HOOPS 3DF 31.30
Overview
Tech Soft 3D is pleased to announce the release of HOOPS 3DF version 31.30. This update delivers major performance gains for cutting planes and point cloud preprocessing, a significantly faster SketchUp import, and a modernized, fully reported third-party stack.
What’s New in 31.30
Faster cutting planes and point cloud processing
Interactive cutting is now dramatically faster.
Much faster cut geometry: The generation of cutting-plane cap geometry was heavily optimized, so exploring a model with active cutting planes now stays fluid on models that were previously impractical to section interactively.
Faster OOC preprocessing: Out-of-Core preprocessing runs much faster on unsorted point data, which is typically produced by scanning hardware.
Bigger OOC working set: The default memory limit of the OOC preprocessor was raised from 512 MB to 4096 MB, which alone removes most spilling for today’s scan sizes.
Faster SketchUp Integration
The SketchUp import path was overhauled around its texture handling.
SketchUp SDK 2026.1: The integration now builds on SketchUp SDK 2026.1 for Visual Studio 2022 toolchains.
Textures no longer block the import: Models full of textures no longer appear to hang on import because their texture images are now passed in memory instead of through temporary files.
Fewer surprises on the model: Component definitions referenced only by groups in the SketchUp model are now imported too, where they were previously missing.
A modernized, fully reported dependency stack
This release closes the main remaining gaps of the security work started in 31.20.
One zlib everywhere: Every component, including FreeType’s gzip module, now uses zlib 1.3.2; the residual zlib 1.3.1 embedded in FreeType was itself carrying known vulnerabilities (CVE-2026-4176).
Third-party libraries ship as separate static libraries: zlib, FreeType, libpng and libtiff are no longer compiled into the HOOPS libraries. Static-linking applications must now link these archives too; see the platform note below.
Automated SBOM reporting: Customer packages now ship versioned Software Bill of Materials (SBOM) artifacts in both SPDX 2.3 and CycloneDX 1.6 formats. The SBOM are currently provided as beta, for better integration into any tracking system.
Hardened HSF reading: Four crashes in the HSF file-reading path reported out of a 0-day vulnerability review were fixed; a new round of hardened checks now rejects corrupted segment names, face indices and compressed point data with a clean error instead of crashing.
Faithful E57 scans
The Out-of-Core E57 import now reads scans the way laser scanners actually write them: points flagged as invalid by the scanner are skipped instead of being imported as a cluster of bogus geometry, and scans stored in spherical coordinates are converted to cartesian coordinates on import.
Technology Update
Platform Changes
Improved deployment on Linux and macOS: Shipped shared libraries and executables on Linux and macOS now record the location of their dependencies relative to their own directory, instead of an absolute path recorded at build time. This means the package can be installed anywhere and will still load correctly.
- Linux uses a
$ORIGINRPATH. In earlier releases, DT_RUNPATH was not inherited from the executable, which could cause load failures after deployment to a different location. - macOS uses an
@loader_pathRPATH. In earlier releases, macOS binaries carried no relative RPATH at all, which could cause load failures after deployment to a different location.
- Linux uses a
Breaking change for static linking: third-party libraries are no longer compiled into the HOOPS libraries. zlib, FreeType, libpng and libtiff now link as separate static libraries. Applications that link the static HOOPS libraries must now also link the archives of these libraries, which ship in the package:
- Windows:
Dev_Tools/3rdParty/<library>/lib/<platform>/holdszlibstat_mt.lib,zlibstat_md.lib,freetypestat_mt.lib,freetypestat_md.lib,libpng16_staticstat_*.libandtiffstat_*.lib. - Linux:
bin/<platform>/holdslibz.a,libfreetype.a,libpng.aandlibtiff.a. - Android and iOS:
lib/<platform>/holds the same archives, and these platforms no longer link the system zlib.
Some archives were renamed to drop the HOOPS prefix:
hoops_tiffstat_*.libis nowtiffstat_*.lib, andlibhoopspng.aandlibhoopstiff.a(Linux),libhoops_png.a(Android) andlibhoops_tiff.a(iOS) are nowlibpng.aandlibtiff.a. Source packages contain the release sources of these libraries underDev_Tools/3rdParty/<library>, built as static libraries by thecmake/partner/Find*.cmakemodules. See Installing HOOPS Visualize for the updated package layout.- Windows:
Windows deployment of E57 runtime DLLs: The E57 support of the Out-of-Core preprocessor now consumes libE57Format and xerces-c as shared libraries, so the Windows packages ship
E57Format.dllandxerces-c_3_2.dllinbin/<platform>. An application that deploys ooc.exe, hoops_ooc.dll or the HIO OOC plug-in must ship these two DLLs alongside them.Software Bill of Materials (SBOM) Versioned SBOM artifacts are now provided in both SPDX 2.3 and CycloneDX 1.6 formats for all customer packages. This enhancement supports transparency, security review, and compliance workflows for partners.
Upcoming Change Affecting All Platforms: Beginning with HOOPS Visualize 3DF 32.00, planned for release in February 2027, C++17 will be required as the minimum supported C++ language standard for building and developing HOOPS Visualize. This change affects customers who compile Visualize-related source code, including source code provided with Visualize distributions such as MVO modules, 3DPartViewer, sample applications, and sandbox applications.
See the platform deprecation announcements under the Deprecations section.
Third-Party Library Updates
| Library | New Version |
|---|---|
| libpng | 1.6.58 |
| SketchUp SDK | 2026.1 |
| zlib | 1.3.2 |
Note that zlib 1.3.2 is now used by every component, including the gzip support inside FreeType, which previously embedded zlib 1.3.1. FreeType 2.14.1 and libtiff 4.7.2 are unchanged at the source level, but they now ship as separate static libraries instead of being compiled into the HOOPS libraries; see the platform note above. The SketchUp SDK 2026.1 packages are provided for Visual Studio 2022 (v143) only; the Visual Studio 2019 (v142) packages keep SketchUp SDK 2023.
Library Compatibility Information
| Library Name | Version | Windows | Linux | OS X | Notes |
|---|---|---|---|---|---|
| DGN Direct | 4.2 | ![]() |
![]() |
![]() |
|
| HOOPS Visualize Web | 2026.6.0 | ![]() |
![]() |
![]() |
HTML HIO only works with Visual Studio v142. |
| HOOPS Exchange | 2026.8.0 | ![]() |
![]() |
![]() |
|
| HOOPS Luminate | 2026.1.0 | ![]() |
![]() |
![]() |
|
| .NET Framework | 4.8 | ![]() |
![]() |
![]() |
Required for VS 2019 libraries and samples. |
| .NET Standard | 2.0 | ![]() |
![]() |
![]() |
Required for VS 2019 and 2022 libraries. |
| .NET Core | 8.0 | ![]() |
![]() |
![]() |
Required for VS 2022 samples. |
| Parasolid | 35.1 | ![]() |
![]() |
![]() |
|
| Qt | 6.5.3 | ![]() |
![]() |
![]() |
|
| Qt | 5.12.7 | ![]() |
![]() |
![]() |
Visualize is compatible with Qt 5.4 only on OSX |
| RealDWG | 2023 | ![]() |
![]() |
![]() |
RealDWG 2023 is only compatible with Visual Studio 2019 (v142 toolchain) |
| RealDWG | 2025 | ![]() |
![]() |
![]() |
RealDWG 2025 is only compatible with Visual Studio 2022 (v143 toolchain) |
| SketchUp | 2023 | ![]() |
![]() |
![]() |
64-bit Windows only. Visual Studio 2019 (v142) packages. Requires Visual Studio 2019 Redistributable. |
| SketchUp | 2026.1 | ![]() |
![]() |
![]() |
64-bit Windows only. Visual Studio 2022 (v143) packages. Requires Visual Studio 2022 Redistributable. |
New Features
- Cutting-plane performance: The generation of cutting-plane cap geometry is up to six times faster on large models. In 31.20 and earlier, sectioning a large model blocked the update for most of its duration, which made interactive sectioning impractical on such models.
API Changes
- Functional Changes Segment display lists now compile the view-independent edge types (perimeter, hard, adjacent and mesh-quad edges) of a shell into the display list batch. View-dependent edges, such as silhouettes, cannot be compiled because they change with the viewpoint; they are recomputed every frame and drawn alongside the batch. In earlier releases, a shell whose visibility asked for silhouettes had all of its edge types rejected from the segment display list and redrawn in immediate mode every frame. This was especially costly at edge weights above 1, where rejected edges are re-expanded into triangles on the CPU.
- SketchUp HIO: texture images are now read with their color channels in the correct order (previously the red and blue channels were swapped), and an alpha channel is generated only when the SketchUp material uses one. Models whose textures reference missing or invalid image files import without error; the affected faces render untextured.
- OOC E57 import: ooc.exe handles E57 files more faithfully.
- Invalid points are skipped. Points an E57 scan flags as invalid, meaning the scanner got no usable measurement for them (no return, or a target out of range), are now dropped. In earlier releases, those points were imported as real geometry, and typically showed up as a cluster at the origin or at the scanner’s maximum range. A scan can therefore contribute fewer points than it declares.
- Scans in spherical coordinates. Scans that store their points in spherical coordinates (range, azimuth, elevation) are now read, and converted to cartesian coordinates since point clouds are processed in cartesian space only. In earlier releases, such a scan was imported without error as a single cluster of points at the origin.
- OOC preprocessing: the default maximum memory usage is now 4096 MB (previously 512 MB).
This applies to the ooc.exe
-moption and to the preprocessor’sSetMaxMemoryUsage. Pass a lower value if the preprocessing machine has less memory available. See ooc.exe Command Line Executable. - OOC preprocessing: points are better redistributed between processing nodes. When one OOC node reached its memory limit, the preprocessor sent its excess points to a less crowded node. In release builds this redistribution could silently drop the points it was transferring; all points of the cloud are now preserved.
- SketchUp HIO: texture-heavy SKP files import much faster because texture images are now passed to the SketchUp SDK in memory instead of being written to temporary files, so models that previously appeared to hang on import load in a fraction of the time. Component definitions referenced only by groups of the SketchUp model are now imported; in earlier releases, those definitions and the geometry that referenced them were missing from the imported model.
- Occlusion queries are now destroyed automatically when the driver releases them, so calling
HIC_Delete_Occlusion_Queryafter a driver-side wait is no longer needed and would be a double delete. Occlusion-query waits are also bounded: a query that never completes stops blocking the update after one second, and if its result is unknown, the object is treated as visible instead of occluded. In earlier releases, an unresponsive query could stall the update, and a timed-out query was reported as occluded, which could drop geometry from the screen in depth peeling. - Merged cut vertices are no longer averaged across the surfaces they came from, so the position of a cutting-plane cap can shift by up to the merge tolerance where several cap pieces were welded together. The rendering of the cap is unchanged otherwise.
Documentation Changes
The segment display list documentation in the Programming Guide now describes which edge types are compiled into the batch and which are recomputed every frame.
The SketchUp HIO integration documentation now describes texture color channel ordering, alpha channel generation, the behavior when referenced texture images are missing or invalid, and the SketchUp SDK version to use per Visual Studio toolchain.
The ooc.exe documentation now describes how E57 scans stored in spherical coordinates and points flagged as invalid are handled, and states the new 4096 MB default memory limit.
The OOC preprocessing documentation now states the new 4096 MB default memory limit.
The Point Cloud API documentation now lists the E57 runtime DLLs that Windows deployment requires.
The stream toolkit documentation and the Installation Contents page now describe the separate static libraries applications must link when zlib, FreeType, libpng and libtiff are no longer compiled into the HOOPS libraries.
The Supported Platforms page now documents the relocatable Linux and macOS libraries and their deployment requirements.
The Shadows page of the Programming Guide now documents the depth-only shadow fallback for geometry whose custom shader fails to compile in a shadow pass.
The Cellular Volumes chapter of the Programming Guide now describes the point order of the basic cells, the selection and highlighting of cells and other volume subentities, cutting and capping, HSF files, and the data extraction, deletion and double-precision functions.
It also corrects the descriptions of the SEPARATOR and MIXED values.
Deprecations
- Platform Deprecation Announcement: Support for Visual Studio 2019 (toolchain 14.2) and .Net 8 will be discontinued in 3DF 32.00. Continued support for this platform will only be available in the 3DF LTS release stream beyond December 2026.
- Platform Deprecation Announcement: Support for MacOS on Intel architecture will be discontinued starting with 3DF 32.00 and 30.80-LTS due to the end of support in MacOS 27. Developers are encouraged to migrate to newer toolchains and ARM-based Apple Silicon to ensure continued compatibility and performance.
- As part of efforts to resolve and reduce the risk of introducing CVEs the use of ImageMagick and related utilities are deprecated and will be removed over the coming two releases.
Fixed Bugs
| Issue | Description |
|---|---|
| SDHV-21737 | Fixed subwindows jumping when their bounds were close to -1.0 or 1.0 |
| SDHV-21735 | Restored segment display list performance for textured models |
| SDHV-21715 | Upgraded the zlib used by FreeType from 1.3.1 to 1.3.2 |
| SDHV-21680 | Fixed unexpected behavior with text backgrounds at the same insertion point |
| SDHV-21679 | Fixed HC_MUnSet_Spec_Face_Colors not unsetting all requested face colors |
| SDHV-21672 | Improved performance when editing faces of large shells with HC_Open_Face |
| SDHV-21662 | Improved OOC preprocessing performance for unsorted point clouds |
| SDHV-21658 | Fixed simple shadows disappearing after inserting geometry with shadows off |
| SDHV-21657 | Fixed missing shadows when geometry with a custom shader was in the scene |
| SDHV-21640 | Fixed unexpected behavior when enabling Static Model with PBR materials |
| SDHV-21629 | Improved performance after highlighting geometry with Static Model enabled |

