it will be false.
out_visibilities	The vertex visibilities for each vertex at the specified index. out_visibilities[i] is only valid if out_validities[i] is true.

Returns: true if any specified vertex had a vertex visibility set, false otherwise.

◆ ShowVertexVisibilitiesByRange()

bool HPS::ShellKey::ShowVertexVisibilitiesByRange	(	size_t	in_start,
		size_t	in_count,
		BoolArray &	out_validities,
		BoolArray &	out_visibilities
	)		const

Shows the vertex visibilities on a range of vertices starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start showing visibilities. This value must be such that in_start<point_count for showing to succeed.
in_count	The number of visibilities to show. This value must be such that in_start+in_count<=point_count for the showing to succeed.
out_validities	The validities of the visibilities for each vertex in the specified range. If a vertex in the specified range had a visibility set on it, the entry in this array will be true, otherwise it will be false.
out_visibilities	The vertex visibilities for each vertex in the specified range. out_visibilities[i] is only valid if out_validities[i] is true.

Returns: true if any vertex in the specified range had a vertex visibility set, false otherwise.

◆ UnsetEdgeColors()

ShellKey& HPS::ShellKey::UnsetEdgeColors ( )

Unsets edge colors on all edges.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
out_types	The types of edge colors for each edge.
out_rgb_colors	The colors that have been set on each edge. A given element of this array is valid only if the equivalent element of out_types is Material::Type::RGBColor.
out_indices	The colors that have been set on each edge. A given element of this array is valid only if the equivalent element of out_types is Material::Type::MaterialIndex.

Returns: A reference to this ShellKey.

◆ UnsetEdgeColorsByList() [1/2]

ShellKey& HPS::ShellKey::UnsetEdgeColorsByList	(	SizeTArray const &	in_vertices1,
		SizeTArray const &	in_vertices2
	)

Unsets edge colors on a selection of arbitrary edges.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.

Returns: A reference to this ShellKey.

◆ UnsetEdgeColorsByList() [2/2]

ShellKey& HPS::ShellKey::UnsetEdgeColorsByList	(	size_t	in_count,
		size_t const	in_vertices1[],
		size_t const	in_vertices2[]
	)

Unsets edge colors on a selection of arbitrary edges.

Parameters

in_count	Size of the following arrays.
in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being changed. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.

Returns: A reference to this ShellKey.

◆ UnsetEdgeEverything()

ShellKey& HPS::ShellKey::UnsetEdgeEverything ( )

Removes all edge settings (edge colors and edge visibilities) from this ShellKey.

Returns: A reference to this ShellKey.

◆ UnsetEdgeVisibilities()

ShellKey& HPS::ShellKey::UnsetEdgeVisibilities ( )

Removes all vertex visibilities.

Returns: A reference to this ShellKey.

◆ UnsetEdgeVisibilitiesByList() [1/2]

ShellKey& HPS::ShellKey::UnsetEdgeVisibilitiesByList	(	SizeTArray const &	in_vertices1,
		SizeTArray const &	in_vertices2
	)

Unsets edge visibilities on a selection of arbitrary edges.

Parameters

in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being unset. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being unset. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.

Returns: A reference to this ShellKey.

◆ UnsetEdgeVisibilitiesByList() [2/2]

ShellKey& HPS::ShellKey::UnsetEdgeVisibilitiesByList	(	size_t	in_count,
		size_t const	in_vertices1[],
		size_t const	in_vertices2[]
	)

Unsets edge visibilities on a selection of arbitrary edges.

Parameters

in_count	Size of the following arrays.
in_vertices1	The vertex indices that correspond to the start position of each edge for which the visibilities are being unset. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.
in_vertices2	The vertex indices that correspond to the end position of each edge for which the visibilities are being unset. Each index in the array must be such that in_vertices[i]<point_count for setting to succeed.

Returns: A reference to this ShellKey.

◆ UnsetEverything()

ShellKey& HPS::ShellKey::UnsetEverything ( )

Removes all settings from this ShellKey.

Returns: A reference to this ShellKey.

◆ UnsetFaceColors()

ShellKey& HPS::ShellKey::UnsetFaceColors ( )

Removes all face colors (RGB colors or material indices).

Returns: A reference to this ShellKey.

◆ UnsetFaceColorsByList() [1/2]

ShellKey& HPS::ShellKey::UnsetFaceColorsByList ( SizeTArray const & in_vertices )

Removes the face colors (RGB colors or material indices) on a selection of arbitrary vertices.

Parameters

in_vertices The indices of the faces on which to remove the colors. Each index in the array must be such that in_faces[i]<face_count for removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetFaceColorsByList() [2/2]

ShellKey& HPS::ShellKey::UnsetFaceColorsByList	(	size_t	in_count,
		size_t const	in_faces[]
	)

Removes the face visibilities on a selection of arbitrary faces.

Parameters

in_count	The number of face visibilities to remove for this ShellKey.
in_faces	The indices of the faces on which to remove the visibilities.

Returns: A reference to this ShellKey.

◆ UnsetFaceColorsByRange()

ShellKey& HPS::ShellKey::UnsetFaceColorsByRange	(	size_t	in_start,
		size_t	in_count
	)

Removes the specified range of face colors (RGB colors or material indices) starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start removing colors. This value must be such that in_start<face_count for removal to succeed.
in_count	The number of face colors to remove for this ShellKey. This value must be such that in_start+in_count<=face_count for the removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetFaceEverything()

ShellKey& HPS::ShellKey::UnsetFaceEverything ( )

Removes all face settings (face colors, face normals, and face visibilities) from this ShellKey.

Returns: A reference to this ShellKey.

◆ UnsetFacelist()

ShellKey& HPS::ShellKey::UnsetFacelist ( )

Removes the face list for this ShellKey.

Returns: A reference to this ShellKey.

◆ UnsetFaceNormals()

ShellKey& HPS::ShellKey::UnsetFaceNormals ( )

Removes all face normals.

Returns: A reference to this ShellKey.

◆ UnsetFaceNormalsByList()

ShellKey& HPS::ShellKey::UnsetFaceNormalsByList ( SizeTArray const & in_vertices )

Removes the face normals on a selection of arbitrary faces.

Parameters

in_faces The indices of the faces on which to remove the normals. Each index in the array must be such that in_faces[i]<face_count for removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetFaceNormalsByRange()

ShellKey& HPS::ShellKey::UnsetFaceNormalsByRange	(	size_t	in_start,
		size_t	in_count
	)

Removes the specified range of face normals starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start removing normals. This value must be such that in_start<face_count for removal to succeed.
in_count	The number of face normals to remove for this ShellKey. This value must be such that in_start+in_count<=face_count for the removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetFaceVisibilities()

ShellKey& HPS::ShellKey::UnsetFaceVisibilities ( )

Removes all face visibilities.

Returns: A reference to this ShellKey.

◆ UnsetFaceVisibilitiesByList() [1/2]

ShellKey& HPS::ShellKey::UnsetFaceVisibilitiesByList	(	size_t	in_count,
		size_t const	in_faces[]
	)

Removes the face visibilities on a selection of arbitrary faces.

Parameters

in_count	The number of face visibilities to remove for this ShellKey.
in_faces	The indices of the faces on which to remove the visibilities.

Returns: A reference to this ShellKey.

◆ UnsetFaceVisibilitiesByList() [2/2]

ShellKey& HPS::ShellKey::UnsetFaceVisibilitiesByList ( SizeTArray const & in_vertices )

Removes the face visibilities on a selection of arbitrary faces.

Parameters

in_faces The indices of the faces on which to remove the visibilities. Each index in the array must be such that in_faces[i]<face_count for removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetFaceVisibilitiesByRange()

ShellKey& HPS::ShellKey::UnsetFaceVisibilitiesByRange	(	size_t	in_start,
		size_t	in_count
	)

Removes the specified range of face visibilities starting at the specified offset.

Parameters

in_start	The offset into the faces for this ShellKey at which to start removing visibilities. This value must be such that in_start<face_count for removal to succeed.
in_count	The number of face visibilities to remove for this ShellKey. This value must be such that in_start+in_count<=face_count for the removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetMaterialMapping()

ShellKey& HPS::ShellKey::UnsetMaterialMapping ( )

Removes all material mappings on this ShellKey. This removes the "global" material settings and does not affect per-vertex or per-face materials.

Returns: A reference to this ShellKey.

◆ UnsetPoints()

ShellKey& HPS::ShellKey::UnsetPoints ( )

Removes the points for this ShellKey.

Returns: A reference to this ShellKey.

◆ UnsetTristrips()

ShellKey& HPS::ShellKey::UnsetTristrips ( )

Removes the tristrips list for this ShellKey.

Returns: A reference to this ShellKey.

◆ UnsetVertexColors() [1/2]

ShellKey& HPS::ShellKey::UnsetVertexColors ( )

Removes all vertex colors (RGB colors, RGBA colors, or material indices) for all shell components.

Returns: A reference to this ShellKey.

◆ UnsetVertexColors() [2/2]

ShellKey& HPS::ShellKey::UnsetVertexColors ( Shell::Component in_apply_to )

Removes all vertex colors (RGB colors, RGBA colors, or material indices) for the specified shell component.

Parameters

in_apply_to The shell component for which to remove the colors.

Returns: A reference to this ShellKey.

◆ UnsetVertexColorsByList() [1/4]

ShellKey& HPS::ShellKey::UnsetVertexColorsByList	(	size_t	in_count,
		size_t const	in_vertices[]
	)

Removes the vertex visibilities on a selection of arbitrary vertices.

Parameters

in_count	The number of vertex visibilities to remove for this ShellKey.
in_faces	The indices of the vertices on which to remove the visibilities.

Returns: A reference to this ShellKey.

◆ UnsetVertexColorsByList() [2/4]

ShellKey& HPS::ShellKey::UnsetVertexColorsByList	(	size_t	in_count,
		size_t const	in_vertices[],
		Shell::Component	in_apply_to
	)

Removes the vertex visibilities on a selection of arbitrary vertices.

Parameters

in_count	The number of vertex visibilities to remove for this ShellKey.
in_faces	The indices of the vertices on which to remove the visibilities.
in_apply_to	The shell component the colors should apply to.

Returns: A reference to this ShellKey.

◆ UnsetVertexColorsByList() [3/4]

ShellKey& HPS::ShellKey::UnsetVertexColorsByList ( SizeTArray const & in_vertices )

Removes the vertex colors (RGB colors, RGBA colors, or material indices) for all shell components on a selection of arbitrary vertices.

Parameters

in_vertices The indices of the vertices on which to remove the colors. Each index in the array must be such that in_vertices[i]<point_count for removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetVertexColorsByList() [4/4]

ShellKey& HPS::ShellKey::UnsetVertexColorsByList	(	SizeTArray const &	in_vertices,
		Shell::Component	in_apply_to
	)

Removes the vertex colors (RGB colors, RGBA colors, or material indices) for the specified shell component on a selection of arbitrary vertices.

Parameters

in_vertices	The indices of the vertices on which to remove the colors. Each index in the array must be such that in_vertices[i]<point_count for removal to succeed.
in_apply_to	The shell component for which to remove the colors.

Returns: A reference to this ShellKey.

◆ UnsetVertexColorsByRange() [1/2]

ShellKey& HPS::ShellKey::UnsetVertexColorsByRange	(	size_t	in_start,
		size_t	in_count
	)

Removes the specified range of vertex colors (RGB colors, RGBA colors, or material indices) for all shell components starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start removing colors. This value must be such that in_start<point_count for removal to succeed.
in_count	The number of vertex colors to remove for this ShellKey. This value must be such that in_start+in_count<=point_count for the removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetVertexColorsByRange() [2/2]

ShellKey& HPS::ShellKey::UnsetVertexColorsByRange	(	size_t	in_start,
		size_t	in_count,
		Shell::Component	in_apply_to
	)

Removes the specified range of vertex colors (RGB colors, RGBA colors, or material indices) for the specified shell component starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start removing colors. This value must be such that in_start<point_count for removal to succeed.
in_count	The number of vertex colors to remove for this ShellKey. This value must be such that in_start+in_count<=point_count for the removal to succeed.
in_apply_to	The shell component for which to remove the colors.

Returns: A reference to this ShellKey.

◆ UnsetVertexEverything()

ShellKey& HPS::ShellKey::UnsetVertexEverything ( )

Removes all vertex settings (vertex colors, vertex normals, texture parameters, and vertex visibilities) from this ShellKey.

Returns: A reference to this ShellKey.

◆ UnsetVertexNormals()

ShellKey& HPS::ShellKey::UnsetVertexNormals ( )

Removes all vertex normals.

Returns: A reference to this ShellKey.

◆ UnsetVertexNormalsByList()

ShellKey& HPS::ShellKey::UnsetVertexNormalsByList ( SizeTArray const & in_vertices )

Removes the vertex normals on a selection of arbitrary vertices.

Parameters

in_vertices The indices of the vertices on which to remove the normals. Each index in the array must be such that in_vertices[i]<point_count for removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetVertexNormalsByRange()

ShellKey& HPS::ShellKey::UnsetVertexNormalsByRange	(	size_t	in_start,
		size_t	in_count
	)

Removes the specified range of vertex normals starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start removing normals. This value must be such that in_start<point_count for removal to succeed.
in_count	The number of vertex normals to remove for this ShellKey. This value must be such that in_start+in_count<=point_count for the removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetVertexParameters()

ShellKey& HPS::ShellKey::UnsetVertexParameters ( )

Removes all texture parameters.

Returns: A reference to this ShellKey.

◆ UnsetVertexParametersByList()

ShellKey& HPS::ShellKey::UnsetVertexParametersByList ( SizeTArray const & in_vertices )

Removes the texture parameters on a selection of arbitrary vertices.

Parameters

in_vertices The indices of the vertices on which to remove the texture parameters. Each index in the array must be such that in_vertices[i]<point_count for removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetVertexParametersByRange()

ShellKey& HPS::ShellKey::UnsetVertexParametersByRange	(	size_t	in_start,
		size_t	in_count
	)

Removes the specified range of texture parameters starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start removing texture parameters. This value must be such that in_start<point_count for removal to succeed.
in_count	The number of texture parameters to remove for this ShellKey. This value must be such that in_start+in_count<=point_count for the removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetVertexVisibilities()

ShellKey& HPS::ShellKey::UnsetVertexVisibilities ( )

Removes all vertex visibilities.

Returns: A reference to this ShellKey.

◆ UnsetVertexVisibilitiesByList() [1/2]

ShellKey& HPS::ShellKey::UnsetVertexVisibilitiesByList	(	size_t	in_count,
		size_t const	in_vertices[]
	)

Removes the vertex visibilities on a selection of arbitrary vertices.

Parameters

in_count	The number of vertex visibilities to remove for this ShellKey.
in_faces	The indices of the vertices on which to remove the visibilities.

Returns: A reference to this ShellKey.

◆ UnsetVertexVisibilitiesByList() [2/2]

ShellKey& HPS::ShellKey::UnsetVertexVisibilitiesByList ( SizeTArray const & in_vertices )

Removes the vertex visibilities on a selection of arbitrary vertices.

Parameters

in_vertices The indices of the vertices on which to remove the visibilities. Each index in the array must be such that in_vertices[i]<point_count for removal to succeed.

Returns: A reference to this ShellKey.

◆ UnsetVertexVisibilitiesByRange()

ShellKey& HPS::ShellKey::UnsetVertexVisibilitiesByRange	(	size_t	in_start,
		size_t	in_count
	)

Removes the specified range of vertex visibilities starting at the specified offset.

Parameters

in_start	The offset into the vertices for this ShellKey at which to start removing visibilities. This value must be such that in_start<point_count for removal to succeed.
in_count	The number of vertex visibilities to remove for this ShellKey. This value must be such that in_start+in_count<=point_count for the removal to succeed.

Returns: A reference to this ShellKey.

The documentation for this class was generated from the following file:

include/hps.h

Public Member Functions

Static Public Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ShellKey() [1/4]

◆ ShellKey() [2/4]

◆ ShellKey() [3/4]

◆ ShellKey() [4/4]

Member Function Documentation

◆ ComputeRelation() [1/3]

◆ ComputeRelation() [2/3]

◆ ComputeRelation() [3/3]

◆ Consume()

◆ EditFacelistByDeletion()

◆ EditFacelistByInsertion() [1/2]

◆ EditFacelistByInsertion() [2/2]

◆ EditFacelistByReplacement() [1/2]

◆ EditFacelistByReplacement() [2/2]

◆ EditPointsByDeletion()

◆ EditPointsByInsertion() [1/2]

◆ EditPointsByInsertion() [2/2]

◆ EditPointsByReplacement() [1/2]

◆ EditPointsByReplacement() [2/2]

◆ GetFaceCount()

◆ GetPointCount()

◆ ObjectType()

◆ operator=() [1/2]

◆ operator=() [2/2]

◆ Optimize()

◆ Set()

◆ SetEdgeIndexColorsByList() [1/4]

◆ SetEdgeIndexColorsByList() [2/4]

◆ SetEdgeIndexColorsByList() [3/4]

◆ SetEdgeIndexColorsByList() [4/4]

◆ SetEdgeRGBColorsByList() [1/4]

◆ SetEdgeRGBColorsByList() [2/4]

◆ SetEdgeRGBColorsByList() [3/4]

◆ SetEdgeRGBColorsByList() [4/4]

◆ SetEdgeVisibilitiesByList() [1/4]

◆ SetEdgeVisibilitiesByList() [2/4]

◆ SetEdgeVisibilitiesByList() [3/4]

◆ SetEdgeVisibilitiesByList() [4/4]

◆ SetFaceIndexColorsByList() [1/4]

◆ SetFaceIndexColorsByList() [2/4]

◆ SetFaceIndexColorsByList() [3/4]

◆ SetFaceIndexColorsByList() [4/4]

◆ SetFaceIndexColorsByRange() [1/3]

◆ SetFaceIndexColorsByRange() [2/3]

◆ SetFaceIndexColorsByRange() [3/3]

◆ SetFacelist() [1/2]

◆ SetFacelist() [2/2]

◆ SetFaceNormalsByList() [1/4]

◆ SetFaceNormalsByList() [2/4]

◆ SetFaceNormalsByList() [3/4]

◆ SetFaceNormalsByList() [4/4]

◆ SetFaceNormalsByRange() [1/3]

◆ SetFaceNormalsByRange() [2/3]

◆ SetFaceNormalsByRange() [3/3]

◆ SetFaceRGBColorsByList() [1/4]

◆ SetFaceRGBColorsByList() [2/4]

◆ SetFaceRGBColorsByList() [3/4]

◆ SetFaceRGBColorsByList() [4/4]

◆ SetFaceRGBColorsByRange() [1/3]

◆ SetFaceRGBColorsByRange() [2/3]

◆ SetFaceRGBColorsByRange() [3/3]

◆ SetFaceVisibilitiesByList() [1/4]

◆ SetFaceVisibilitiesByList() [2/4]

◆ SetFaceVisibilitiesByList() [3/4]

◆ SetFaceVisibilitiesByList() [4/4]

◆ SetFaceVisibilitiesByRange() [1/3]

◆ SetFaceVisibilitiesByRange() [2/3]

◆ SetFaceVisibilitiesByRange() [3/3]

◆ SetMaterialMapping()

◆ SetPoints() [1/2]

◆ SetPoints() [2/2]

◆ SetTristrips() [1/2]

◆ SetTristrips() [2/2]

◆ SetVertexIndexColorsByList() [1/4]

◆ SetVertexIndexColorsByList() [2/4]