###################
System Requirements
###################



Prior to any installation, please check with your Tetra4D software provider the requirements and
recommendations to run the Tetra4D “Automate”.

**Note:** Tetra4D Automate requires templates created with Tetra4D Enrich to operate.

Windows
=======

* 1.5GHz or faster processor
* 1GB of RAM
* 350MB of available hard-disk space
* 1024x768 (minimum) screen resolution
* Video hardware acceleration (optional)
* Supported Operating Systems (64-bit only)

  - Windows Workstations:

    - Windows 10
    - Windows 11

  - Windows Server:

    - Windows Server 2016
    - Windows Server 2019
    - Windows Server 2022

  **Note:** Windows Server 2012 / R2 is no longer officially supported by Microsoft and is not
  recommended for new installations.

Installation of Tetra4D Automate
================================

  1. Download and run the "Tetra4D Automate" installer. The installer should have been emailed to you along with your license/serial number. You can also find it in your `Customer Portal <https://tetra4d.com/customer-portal>`_.

    .. figure:: _static/images/automate_help/page5_img1_annotated.png
      :align: center

  2. Read and accept the End User License Agreement

    .. figure:: _static/images/automate_help/page5_img2_annotated.png
      :align: center

  3. Enter your user information (optional), then click Next to continue:

    .. figure:: _static/images/automate_help/page6_img1_annotated.png
      :align: center

  4. | Select the installation folder, then click **Next** to continue:
     | **Remark**:
     | The installation process will create the main folder and a set of sub-folders, including a
     | sample data set that can be used to for deployment.

    .. figure:: _static/images/automate_help/page6_img2_annotated.png
       :align: center

  5. Review the installation information and click Install:

    .. figure:: _static/images/automate_help/page7_img1_annotated.png
       :align: center

  6. At the end of the installation process, click Finish.

    .. figure:: _static/images/automate_help/page7_img2_annotated.png
       :align: center