STEP <> NX v27.3
History
Revision |
Update Information |
|---|---|
1.0 |
Initial document release for Version 27.3 |
Product Codes
Product Code |
Product Description |
|---|---|
NXSTP-B1 |
NX ↔ STEP Bi-directional Base Product |
NXSTP-A1 |
NX ↔ STEP PMI Add-on Module |
Supported Application Revisions
The following application revisions have been qualified with this release.
Application |
Revision |
|---|---|
NX Versions |
2312, 2406, 2412 |
STEP |
HOOPS 24 SP8 |
Supported Operating Systems
The following operating systems have been qualified with this release.
Operating System |
Qualification Status |
|---|---|
Windows 10 |
Qualified and fully supported |
Windows 11 |
Qualified and fully supported |
Installation Process Considerations
Starting with version 20.0 of Theorem Solutions applications changes have been made to the installation process. These changes have transitioned from a JAVA based installer package to a standard Microsoft Installer (.msi) package. A current limitation of the Microsoft msi method is that the software cannot be installed directly on to either externally mapped or network drives when installed from a client machine:
Therefore, the installation must be performed to a drive that is local to the machine itself.
If you are attempting to install the software onto a network drive, then please refer to the configuration guide available from the following link:
http://www.theorem.com/documentation/Documentation/Client_Configuration.pdf.
Distribution Media
CD images of the latest release are available from the following download site. The installation media for the bi-directional product is also the same media when installing a uni-directional variant.
Product Codes |
Select link to download CD images |
|---|---|
All Product Codes for all supported versions of CATIA V5 |
|
Theorem User Interface |
|
Theorem License Manager |
New Features / Enhancements
The following new features or enhancements have been introduced with this release.
STEP - NX
Ref ID |
New Feature / Enhancement Description |
|---|---|
1 |
NX 2312, 2406, 2412 |
2 |
HOOPS 24 SP8 |
Requirements
The following list of Requirements are deployed with this release.
Requirement ID |
Brief Description |
|---|---|
Known Limitations and Restrictions
The following limitations and restrictions have been identified prior to release.
NX to STEP
Ref ID |
Limitations and Restrictions |
|---|---|
1 |
Writing AP 203 Edition 2 is support, Edition 1 is not. |
2 |
Writing AP 214 Edition 1 is support, Edition 2 and 3 are not. |
3 |
Writing AP 242 Edition 1 is support, Edition 2 and 3 are not. |
4 |
PMI is not supported |
STEP to NX
Ref ID |
Limitations and Restrictions |
|---|---|
1 |
PMI is supported using command line, but not from the UI |
General
Ref ID |
Limitations and Restrictions |
|---|---|
1 |
The minimum supported version of FlexLM is 11.19 |
Resolved Support Calls
The following list of Support Calls are resolved with this release.
Support Call ID |
Brief Description |
|---|---|
