A3DCollisionParameterData

struct A3DCollisionParameterData

A3DCollisionParameterData structure.

11.1

Index

Variables

• m_dSafetyDistance
• m_dContactLimit
• m_dTessellationTolerance

Variables

A3DDouble A3DCollisionParameterData.m_dSafetyDistance

A3DDouble

It makes possible to identify parts between which a specified distance is not verified.

The safety distance value has to be greater than m_dContactLimit

A3DDouble A3DCollisionParameterData.m_dContactLimit

A3DDouble

This value defines the upper limit of distances interval in which the parts are judged “in contact”.

The minimum value for the contact limit 0.1 mm, or can be set to 0. to check only clearance and collision cases.

A3DDouble A3DCollisionParameterData.m_dTessellationTolerance

A3DDouble

Computation tolerance.

The minimal value is 0.01 mm. The tolerance value cannot be greater than m_dContactLimit.