####################### Tetra4D Enrich 2025 SP1 ####################### .. sidebar:: .. contents:: Table of Contents :local: :depth: 2 Definition of Release Types --------------------------- We define each release type as follows: * **Major release:** A major release associated with an incremented release number (e.g. 2025) and an approximate 12 months’ product cycle. * **Minor release:** An update between major releases that may include support for new file formats, new versions of currently supported formats, and bug fixes. These updates are Service Packs (SP), and are defined with an additional incremented number put aside the major release information (e.g. 2025.1 for the first Service pack of release 2025). * **Out of cycle patch:** An unscheduled update. These contain few functional updates with the intention to limit impact. Version Information ------------------- .. list-table:: :widths: 20 80 :header-rows: 1 * - Item - Version Number * - Tetra4D Enrich - 2025.1.x Notice that the third number is used to differentiate builds of the software, and may not be continuous. Installation ------------ This version can be installed over any prior installation of Tetra4D Enrich. For more installation information, please refer to the Tetra4D Enrich Installation Guide or visit our Learning page. Language Support Overview ------------------------- Tetra4D Enrich provides support for multiple languages as noted in the table below. However, the language used is controlled by the local Adobe® Acrobat® installation. If there is a Tetra4D Enrich language option that matches the Acrobat installation, then that language is used; if not, Tetra4D Enrich defaults to English. Tier 1 and Tier 2 are as defined by Adobe Systems. .. list-table:: :widths: 20 80 :header-rows: 1 * - Tier - Supported Languages * - Tier 1 - English, French, German, Japanese * - Tier 2 - Brazilian Portuguese, Italian, Korean, Spanish, Simplified Chinese Acrobat Pro Compatibility ------------------------- The Tetra4D Enrich is a plug-in for Adobe Acrobat Pro. The following table provides information about tested version compatibility. Note that older versions of Tetra4D Enrich may work with newer Acrobat Pro releases, even if compatibility is not explicitly mentioned here. .. list-table:: :widths: 20 80 :header-rows: 1 * - Tetra4D Enrich - Compatible Acrobat Pro 64 bits Versions * - 2025.1 - | **Acrobat Pro Continuous Release** | 2021.001.20138 - to 2025.001.20813 | **Acrobat Pro 2024** | 2024.001.30159 - to 2024.001.30264 .. note:: The ADOBE Products and technical support periods can be found here. System Requirements =================== Please refer to the Tetra4D Enrich :doc:`Installation Guide ` to access to the system requirements. Licensing ========= Message for Tetra4D Enrich existing customers --------------------------------------------- **Tetra4D Enrich 2025 SP1** is a minor release, and doesn’t require a new license if you already installed and licensed **Tetra4D Enrich 2025**. If you didn’t already install and license **Tetra4D Enrich 2025**, you will need to change your license and activate the seats when Tetra4D Enrich 2025 SP1 is installed. Notice that if you are under regular maintenance, you should automatically receive information to retrieve your serial number for Tetra4D Enrich 2025, in an email from tetra4d.com. Please carefully read the :doc:`Tetra4D Enrich Installation Guide ` for explanations on how to activate your licenses. New Tetra4D Enrich customers ---------------------------- You should have automatically received information to retrieve your serial number for **Tetra4D Enrich 2025**, in an email from tetra4d.com. Please carefully read the :doc:`Tetra4D Enrich Installation Guide ` for instructions on how to activate your licenses. Note: Tetra4D Enrich will run in trial mode for 28 days after completing the installation, providing you with the ability to use the product temporarily without a serial number. You will have full functionality of the software during the trial period. If you experience any problem during the installation and activation process, please contact support by visiting our Learning page. Information about the licensing management solution --------------------------------------------------- The licensing management solution for Tetra4D Enrich offers flexibility and autonomy for customers to manage their licenses: * Licensing Tetra4D Enrich can be done directly by customers, without requiring customers to contact Tetra4D support * Online and offline activations are supported: * Online activation requires a few actions and is fully performed within the product (no support request, no email communication) * In case of offline activation, information to activate the seat has to be communicated through email via submitting a support ticket. * Activation / deactivation is enabled making it possible to transfer a license from one system to another: * In cases where a system / license is no longer used and has to be transferred to another one * The transfer can be performed directly by the customer .. note:: * The transfer of a license has to be occasional, and is allowed in case of: * Computer crash * Computer change The Tetra4D support team is available to answer any questions and to assist whenever needed. To receive assistance from the support team, please contact support by visiting our Learning page. Format Support -------------- This release supports reading the following 3D file formats: .. list-table:: :widths: 30 30 40 :header-rows: 1 * - Format - Version - Extensions * - 3MF - 1.2.3 - 3MF * - ACIS (SAT) - Up to version 2023 - SAT, SAB * - Autodesk AutoCAD (3D only) - Up to v2019 - DWG, DXF * - Autodesk DWF - Any - DWF, DWFX * - Autodesk Inventor - Up to 2026 - IPT, IAM * - CATIA V4 - Up to 4.2.5 - MODEL, SESSION, DLV, EXP * - CATIA V5 - Up to V5_6R2025 - CATDrawing, CATPart, CATProduct, CATShape, CGR * - CATIA V6 - Up to V5-6 R2019 (R29) - 3DXML * - FBX - ASCII: from 7100 to 7400. Binary: all - FBX * - GL Transmission format - 2.0 - GLTF, GLB * - I-deas - Up to 13.x (NX 5), NX I-deas 6 - MF1, ARC, UNV, PKG * - IGES - 5.1, 5.2, 5.3 - IGS, IGES * - Industry Foundation Classes (IFC) - IFC2x Editions 2, 3 and 4 - IFC, IFCZIP * - JT - Up to version 10.9 - JT * - Parasolid (X_T) - Up to v37.1 - X_B, X_T, XMT, XMT_TXT * - PRC - All Versions - PRC * - PTC Creo - Pro/Engineer 19.0 to Creo 12.0 - ASM, NEU, PRT, XAS, XPR * - PTC Pro/Engineer - Up to Wildfire 5 - ASM, NEU, PRT, XAS, XPR * - REVIT - 2015 to 2025 - RVT, RFA * - Rhino - 4, 5, 6, 7, 8 - 3DM * - Siemens PLM Software NX - V11.0 to NX 12, and up to NX 2506 - PRT * - Solid Edge - V19 - 20, ST – ST10 - Up to 2025 - ASM, PAR, PWD, PSM * - SolidWorks - Up to 2025 - SLDASM, SLDPRT * - STEP - AP 203 E1/E2, AP 214, AP 242 - STP, STEP, STPZ * - STEP XML - All versions - STPX, STPXZ * - Stereo Lithography (STL) - All Versions - STL * - Universal 3D (U3D) - ECMA-363 (1st to 3rd editions) - U3D * - VDA-FS - Version 1.0 and 2.0 - VDA * - VRML - V1.0 and V2.0 - WRL, VRML * - Wavefront - Any - OBJ This release supports writing the following 3D file formats: .. list-table:: :widths: 50 50 :header-rows: 1 * - Format - Extensions * - 3MF - 3MF * - ACIS - SAT, SAB * - FBX - FBX * - glTF - GLTF, GLB * - IGES - IGS, IGES * - JT - JT * - Parasolid - X_T * - PRC - PRC * - STEP - STP, STEP, STP.Z * - Stereo Lithography (STL) - STL * - Universal 3D (U3D) - U3D * - VRML - WRL, VRML * - Wavefront - OBJ Updated formats support and Reader/Writer enhancements ====================================================== This section outlines the CAD Readers and Writers that have been added or improved in this new Tetra4D Enrich release. CAD Reader: Inventor --------------------- * Support for version 2026 CAD Reader: Catia V5 --------------------- * Support for version CV5-6R2025 CAD Reader: Creo ---------------- * Support for version 12 CAD Reader: Siemens/NX ---------------------- * Support for version 2506 Bug Fixes ========= The 2025 SP1 release of the Tetra4D Enrich fixes several customers’ reported issues. Please contact support by visiting our support page if you have questions about any specific issue.