A3DCopyAndAdaptBrepModelData

struct A3DCopyAndAdaptBrepModelData

Copy and convert to NURBS parameter.

Index

Variables

Variables

A3DBool A3DCopyAndAdaptBrepModelData.m_bUseSameParam: A3DBool

If``A3D_TRUE``, surfaces will keep their parametrization when converted to NURBS.

Tolerance value of the resulting B-rep.

This value is relative to the scale of the model. We would suggest adapting it from the model bounding box

A3DBool A3DCopyAndAdaptBrepModelData.m_bDeleteCrossingUV: A3DBool

If``A3D_TRUE``, UV curves that cross seams of periodic surfaces are replaced by 3D curves.

A3DBool A3DCopyAndAdaptBrepModelData.m_bSplitFaces: A3DBool

If``A3D_TRUE``, the faces with a periodic basis surface are split on parametric seams.

A3DBool A3DCopyAndAdaptBrepModelData.m_bSplitClosedFaces: A3DBool

If``A3D_TRUE``, the faces with a closed basis surface are split into faces at the parametric seam and mid-parameter.

A3DBool A3DCopyAndAdaptBrepModelData.m_bForceComputeUV: A3DBool

If``A3D_TRUE``, UV curves are computed from the B-rep data.

If``A3D_TRUE``and m_bForceComputeUV is set to``A3D_TRUE``, computed UV curves can cross seams.

It will be automatically disabled if m_bSplitFaces or m_bSplitClosedFaces are set to``A3D_TRUE``.

9.0

A3DBool A3DCopyAndAdaptBrepModelData.m_bForceCompute3D: A3DBool

If``A3D_TRUE``, 3D curves are computed from the B-rep data.

A3DUns32 A3DCopyAndAdaptBrepModelData.m_uiAcceptableSurfacesSize: A3DUns32

Length of m_puiAcceptableSurfaces array.

A list of acceptable surface types that your modeler can handle.

Acceptable surface types are listed in:ref:A3DSDKTypes.h <a3_d_s_d_k_types_8h>and begin with ‘kA3DTypeSurf’

A3DUns32 A3DCopyAndAdaptBrepModelData.m_uiAcceptableCurvesSize: A3DUns32

Length of m_puiAcceptableCurves array.

A list of acceptable curve types that your modeler can handle.

Acceptable curve types are listed in:ref:A3DSDKTypes.h <a3_d_s_d_k_types_8h>and begin with ‘kA3DTypeCrv’

For preserving what has already been processed after an error occurs.

Use:c:func:~A3DCopyAndAdaptBrepModelAdvancedto get the error status.

A3DBool A3DCopyAndAdaptBrepModelData.m_bClampTolerantUVCurvesInsideUVDomain

If``A3D_FALSE``, UV curves may stray outside the UV domain as long as the 3D edge tolerance is respected.

If set to``A3D_TRUE``, the UV curves will be clamped to the UV domain (if the clamp still leaves them within the edge tolerance).

A3DBool A3DCopyAndAdaptBrepModelData.m_bForceDuplicateGeometries: A3DBool

If``A3D_TRUE``, break the sharing of surfaces and curves into topologies.