Inheritance diagram for HPS.NURBSSurfaceKit:
HPS.Kit HPS.Object

Public Member Functions

void Consume (HPS.NURBSSurfaceKit in_kit)
 
override void Dispose ()
 
HPS.NURBSSurfaceKit EditPointsByDeletion (ulong in_offset, ulong in_count)
 
HPS.NURBSSurfaceKit EditPointsByInsertion (ulong in_offset, HPS.Point[] in_points)
 
HPS.NURBSSurfaceKit EditPointsByReplacement (ulong in_offset, HPS.Point[] in_points)
 
HPS.NURBSSurfaceKit EditUKnotsByDeletion (ulong in_offset, ulong in_count)
 
HPS.NURBSSurfaceKit EditUKnotsByInsertion (ulong in_offset, float[] in_knots)
 
HPS.NURBSSurfaceKit EditUKnotsByReplacement (ulong in_offset, float[] in_knots)
 
HPS.NURBSSurfaceKit EditVKnotsByDeletion (ulong in_offset, ulong in_count)
 
HPS.NURBSSurfaceKit EditVKnotsByInsertion (ulong in_offset, float[] in_knots)
 
HPS.NURBSSurfaceKit EditVKnotsByReplacement (ulong in_offset, float[] in_knots)
 
HPS.NURBSSurfaceKit EditWeightsByDeletion (ulong in_offset, ulong in_count)
 
HPS.NURBSSurfaceKit EditWeightsByInsertion (ulong in_offset, float[] in_weights)
 
HPS.NURBSSurfaceKit EditWeightsByReplacement (ulong in_offset, float[] in_weights)
 
override bool Empty ()
 
override bool Equals (System.Object obj)
 
bool Equals (HPS.NURBSSurfaceKit in_kit)
 
override int GetHashCode ()
 
ulong GetPointCount ()
 
 NURBSSurfaceKit ()
 
 NURBSSurfaceKit (HPS.NURBSSurfaceKit in_kit)
 
override HPS.Type ObjectType ()
 
void Set (HPS.NURBSSurfaceKit in_kit)
 
HPS.NURBSSurfaceKit SetPoints (HPS.Point[] in_points)
 
HPS.NURBSSurfaceKit SetPriority (int in_priority)
 
HPS.NURBSSurfaceKit SetTrim (HPS.TrimKit in_trim)
 
HPS.NURBSSurfaceKit SetTrims (HPS.TrimKit[] in_trims)
 
HPS.NURBSSurfaceKit SetUCount (ulong in_count)
 
HPS.NURBSSurfaceKit SetUDegree (ulong in_degree)
 
HPS.NURBSSurfaceKit SetUKnots (float[] in_knots)
 
HPS.NURBSSurfaceKit SetUserData (IntPtr in_index, ulong in_bytes, byte[] in_data)
 
HPS.NURBSSurfaceKit SetUserData (IntPtr in_index, byte[] in_data)
 
HPS.NURBSSurfaceKit SetUserData (IntPtr[] in_indices, byte[][] in_data)
 
HPS.NURBSSurfaceKit SetVCount (ulong in_count)
 
HPS.NURBSSurfaceKit SetVDegree (ulong in_degree)
 
HPS.NURBSSurfaceKit SetVKnots (float[] in_knots)
 
HPS.NURBSSurfaceKit SetWeights (float[] in_weights)
 
void Show (out HPS.NURBSSurfaceKit out_kit)
 
bool ShowPoints (out HPS.Point[] out_points)
 
bool ShowPointsByList (ulong[] in_indices, out HPS.Point[] out_points)
 
bool ShowPointsByRange (ulong in_start_index, ulong in_count, out HPS.Point[] out_points)
 
bool ShowPriority (out int out_priority)
 
bool ShowTrims (out HPS.TrimKit[] out_trims)
 
bool ShowUCount (out ulong out_count)
 
bool ShowUDegree (out ulong out_degree)
 
bool ShowUKnots (out float[] out_knots)
 
bool ShowUserData (IntPtr in_index, out byte[] out_data)
 
bool ShowUserData (out IntPtr[] out_indices, out byte[][] out_data)
 
ulong ShowUserDataCount ()
 
bool ShowUserDataIndices (out IntPtr[] out_indices)
 
bool ShowVCount (out ulong out_count)
 
bool ShowVDegree (out ulong out_degree)
 
bool ShowVKnots (out float[] out_knots)
 
bool ShowWeights (out float[] out_weights)
 
HPS.NURBSSurfaceKit UnsetAllUserData ()
 
HPS.NURBSSurfaceKit UnsetEverything ()
 
HPS.NURBSSurfaceKit UnsetPoints ()
 
HPS.NURBSSurfaceKit UnsetPriority ()
 
HPS.NURBSSurfaceKit UnsetTrims ()
 
HPS.NURBSSurfaceKit UnsetUCount ()
 
HPS.NURBSSurfaceKit UnsetUDegree ()
 
HPS.NURBSSurfaceKit UnsetUKnots ()
 
HPS.NURBSSurfaceKit UnsetUserData (IntPtr in_index)
 
HPS.NURBSSurfaceKit UnsetUserData (IntPtr[] in_indices)
 
HPS.NURBSSurfaceKit UnsetVCount ()
 
HPS.NURBSSurfaceKit UnsetVDegree ()
 
HPS.NURBSSurfaceKit UnsetVKnots ()
 
HPS.NURBSSurfaceKit UnsetWeights ()
 
- Public Member Functions inherited from HPS.Kit
 Kit (HPS.Kit in_that)
 
override HPS.Type Type ()
 
- Public Member Functions inherited from HPS.Object
IntPtr GetClassID ()
 
IntPtr GetInstanceID ()
 
bool HasType (HPS.Type in_mask)
 
 Object (HPS.Object that)
 
virtual void Reset ()
 

Static Public Member Functions

static bool operator!= (HPS.NURBSSurfaceKit a, HPS.NURBSSurfaceKit b)
 
static bool operator== (HPS.NURBSSurfaceKit a, HPS.NURBSSurfaceKit b)
 
- Static Public Member Functions inherited from HPS.Object
static IntPtr ClassID< T > ()
 

Protected Member Functions

override void deleteCptr ()
 
- Protected Member Functions inherited from HPS.Object
virtual IntPtr GetNonDirectorClassID ()
 

Additional Inherited Members

- Protected Attributes inherited from HPS.Object
bool cMemOwn
 
HandleRef cptr
 

Detailed Description

The NURBSSurfaceKit class is a user space object. It is a kit analog to a NURBSSurfaceKey.

Constructor & Destructor Documentation

◆ NURBSSurfaceKit() [1/2]

HPS.NURBSSurfaceKit.NURBSSurfaceKit ( )
inline

The default constructor creates an empty NURBSSurfaceKit object.

◆ NURBSSurfaceKit() [2/2]

HPS.NURBSSurfaceKit.NURBSSurfaceKit ( HPS.NURBSSurfaceKit  in_kit)
inline

The copy constructor creates a new NURBSSurfaceKit object that contains the same settings as the source NURBSSurfaceKit.

Parameters
in_kitThe source NURBSSurfaceKit to copy.

Member Function Documentation

◆ Consume()

void HPS.NURBSSurfaceKit.Consume ( HPS.NURBSSurfaceKit  in_kit)
inline

Copies the source NURBSSurfaceKit into this NURBSSurfaceKit and resets the source kit.

Parameters
in_kitThe source NURBSSurfaceKit to consume.

◆ EditPointsByDeletion()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditPointsByDeletion ( ulong  in_offset,
ulong  in_count 
)
inline

Removes points from the control point list for this NURBSSurfaceKit.

Parameters
in_offsetThe offset into the control point list for the NURBSSurfaceKit at which to start removing points. This value must be such that in_offset<control_point_count for deletion to succeed.
in_countThe number of points to delete from the control point list for the NURBSSurfaceKit. This value must be such that in_offset+in_count<=control_point_count for the deletion to succeed.
Returns
A reference to this NURBSSurfaceKit.

◆ EditPointsByInsertion()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditPointsByInsertion ( ulong  in_offset,
HPS.Point []  in_points 
)
inline

Adds points to the control point list for this NURBSSurfaceKit.

Parameters
in_offsetThe offset into the control point list for the NURBSSurfaceKit at which to insert points. This value must be such that in_offset<control_point_count for insertion to succeed.
in_pointsThe points to insert into the control point list at the specified offset.
Returns
A reference to this NURBSSurfaceKit.

◆ EditPointsByReplacement()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditPointsByReplacement ( ulong  in_offset,
HPS.Point []  in_points 
)
inline

Replaces control points for this NURBSSurfaceKit.

Parameters
in_offsetThe offset into the control point list for the NURBSSurfaceKit at which to replace points. This value must be such that in_offset<control_point_count for insertion to succeed.
in_pointsThe points to use to replace those in the control point list at the specified offset. This size of the array must be such that in_offset+in_points.size()<=control_point_count for the replacement to succeed.
Returns
A reference to this NURBSSurfaceKit.

◆ EditUKnotsByDeletion()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditUKnotsByDeletion ( ulong  in_offset,
ulong  in_count 
)
inline

Removes knots in the U direction for this NURBSSurfaceKit. This will allow modification of the default knots in the U direction if no such explicit knots are set if possible.

Parameters
in_offsetThe offset into the knots in the U direction for the NURBSSurfaceKit at which to start removing knots. This value must be such that in_offset<u_count+u_degree+1 for deletion to succeed.
in_countThe number of knots in the U direction to delete for the NURBSSurfaceKit. This value must be such that in_offset+in_count<=u_count+u_degree+1 for the deletion to succeed.
Returns
A reference to this NURBSSurfaceKit.

◆ EditUKnotsByInsertion()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditUKnotsByInsertion ( ulong  in_offset,
float []  in_knots 
)
inline

Adds knots in the U direction for this NURBSSurfaceKit. This will allow modification of the default knots in the U direction if no such explicit knots are set if possible.

Parameters
in_offsetThe offset into the knots in the U direction for the NURBSSurfaceKit at which to insert knots. This value must be such that in_offset<u_count+u_degree+1 for insertion to succeed.
in_knotsThe knots to insert in the U direction at the specified offset.
Returns
A reference to this NURBSSurfaceKit.

◆ EditUKnotsByReplacement()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditUKnotsByReplacement ( ulong  in_offset,
float []  in_knots 
)
inline

Replaces knots in the U direction for this NURBSSurfaceKit. This will allow modification of the default knots in the U direction if no such explicit knots are set if possible.

Parameters
in_offsetThe offset into the knots in the U direction for the NURBSSurfaceKit at which to replace knots. This value must be such that in_offset<u_count+u_degree+1 for the replacement to succeed.
in_knotsThe knots to use to replace those in the U direction at the specified offset. The size of the array must be such that in_offset+in_knots.size()<=u_count+u_degree+1 for the replacement to succeed.
Returns
A reference to this NURBSSurfaceKit.

◆ EditVKnotsByDeletion()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditVKnotsByDeletion ( ulong  in_offset,
ulong  in_count 
)
inline

Removes knots in the V direction for this NURBSSurfaceKit. This will allow modification of the default knots in the V direction if no such explicit knots are set if possible.

Parameters
in_offsetThe offset into the knots in the V direction for the NURBSSurfaceKit at which to start removing knots. This value must be such that in_offset<v_count+v_degree+1 for deletion to succeed.
in_countThe number of knots in the V direction to delete for the NURBSSurfaceKit. This value must be such that in_offset+in_count<=v_count+v_degree+1 for the deletion to succeed.
Returns
A reference to this NURBSSurfaceKit.

◆ EditVKnotsByInsertion()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditVKnotsByInsertion ( ulong  in_offset,
float []  in_knots 
)
inline

Adds knots in the V direction for this NURBSSurfaceKit. This will allow modification of the default knots in the V direction if no such explicit knots are set if possible.

Parameters
in_offsetThe offset into the knots in the V direction for the NURBSSurfaceKit at which to insert knots. This value must be such that in_offset<v_count+v_degree+1 for insertion to succeed.
in_knotsThe knots to insert in the V direction at the specified offset.
Returns
A reference to this NURBSSurfaceKit.

◆ EditVKnotsByReplacement()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditVKnotsByReplacement ( ulong  in_offset,
float []  in_knots 
)
inline

Replaces knots in the V direction for this NURBSSurfaceKit. This will allow modification of the default knots in the V direction if no such explicit knots are set if possible.

Parameters
in_offsetThe offset into the knots in the V direction for the NURBSSurfaceKit at which to replace knots. This value must be such that in_offset<v_count+v_degree+1 for the replacement to succeed.
in_knotsThe knots to use to replace those in the V direction at the specified offset. The size of the array must be such that in_offset+in_knots.size()<=v_count+v_degree+1 for the replacement to succeed.
Returns
A reference to this NURBSSurfaceKit.

◆ EditWeightsByDeletion()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditWeightsByDeletion ( ulong  in_offset,
ulong  in_count 
)
inline

Removes weights from the control point weight list for this NURBSSurfaceKit. This will allow modification of the default control point weights if no explicit weights are set if possible.

Parameters
in_offsetThe offset into the control point weight list for the NURBSSurfaceKit at which to start removing weights. This value must be such that in_offset<control_point_count for deletion to succeed.
in_countThe number of weights to delete from the control point weight list for the NURBSSurfaceKit. This value must be such that in_offset+in_count<=control_point_count for the deletion to succeed.
Returns
A reference to this NURBSSurfaceKit.

◆ EditWeightsByInsertion()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditWeightsByInsertion ( ulong  in_offset,
float []  in_weights 
)
inline

Adds weights to the control point weight list for this NURBSSurfaceKit. This will allow modification of the default control point weights if no explicit weights are set if possible.

Parameters
in_offsetThe offset into the control point weight list for the NURBSSurfaceKit at which to insert weights. This value must be such that in_offset<control_point_count for insertion to succeed.
in_weightsThe weights to insert into the control point weight list at the specified offset.
Returns
A reference to this NURBSSurfaceKit.

◆ EditWeightsByReplacement()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.EditWeightsByReplacement ( ulong  in_offset,
float []  in_weights 
)
inline

Replaces control point weights for this NURBSSurfaceKit. This will allow modification of the default control point weights if no explicit weights are set if possible.

Parameters
in_offsetThe offset into the control point weight list for the NURBSSurfaceKit at which to replace weights. This value must be such that in_offset<control_point_count for insertion to succeed.
in_weightsThe weights to use to replace those in the control point weight list at the specified offset. This size of the array must be such that in_offset+in_weights.size()<=control_point_count for the replacement to succeed.
Returns
A reference to this NURBSSurfaceKit.

◆ Empty()

override bool HPS.NURBSSurfaceKit.Empty ( )
inlinevirtual

Indicates whether this NURBSSurfaceKit has any values set on it.

Returns
true if no values are set on this NURBSSurfaceKit, false otherwise.

Reimplemented from HPS.Object.

◆ Equals()

bool HPS.NURBSSurfaceKit.Equals ( HPS.NURBSSurfaceKit  in_kit)
inline

Check if the source NURBSSurfaceKit is equivalent to this NURBSSurfaceKit.

Parameters
in_kitThe source NURBSSurfaceKit to compare to this NURBSSurfaceKit.
Returns
true if the objects are equivalent, false otherwise.

◆ GetPointCount()

ulong HPS.NURBSSurfaceKit.GetPointCount ( )
inline

Retrieves the number of points in this NURBS surface.

Returns
The number of points in this NURBS surface.

◆ ObjectType()

override HPS.Type HPS.NURBSSurfaceKit.ObjectType ( )
inlinevirtual

This function returns the type the object, as declared (if the object is derived, this does not give the true type of the derived object).

Returns
The declared type of the object in question, which may differ from the true, underlying type.

Reimplemented from HPS.Kit.

◆ Set()

void HPS.NURBSSurfaceKit.Set ( HPS.NURBSSurfaceKit  in_kit)
inline

Copies the source NURBSSurfaceKit into this NURBSSurfaceKit.

Parameters
in_kitThe source NURBSSurfaceKit to copy.

◆ SetPoints()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetPoints ( HPS.Point []  in_points)
inline

Sets the control points for the NURBSSurfaceKit.

Parameters
in_pointsThe control points for the NURBSSurfaceKit.
Returns
A reference to this NURBSSurfaceKit.

◆ SetPriority()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetPriority ( int  in_priority)
inline

Assigns a specific drawing priority value to the NURBSSurfaceKit. It affects the order in which the contents of this segment are drawn if and only if the rendering algorithm is set to Priority.

Parameters
in_priorityThe drawing priority, higher priority items are drawn on top of lower priority items.
Returns
A reference to this object.
See also
SubwindowKit.SetPriority()
SubwindowKit.SetRenderingAlgorithm()

◆ SetTrim()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetTrim ( HPS.TrimKit  in_trim)
inline

Sets the trim for the NURBSSurfaceKit.

Parameters
in_trimThe trim for the NURBSSurfaceKit.
Returns
A reference to this NURBSSurfaceKit.

◆ SetTrims()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetTrims ( HPS.TrimKit []  in_trims)
inline

Sets the trims for the NURBSSurfaceKit.

Parameters
in_trimsThe trims for the NURBSSurfaceKit.
Returns
A reference to this NURBSSurfaceKit.

◆ SetUCount()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetUCount ( ulong  in_count)
inline

Sets the number of control points in the U direction for the NURBSSurfaceKit.

Parameters
in_countThe number of control points in the U direction for the NURBSSurfaceKit.
Returns
A reference to this NURBSSurfaceKit.

◆ SetUDegree()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetUDegree ( ulong  in_degree)
inline

Sets degree of the NURBSSurfaceKit in the U direction.

Parameters
in_degreeThe degree of the NURBSSurfaceKit in the U direction.
Returns
A reference to this NURBSSurfaceKit.

◆ SetUKnots()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetUKnots ( float []  in_knots)
inline

Sets the knots in the U direction for the NURBSSurfaceKit. If no knots are set when this kit is used to insert a NURBS surface, default knots of increasing value in the range [0,u_count+u_degree+1) will be used.

Parameters
in_knotsThe knots in the U direction for the NURBSSurfaceKit.
Returns
A reference to this NURBSSurfaceKit.

◆ SetUserData() [1/3]

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetUserData ( IntPtr  in_index,
ulong  in_bytes,
byte []  in_data 
)
inline

Sets user data on this kit.

Parameters
in_indexThe index of the user data to set.
in_bytesThe number of bytes of user data to set.
in_dataThe bytes of user data to set.
Returns
A reference to this kit.

◆ SetUserData() [2/3]

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetUserData ( IntPtr  in_index,
byte []  in_data 
)
inline

Sets user data on this kit.

Parameters
in_indexThe index of the user data to set.
in_dataThe bytes of user data to set.
Returns
A reference to this kit.

◆ SetUserData() [3/3]

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetUserData ( IntPtr []  in_indices,
byte  in_data[][] 
)
inline

Sets user data on this kit.

Parameters
in_indicesAn array of user data indices to set.
in_dataAn array of bytes of user data to set.
Returns
A reference to this kit.

◆ SetVCount()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetVCount ( ulong  in_count)
inline

Sets the number of control points in the V direction for the NURBSSurfaceKit.

Parameters
in_countThe number of control points in the V direction for the NURBSSurfaceKit.
Returns
A reference to this NURBSSurfaceKit.

◆ SetVDegree()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetVDegree ( ulong  in_degree)
inline

Sets degree of the NURBSSurfaceKit in the V direction.

Parameters
in_degreeThe degree of the NURBSSurfaceKit in the V direction.
Returns
A reference to this NURBSSurfaceKit.

◆ SetVKnots()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetVKnots ( float []  in_knots)
inline

Sets the knots in the V direction for the NURBSSurfaceKit. If no knots are set when this kit is used to insert a NURBS surface, default knots of increasing value in the range [0,v_count+v_degree+1) will be used.

Parameters
in_knotsThe knots in the V direction for the NURBSSurfaceKit.
Returns
A reference to this NURBSSurfaceKit.

◆ SetWeights()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.SetWeights ( float []  in_weights)
inline

Sets the control point weights for the NURBSSurfaceKit. If no weights are set when this kit is used to insert a NURBS surface, default weights of 1.0f per control point will be used.

Parameters
in_weightsThe control point weights for the NURBSSurfaceKit.
Returns
A reference to this NURBSSurfaceKit.

◆ Show()

void HPS.NURBSSurfaceKit.Show ( out HPS.NURBSSurfaceKit  out_kit)
inline

Copies this NURBSSurfaceKit into the given NURBSSurfaceKit.

Parameters
out_kitThe NURBSSurfaceKit to populate with the contents of this NURBSSurfaceKit.

◆ ShowPoints()

bool HPS.NURBSSurfaceKit.ShowPoints ( out HPS.Point []  out_points)
inline

Shows the control points for this NURBSSurfaceKit.

Parameters
out_pointsThe control points for this NURBSSurfaceKit.
Returns
true if control points were set, false otherwise.

◆ ShowPointsByList()

bool HPS.NURBSSurfaceKit.ShowPointsByList ( ulong []  in_indices,
out HPS.Point []  out_points 
)
inline

Show a subset of the points for this NURBSSurfaceKit by list.

Parameters
in_indicesThe list of point indices to show.
out_pointsThe requested points for this NURBSSurfaceKit.
Returns
true if all requested points were set, false otherwise.

◆ ShowPointsByRange()

bool HPS.NURBSSurfaceKit.ShowPointsByRange ( ulong  in_start_index,
ulong  in_count,
out HPS.Point []  out_points 
)
inline

Show a subset of the points for this NURBSSurfaceKit by range.

Parameters
in_start_indexThe first point to show.
in_countThe number of points to show.
out_pointsThe requested points for this NURBSSurfaceKit.
Returns
true if all requested points were set, false otherwise.

◆ ShowPriority()

bool HPS.NURBSSurfaceKit.ShowPriority ( out int  out_priority)
inline

Shows the drawing priority.

Parameters
out_priorityThe drawing priority, higher priority items are drawn on top of lower priority items.
Returns
true if the setting is valid, false otherwise.

◆ ShowTrims()

bool HPS.NURBSSurfaceKit.ShowTrims ( out HPS.TrimKit []  out_trims)
inline

Shows the trims for this NURBSSurfaceKit.

Parameters
out_trimsThe trims for this NURBSSurfaceKit.
Returns
true if trims were set, false otherwise.

◆ ShowUCount()

bool HPS.NURBSSurfaceKit.ShowUCount ( out ulong  out_count)
inline

Shows the number of control points in the U direction for this NURBSSurfaceKit.

Parameters
out_countThe number of control points in the U direction for this NURBSSurfaceKit.
Returns
true if such a count was set, false otherwise.

◆ ShowUDegree()

bool HPS.NURBSSurfaceKit.ShowUDegree ( out ulong  out_degree)
inline

Shows the degree of this NURBSSurfaceKit in the U direction.

Parameters
out_degreeThe degree of this NURBSSurfaceKit in the U direction.
Returns
true if such a degree was set, false otherwise.

◆ ShowUKnots()

bool HPS.NURBSSurfaceKit.ShowUKnots ( out float []  out_knots)
inline

Shows the knots in the U direction for this NURBSSurfaceKit.

Parameters
out_knotsThe knots in the U direction for this NURBSSurfaceKit.
Returns
true if these knots were set, false otherwise.

◆ ShowUserData() [1/2]

bool HPS.NURBSSurfaceKit.ShowUserData ( IntPtr  in_index,
out byte []  out_data 
)
inline

Shows the user data at a given index for this kit.

Parameters
in_indexThe index of the user data to show.
out_dataThe user data at the given index.
Returns
true if there is user data at the given index, false otherwise.

◆ ShowUserData() [2/2]

bool HPS.NURBSSurfaceKit.ShowUserData ( out IntPtr []  out_indices,
out byte  out_data[][] 
)
inline

Shows all user data for this kit.

Parameters
out_indicesAn array of all user data indices set on this kit.
out_dataAn array of all user data set on this kit.
Returns
true if there is user data on this kit, false otherwise.

◆ ShowUserDataCount()

ulong HPS.NURBSSurfaceKit.ShowUserDataCount ( )
inline

Get the number of user data indices set on this kit.

◆ ShowUserDataIndices()

bool HPS.NURBSSurfaceKit.ShowUserDataIndices ( out IntPtr []  out_indices)
inline

Shows the indices of all user data set on this kit.

Parameters
out_indicesThe user data indices set on this kit.
Returns
The number of user data indices set on this kit.

◆ ShowVCount()

bool HPS.NURBSSurfaceKit.ShowVCount ( out ulong  out_count)
inline

Shows the number of control points in the V direction for this NURBSSurfaceKit.

Parameters
out_countThe number of control points in the V direction for this NURBSSurfaceKit.
Returns
true if such a count was set, false otherwise.

◆ ShowVDegree()

bool HPS.NURBSSurfaceKit.ShowVDegree ( out ulong  out_degree)
inline

Shows the degree of this NURBSSurfaceKit in the V direction.

Parameters
out_degreeThe degree of this NURBSSurfaceKit in the V direction.
Returns
true if such a degree was set, false otherwise.

◆ ShowVKnots()

bool HPS.NURBSSurfaceKit.ShowVKnots ( out float []  out_knots)
inline

Shows the knots in the V direction for this NURBSSurfaceKit.

Parameters
out_knotsThe knots in the V direction for this NURBSSurfaceKit.
Returns
true if these knots were set, false otherwise.

◆ ShowWeights()

bool HPS.NURBSSurfaceKit.ShowWeights ( out float []  out_weights)
inline

Shows the control point weights for this NURBSSurfaceKit.

Parameters
out_weightsThe control point weights for this NURBSSurfaceKit.
Returns
true if control point weights were set, false otherwise.

◆ UnsetAllUserData()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetAllUserData ( )
inline

Removes all user data from this kit.

Returns
A reference to this kit.

◆ UnsetEverything()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetEverything ( )
inline

Removes all settings from the NURBSSurfaceKit.

Returns
A reference to this NURBSSurfaceKit.

◆ UnsetPoints()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetPoints ( )
inline

Removes the control points for the NURBSSurfaceKit.

Returns
A reference to this NURBSSurfaceKit.

◆ UnsetPriority()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetPriority ( )
inline

Removes a drawing priority setting.

Returns
A reference to this object.

◆ UnsetTrims()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetTrims ( )
inline

Removes the trims from the NURBSSurfaceKit.

Returns
A reference to this NURBSSurfaceKit.

◆ UnsetUCount()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetUCount ( )
inline

Removes the setting for the number of points in the U direction for the NURBSSurfaceKit.

Returns
A reference to this NURBSSurfaceKit.

◆ UnsetUDegree()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetUDegree ( )
inline

Removes the setting for the degree of the NURBSSurfaceKit in the U direction.

Returns
A reference to this NURBSSurfaceKit.

◆ UnsetUKnots()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetUKnots ( )
inline

Removes the knots in the U direction for the NURBSSurfaceKit.

Returns
A reference to this NURBSSurfaceKit.

◆ UnsetUserData() [1/2]

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetUserData ( IntPtr  in_index)
inline

Removes the user data at the given index from this kit.

Parameters
in_indexThe index of the user data to remove.
Returns
A reference to this kit.

◆ UnsetUserData() [2/2]

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetUserData ( IntPtr []  in_indices)
inline

Removes the user data at the given indices from this kit.

Parameters
in_indicesThe indices of the user data to remove.
Returns
A reference to this kit.

◆ UnsetVCount()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetVCount ( )
inline

Removes the setting for the number of points in the V direction for the NURBSSurfaceKit.

Returns
A reference to this NURBSSurfaceKit.

◆ UnsetVDegree()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetVDegree ( )
inline

Removes the setting for the degree of the NURBSSurfaceKit in the V direction.

Returns
A reference to this NURBSSurfaceKit.

◆ UnsetVKnots()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetVKnots ( )
inline

Removes the knots in the V direction for the NURBSSurfaceKit.

Returns
A reference to this NURBSSurfaceKit.

◆ UnsetWeights()

HPS.NURBSSurfaceKit HPS.NURBSSurfaceKit.UnsetWeights ( )
inline

Removes the control point weights for the NURBSSurfaceKit.

Returns
A reference to this NURBSSurfaceKit.

The documentation for this class was generated from the following file:
  • internals/hps_core/source/cs/HPS.NURBSSurfaceKit.cs