NURBSSurfaceKit
-
class NURBSSurfaceKit : public HPS::Kit
The NURBSSurfaceKit class is a user space object. It is a kit analog to a NURBSSurfaceKey.
Public Functions
-
void Consume(NURBSSurfaceKit &in_kit)
Copies the source NURBSSurfaceKit into this NURBSSurfaceKit and resets the source kit.
- Parameters:
in_kit – The source NURBSSurfaceKit to consume.
-
NURBSSurfaceKit &EditPointsByDeletion(size_t in_offset, size_t in_count)
Removes points from the control point list for this NURBSSurfaceKit.
- Parameters:
in_offset – The offset into the control point list for the NURBSSurfaceKit at which to start removing points. This value must be such that in_offset<control_point_count for deletion to succeed.
in_count – The number of points to delete from the control point list for the NURBSSurfaceKit. This value must be such that in_offset+in_count<=control_point_count for the deletion to succeed.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditPointsByInsertion(size_t in_offset, PointArray const &in_points)
Adds points to the control point list for this NURBSSurfaceKit.
- Parameters:
in_offset – The offset into the control point list for the NURBSSurfaceKit at which to insert points. This value must be such that in_offset <= control_point_count for insertion to succeed.
in_points – The points to insert into the control point list at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditPointsByInsertion(size_t in_offset, size_t in_count, Point const in_points[])
Adds points to the control point list for this NURBSSurfaceKit.
- Parameters:
in_offset – The offset into the control point list for the NURBSSurfaceKit at which to insert points. This value must be such that in_offset <= control_point_count for insertion to succeed.
in_count – Size of the following array.
in_points – The points to insert into the control point list at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditPointsByReplacement(size_t in_offset, PointArray const &in_points)
Replaces control points for this NURBSSurfaceKit.
- Parameters:
in_offset – The offset into the control point list for the NURBSSurfaceKit at which to replace points. This value must be such that in_offset<control_point_count for insertion to succeed.
in_points – The points to use to replace those in the control point list at the specified offset. This size of the array must be such that in_offset+in_points.size()<=control_point_count for the replacement to succeed.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditPointsByReplacement(size_t in_offset, size_t in_count, Point const in_points[])
Replaces control points for this NURBSSurfaceKit.
- Parameters:
in_offset – The offset into the control point list for the NURBSSurfaceKit at which to replace points. This value must be such that in_offset<control_point_count for insertion to succeed.
in_count – Size of the following array. This value must be such that in_offset+in_count<=control_point_count for the replacement to succeed.
in_points – The points to use to replace those in the control point list at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditUKnotsByDeletion(size_t in_offset, size_t in_count)
Removes knots in the U direction for this NURBSSurfaceKit. This will allow modification of the default knots in the U direction if no such explicit knots are set if possible.
- Parameters:
in_offset – The offset into the knots in the U direction for the NURBSSurfaceKit at which to start removing knots. This value must be such that in_offset<u_count+u_degree+1 for deletion to succeed.
in_count – The number of knots in the U direction to delete for the NURBSSurfaceKit. This value must be such that in_offset+in_count<=u_count+u_degree+1 for the deletion to succeed.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditUKnotsByInsertion(size_t in_offset, FloatArray const &in_knots)
Adds knots in the U direction for this NURBSSurfaceKit. This will allow modification of the default knots in the U direction if no such explicit knots are set if possible.
- Parameters:
in_offset – The offset into the knots in the U direction for the NURBSSurfaceKit at which to insert knots. This value must be such that in_offset<u_count+u_degree+1 for insertion to succeed.
in_knots – The knots to insert in the U direction at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditUKnotsByInsertion(size_t in_offset, size_t in_count, float const in_knots[])
Adds knots in the U direction for this NURBSSurfaceKit. This will allow modification of the default knots in the U direction if no such explicit knots are set if possible.
- Parameters:
in_offset – The offset into the knots in the U direction for the NURBSSurfaceKit at which to insert knots. This value must be such that in_offset<u_count+u_degree+1 for insertion to succeed.
in_count – Size of the following array.
in_knots – The knots to insert in the U direction at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditUKnotsByReplacement(size_t in_offset, FloatArray const &in_knots)
Replaces knots in the U direction for this NURBSSurfaceKit. This will allow modification of the default knots in the U direction if no such explicit knots are set if possible.
- Parameters:
in_offset – The offset into the knots in the U direction for the NURBSSurfaceKit at which to replace knots. This value must be such that in_offset<u_count+u_degree+1 for the replacement to succeed.
in_knots – The knots to use to replace those in the U direction at the specified offset. The size of the array must be such that in_offset+in_knots.size()<=u_count+u_degree+1 for the replacement to succeed.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditUKnotsByReplacement(size_t in_offset, size_t in_count, float const in_knots[])
Replaces knots in the U direction for this NURBSSurfaceKit. This will allow modification of the default knots in the U direction if no such explicit knots are set if possible.
- Parameters:
in_offset – The offset into the knots in the U direction for the NURBSSurfaceKit at which to replace knots. This value must be such that in_offset<u_count+u_degree+1 for the replacement to succeed.
in_count – Size of the following array. This value must be such that in_offset+in_count<=u_count+u_degree+1 for the replacement to succeed.
in_knots – The knots to use to replace those in the U direction at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditVKnotsByDeletion(size_t in_offset, size_t in_count)
Removes knots in the V direction for this NURBSSurfaceKit. This will allow modification of the default knots in the V direction if no such explicit knots are set if possible.
- Parameters:
in_offset – The offset into the knots in the V direction for the NURBSSurfaceKit at which to start removing knots. This value must be such that in_offset<v_count+v_degree+1 for deletion to succeed.
in_count – The number of knots in the V direction to delete for the NURBSSurfaceKit. This value must be such that in_offset+in_count<=v_count+v_degree+1 for the deletion to succeed.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditVKnotsByInsertion(size_t in_offset, FloatArray const &in_knots)
Adds knots in the V direction for this NURBSSurfaceKit. This will allow modification of the default knots in the V direction if no such explicit knots are set if possible.
- Parameters:
in_offset – The offset into the knots in the V direction for the NURBSSurfaceKit at which to insert knots. This value must be such that in_offset<v_count+v_degree+1 for insertion to succeed.
in_knots – The knots to insert in the V direction at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditVKnotsByInsertion(size_t in_offset, size_t in_count, float const in_knots[])
Adds knots in the V direction for this NURBSSurfaceKit. This will allow modification of the default knots in the V direction if no such explicit knots are set if possible.
- Parameters:
in_offset – The offset into the knots in the V direction for the NURBSSurfaceKit at which to insert knots. This value must be such that in_offset<v_count+v_degree+1 for insertion to succeed.
in_count – Size of the following array.
in_knots – The knots to insert in the V direction at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditVKnotsByReplacement(size_t in_offset, FloatArray const &in_knots)
Replaces knots in the V direction for this NURBSSurfaceKit. This will allow modification of the default knots in the V direction if no such explicit knots are set if possible.
- Parameters:
in_offset – The offset into the knots in the V direction for the NURBSSurfaceKit at which to replace knots. This value must be such that in_offset<v_count+v_degree+1 for the replacement to succeed.
in_knots – The knots to use to replace those in the V direction at the specified offset. The size of the array must be such that in_offset+in_knots.size()<=v_count+v_degree+1 for the replacement to succeed.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditVKnotsByReplacement(size_t in_offset, size_t in_count, float const in_knots[])
Replaces knots in the V direction for this NURBSSurfaceKit. This will allow modification of the default knots in the V direction if no such explicit knots are set if possible.
- Parameters:
in_offset – The offset into the knots in the V direction for the NURBSSurfaceKit at which to replace knots. This value must be such that in_offset<v_count+v_degree+1 for the replacement to succeed.
in_count – Size of the following array. This value must be such that in_offset+in_count<=v_count+v_degree+1 for the replacement to succeed.
in_knots – The knots to use to replace those in the V direction at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditWeightsByDeletion(size_t in_offset, size_t in_count)
Removes weights from the control point weight list for this NURBSSurfaceKit. This will allow modification of the default control point weights if no explicit weights are set if possible.
- Parameters:
in_offset – The offset into the control point weight list for the NURBSSurfaceKit at which to start removing weights. This value must be such that in_offset<control_point_count for deletion to succeed.
in_count – The number of weights to delete from the control point weight list for the NURBSSurfaceKit. This value must be such that in_offset+in_count<=control_point_count for the deletion to succeed.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditWeightsByInsertion(size_t in_offset, FloatArray const &in_weights)
Adds weights to the control point weight list for this NURBSSurfaceKit. This will allow modification of the default control point weights if no explicit weights are set if possible.
- Parameters:
in_offset – The offset into the control point weight list for the NURBSSurfaceKit at which to insert weights. This value must be such that in_offset<control_point_count for insertion to succeed.
in_weights – The weights to insert into the control point weight list at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditWeightsByInsertion(size_t in_offset, size_t in_count, float const in_weights[])
Adds weights to the control point weight list for this NURBSSurfaceKit. This will allow modification of the default control point weights if no explicit weights are set if possible.
- Parameters:
in_offset – The offset into the control point weight list for the NURBSSurfaceKit at which to insert weights. This value must be such that in_offset<control_point_count for insertion to succeed.
in_count – Size of the following array.
in_weights – The weights to insert into the control point weight list at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditWeightsByReplacement(size_t in_offset, FloatArray const &in_weights)
Replaces control point weights for this NURBSSurfaceKit. This will allow modification of the default control point weights if no explicit weights are set if possible.
- Parameters:
in_offset – The offset into the control point weight list for the NURBSSurfaceKit at which to replace weights. This value must be such that in_offset<control_point_count for insertion to succeed.
in_weights – The weights to use to replace those in the control point weight list at the specified offset. This size of the array must be such that in_offset+in_weights.size()<=control_point_count for the replacement to succeed.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &EditWeightsByReplacement(size_t in_offset, size_t in_count, float const in_weights[])
Replaces control point weights for this NURBSSurfaceKit. This will allow modification of the default control point weights if no explicit weights are set if possible.
- Parameters:
in_offset – The offset into the control point weight list for the NURBSSurfaceKit at which to replace weights. This value must be such that in_offset<control_point_count for insertion to succeed.
in_count – Size of the following array. This value must be such that in_offset+in_count<=control_point_count for the replacement to succeed.
in_weights – The weights to use to replace those in the control point weight list at the specified offset.
- Returns:
A reference to this NURBSSurfaceKit.
-
virtual bool Empty() const
Indicates whether this NURBSSurfaceKit has any values set on it.
- Returns:
true if no values are set on this NURBSSurfaceKit, false otherwise.
-
bool Equals(NURBSSurfaceKit const &in_kit) const
Check if the source NURBSSurfaceKit is equivalent to this NURBSSurfaceKit.
- Parameters:
in_kit – The source NURBSSurfaceKit to compare to this NURBSSurfaceKit.
- Returns:
true if the objects are equivalent, false otherwise.
-
size_t GetPointCount() const
Retrieves the number of points in this NURBS surface.
- Returns:
The number of points in this NURBS surface.
-
NURBSSurfaceKit()
The default constructor creates an empty NURBSSurfaceKit object.
-
NURBSSurfaceKit(NURBSSurfaceKit &&in_that)
The move constructor creates a NURBSSurfaceKit by transferring the underlying impl of the rvalue reference to this NURBSSurfaceKit thereby avoiding a copy and allocation.
- Parameters:
in_that – An rvalue reference to a NURBSSurfaceKit to take the impl from.
-
NURBSSurfaceKit(NURBSSurfaceKit const &in_kit)
The copy constructor creates a new NURBSSurfaceKit object that contains the same settings as the source NURBSSurfaceKit.
- Parameters:
in_kit – The source NURBSSurfaceKit to copy.
-
inline virtual HPS::Type ObjectType() const
This function returns the type the object, as declared (if the object is derived, this does not give the true type of the derived object).
- Returns:
The declared type of the object in question, which may differ from the true, underlying type.
-
bool operator!=(NURBSSurfaceKit const &in_kit) const
Check if the source NURBSSurfaceKit is not equivalent to this NURBSSurfaceKit.
- Parameters:
in_kit – The source NURBSSurfaceKit to compare to this NURBSSurfaceKit.
- Returns:
true if the objects are not equivalent, false otherwise.
-
NURBSSurfaceKit &operator=(NURBSSurfaceKit &&in_that)
The move assignment operator transfers the underlying impl of the rvalue reference to this NURBSSurfaceKit thereby avoiding a copy.
- Parameters:
in_that – An rvalue reference to a NURBSSurfaceKit to take the impl from.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &operator=(NURBSSurfaceKit const &in_kit)
Copies the source NURBSSurfaceKit into this NURBSSurfaceKit.
- Parameters:
in_kit – The source NURBSSurfaceKit to copy.
- Returns:
A reference to this NURBSSurfaceKit.
-
bool operator==(NURBSSurfaceKit const &in_kit) const
Check if the source NURBSSurfaceKit is equivalent to this NURBSSurfaceKit.
- Parameters:
in_kit – The source NURBSSurfaceKit to compare to this NURBSSurfaceKit.
- Returns:
true if the objects are equivalent, false otherwise.
-
void Set(NURBSSurfaceKit const &in_kit)
Copies the source NURBSSurfaceKit into this NURBSSurfaceKit.
- Parameters:
in_kit – The source NURBSSurfaceKit to copy.
-
NURBSSurfaceKit &SetPoints(PointArray const &in_points)
Sets the control points for the NURBSSurfaceKit.
- Parameters:
in_points – The control points for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetPoints(size_t in_count, Point const in_points[])
Sets the control points for the NURBSSurfaceKit.
- Parameters:
in_count – Size of the following array.
in_points – The control points for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetPriority(int in_priority)
Assigns a specific drawing priority value to the NURBSSurfaceKit. It affects the order in which the contents of this segment are drawn if and only if the rendering algorithm is set to Priority.
See also
SubwindowKit::SetPriority()
- Parameters:
in_priority – The drawing priority, higher priority items are drawn on top of lower priority items.
- Returns:
A reference to this object.
-
NURBSSurfaceKit &SetTrim(TrimKit const &in_trim)
Sets the trim for the NURBSSurfaceKit.
- Parameters:
in_trim – The trim for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetTrims(size_t in_count, TrimKit const in_trims[])
Sets the trims for the NURBSSurfaceKit.
- Parameters:
in_count – Size of the following array.
in_trims – The trims for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetTrims(TrimKitArray const &in_trims)
Sets the trims for the NURBSSurfaceKit.
- Parameters:
in_trims – The trims for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetUCount(size_t in_count)
Sets the number of control points in the U direction for the NURBSSurfaceKit.
- Parameters:
in_count – The number of control points in the U direction for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetUDegree(size_t in_degree)
Sets degree of the NURBSSurfaceKit in the U direction.
- Parameters:
in_degree – The degree of the NURBSSurfaceKit in the U direction.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetUKnots(FloatArray const &in_knots)
Sets the knots in the U direction for the NURBSSurfaceKit. If no knots are set when this kit is used to insert a NURBS surface, default knots of increasing value in the range [0,u_count+u_degree+1) will be used.
- Parameters:
in_knots – The knots in the U direction for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetUKnots(size_t in_count, float const in_knots[])
Sets the knots in the U direction for the NURBSSurfaceKit. If no knots are set when this kit is used to insert a NURBS surface, default knots of increasing value in the range [0,u_count+u_degree+1) will be used.
- Parameters:
in_count – Size of the following array.
in_knots – The knots in the U direction for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetUserData(intptr_t in_index, ByteArray const &in_data)
Sets user data on this kit.
- Parameters:
in_index – The index of the user data to set.
in_data – The bytes of user data to set.
- Returns:
A reference to this kit.
-
NURBSSurfaceKit &SetUserData(intptr_t in_index, size_t in_bytes, byte const in_data[])
Sets user data on this kit.
- Parameters:
in_index – The index of the user data to set.
in_bytes – The number of bytes of user data to set.
in_data – The bytes of user data to set.
- Returns:
A reference to this kit.
-
NURBSSurfaceKit &SetUserData(IntPtrTArray const &in_indices, ByteArrayArray const &in_data)
Sets user data on this kit.
- Parameters:
in_indices – An array of user data indices to set.
in_data – An array of bytes of user data to set.
- Returns:
A reference to this kit.
-
NURBSSurfaceKit &SetVCount(size_t in_count)
Sets the number of control points in the V direction for the NURBSSurfaceKit.
- Parameters:
in_count – The number of control points in the V direction for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetVDegree(size_t in_degree)
Sets degree of the NURBSSurfaceKit in the V direction.
- Parameters:
in_degree – The degree of the NURBSSurfaceKit in the V direction.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetVKnots(FloatArray const &in_knots)
Sets the knots in the V direction for the NURBSSurfaceKit. If no knots are set when this kit is used to insert a NURBS surface, default knots of increasing value in the range [0,v_count+v_degree+1) will be used.
- Parameters:
in_knots – The knots in the V direction for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetVKnots(size_t in_count, float const in_knots[])
Sets the knots in the V direction for the NURBSSurfaceKit. If no knots are set when this kit is used to insert a NURBS surface, default knots of increasing value in the range [0,v_count+v_degree+1) will be used.
- Parameters:
in_count – Size of the following array.
in_knots – The knots in the V direction for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetWeights(FloatArray const &in_weights)
Sets the control point weights for the NURBSSurfaceKit. If no weights are set when this kit is used to insert a NURBS surface, default weights of 1.0f per control point will be used.
- Parameters:
in_weights – The control point weights for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &SetWeights(size_t in_count, float const in_weights[])
Sets the control point weights for the NURBSSurfaceKit. If no weights are set when this kit is used to insert a NURBS surface, default weights of 1.0f per control point will be used.
- Parameters:
in_count – Size of the following array.
in_weights – The control point weights for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
void Show(NURBSSurfaceKit &out_kit) const
Copies this NURBSSurfaceKit into the given NURBSSurfaceKit.
- Parameters:
out_kit – The NURBSSurfaceKit to populate with the contents of this NURBSSurfaceKit.
-
bool ShowPoints(PointArray &out_points) const
Shows the control points for this NURBSSurfaceKit.
- Parameters:
out_points – The control points for this NURBSSurfaceKit.
- Returns:
true if control points were set, false otherwise.
-
bool ShowPointsByList(size_t in_count, size_t const in_indices[], PointArray &out_points) const
Show a subset of the points for this NURBSSurfaceKit by list.
- Parameters:
in_count – The number of points to show.
in_indices – The list of point indices to show.
out_points – The requested points for this NURBSSurfaceKit.
- Returns:
true if all requested points were set, false otherwise.
-
bool ShowPointsByList(SizeTArray const &in_indices, PointArray &out_points) const
Show a subset of the points for this NURBSSurfaceKit by list.
- Parameters:
in_indices – The list of point indices to show.
out_points – The requested points for this NURBSSurfaceKit.
- Returns:
true if all requested points were set, false otherwise.
-
bool ShowPointsByRange(size_t in_start_index, size_t in_count, PointArray &out_points) const
Show a subset of the points for this NURBSSurfaceKit by range.
- Parameters:
in_start_index – The first point to show.
in_count – The number of points to show.
out_points – The requested points for this NURBSSurfaceKit.
- Returns:
true if all requested points were set, false otherwise.
-
bool ShowPriority(int &out_priority) const
Shows the drawing priority.
- Parameters:
out_priority – The drawing priority, higher priority items are drawn on top of lower priority items.
- Returns:
true if the setting is valid, false otherwise.
-
bool ShowTrims(TrimKitArray &out_trims) const
Shows the trims for this NURBSSurfaceKit.
- Parameters:
out_trims – The trims for this NURBSSurfaceKit.
- Returns:
true if trims were set, false otherwise.
-
bool ShowUCount(size_t &out_count) const
Shows the number of control points in the U direction for this NURBSSurfaceKit.
- Parameters:
out_count – The number of control points in the U direction for this NURBSSurfaceKit.
- Returns:
true if such a count was set, false otherwise.
-
bool ShowUDegree(size_t &out_degree) const
Shows the degree of this NURBSSurfaceKit in the U direction.
- Parameters:
out_degree – The degree of this NURBSSurfaceKit in the U direction.
- Returns:
true if such a degree was set, false otherwise.
-
bool ShowUKnots(FloatArray &out_knots) const
Shows the knots in the U direction for this NURBSSurfaceKit.
- Parameters:
out_knots – The knots in the U direction for this NURBSSurfaceKit.
- Returns:
true if these knots were set, false otherwise.
-
bool ShowUserData(intptr_t in_index, ByteArray &out_data) const
Shows the user data at a given index for this kit.
- Parameters:
in_index – The index of the user data to show.
out_data – The user data at the given index.
- Returns:
true if there is user data at the given index, false otherwise.
-
bool ShowUserData(IntPtrTArray &out_indices, ByteArrayArray &out_data) const
Shows all user data for this kit.
- Parameters:
out_indices – An array of all user data indices set on this kit.
out_data – An array of all user data set on this kit.
- Returns:
true if there is user data on this kit, false otherwise.
-
size_t ShowUserDataCount() const
Get the number of user data indices set on this kit.
-
bool ShowUserDataIndices(IntPtrTArray &out_indices) const
Shows the indices of all user data set on this kit.
- Parameters:
out_indices – The user data indices set on this kit.
- Returns:
The number of user data indices set on this kit.
-
bool ShowVCount(size_t &out_count) const
Shows the number of control points in the V direction for this NURBSSurfaceKit.
- Parameters:
out_count – The number of control points in the V direction for this NURBSSurfaceKit.
- Returns:
true if such a count was set, false otherwise.
-
bool ShowVDegree(size_t &out_degree) const
Shows the degree of this NURBSSurfaceKit in the V direction.
- Parameters:
out_degree – The degree of this NURBSSurfaceKit in the V direction.
- Returns:
true if such a degree was set, false otherwise.
-
bool ShowVKnots(FloatArray &out_knots) const
Shows the knots in the V direction for this NURBSSurfaceKit.
- Parameters:
out_knots – The knots in the V direction for this NURBSSurfaceKit.
- Returns:
true if these knots were set, false otherwise.
-
bool ShowWeights(FloatArray &out_weights) const
Shows the control point weights for this NURBSSurfaceKit.
- Parameters:
out_weights – The control point weights for this NURBSSurfaceKit.
- Returns:
true if control point weights were set, false otherwise.
-
NURBSSurfaceKit &UnsetAllUserData()
Removes all user data from this kit.
- Returns:
A reference to this kit.
-
NURBSSurfaceKit &UnsetEverything()
Removes all settings from the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &UnsetPoints()
Removes the control points for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &UnsetPriority()
Removes a drawing priority setting.
- Returns:
A reference to this object.
-
NURBSSurfaceKit &UnsetTrims()
Removes the trims from the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &UnsetUCount()
Removes the setting for the number of points in the U direction for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &UnsetUDegree()
Removes the setting for the degree of the NURBSSurfaceKit in the U direction.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &UnsetUKnots()
Removes the knots in the U direction for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &UnsetUserData(intptr_t in_index)
Removes the user data at the given index from this kit.
- Parameters:
in_index – The index of the user data to remove.
- Returns:
A reference to this kit.
-
NURBSSurfaceKit &UnsetUserData(IntPtrTArray const &in_indices)
Removes the user data at the given indices from this kit.
- Parameters:
in_indices – The indices of the user data to remove.
- Returns:
A reference to this kit.
-
NURBSSurfaceKit &UnsetUserData(size_t in_count, intptr_t const in_indices[])
Removes the user data at the given indices from this kit.
- Parameters:
in_count – The size of the following array.
in_indices – The indices of the user data to remove.
- Returns:
A reference to this kit.
-
NURBSSurfaceKit &UnsetVCount()
Removes the setting for the number of points in the V direction for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &UnsetVDegree()
Removes the setting for the degree of the NURBSSurfaceKit in the V direction.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &UnsetVKnots()
Removes the knots in the V direction for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
NURBSSurfaceKit &UnsetWeights()
Removes the control point weights for the NURBSSurfaceKit.
- Returns:
A reference to this NURBSSurfaceKit.
-
virtual ~NURBSSurfaceKit()
-
void Consume(NURBSSurfaceKit &in_kit)